CIRCL
/
Circlean
mirror of https://github.com/CIRCL/Circlean
2
0
Fork 0
Code Issues Releases Wiki Activity

chg: Auto compute offset/size when mounting the image

pull/68/head
Raphaël Vinot 2018-01-29 14:20:58 +01:00
parent 87aeb6a919
commit 4352da90e9
2 changed files with 35 additions and 55 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

73
doc/setup_with_proot.md
View File

@ -56,66 +56,39 @@ file yields an unlimited number of "0x00" bytes.
```
> dd if=/dev/zero bs=1024k count=2048 >> XXXX-XX-XX-raspbian-jessie-lite.img
```
* Expand the root (second) partition using fdisk. The first partition listed is the boot
partition, which shouldn't be changed. In the new partition, the "First sector" should be
the value that was the "start" sector of the old root partition (137216 in the example
below, but this varies depending on the version of the Raspbian image). The "Last sector"
should be the default, and it should be significantly larger than it was before (6909951 vs.
2715647 in the example).
* Expand the root (second) partition using sfdisk:
```
> fdisk XXXX-XX-XX-raspbian-jessie-lite.img
> echo ", +" | sfdisk -N 2 XXXX-XX-XX-raspbian-jessie-lite.img
Checking that no-one is using this disk right now ... OK
Command (m for help): *p*
Disk XXXX-XX-XX-raspbian-jessie-lite.img: 3.3 GiB, 3537895424 bytes, 6909952 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x244b8248
Disk 2017-11-29-raspbian-stretch-lite.img: 3.7 GiB, 4005560320 bytes, 7823360 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x37665771
Device Boot Start End Sectors Size Id Type
XXXX-XX-XX-raspbian-jessie-lite.img1 8192 137215 129024 63M c W95 FAT32 (LBA)
XXXX-XX-XX-raspbian-jessie-lite.img2 137216 2715647 2578432 1.2G 83 Linux
Old situation:
Command (m for help): *d*
Partition number (1,2, default 2): *2*
Device Boot Start End Sectors Size Id Type
2017-11-29-raspbian-stretch-lite.img1 8192 93236 85045 41.5M c W95 FAT32 (LBA)
2017-11-29-raspbian-stretch-lite.img2 94208 3629055 3534848 1.7G 83 Linux
Partition 2 has been deleted.
2017-11-29-raspbian-stretch-lite.img2:
New situation:
Disklabel type: dos
Disk identifier: 0x37665771
Command (m for help): *n*
Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p):
Device Boot Start End Sectors Size Id Type
2017-11-29-raspbian-stretch-lite.img1 8192 93236 85045 41.5M c W95 FAT32 (LBA)
2017-11-29-raspbian-stretch-lite.img2 94208 7823359 7729152 3.7G 83 Linux
Using default response p.
Partition number (2-4, default 2):
First sector (2048-6852607, default 2048): *137216*
Last sector, +sectors or +size{K,M,G,T,P} (131216-6909951, default 6909951):
Created a new partition 2 of type 'Linux' and of size 3.2 GiB.
Command (m for help): *w*
The partition table has been altered.
Syncing disks.
The partition table has been altered.
Syncing disks.
```
* Mount the image in loop mode: first, edit shell_utils/basic_mount_image.sh to use the
proper values for $BOOT_START and $ROOT_START, which you can obtain using fdisk and "p"
as in the previous step. You must also change $IMAGE to the correct path. Then run:
```
sudo ./shell_utils/basic_mount_image.md
```
* Verify the path to the mounted partitions in /dev, and resize the root (larger) filesystem
to fill the new larger partition using resize2fs:
```
> df | grep /mnt/arm
/dev/loop0 3927752 1955672 1794172 53% /mnt/rpi-root
/dev/loop1 57288 18960 38328 34% /mnt/rpi-boot
> sudo resize2fs /dev/loop0
```
* Edit shell_utils/basic_mount_image.sh to use the correct image path ($IMAGE)
Installing the dependencies
===========================

17
shell_utils/basic_mount_image.sh
View File

@ -17,23 +17,30 @@ set -x
# Double check the path and offsets as noted above!
# Path to the image
IMAGE='New_Circlean.img'
IMAGE='2018-01-29_CIRCLean.img'
# Start sector of boot (first) partition
BOOT_START=8192
BOOT_START=`sfdisk -J ${IMAGE} | grep img1 | sed -n 's/.*"start": \([[:digit:]]*\).*/\1/p'`
# Amount of sectors of boot (first) partition
BOOT_SIZE=`sfdisk -J ${IMAGE} | grep img1 | sed -n 's/.*"size": \([[:digit:]]*\).*/\1/p'`
# Start sector of root (second) partition
ROOT_START=92160
ROOT_START=`sfdisk -J ${IMAGE} | grep img2 | sed -n 's/.*"start": \([[:digit:]]*\).*/\1/p'`
# Amount of sectors of root (second) partition
ROOT_SIZE=`sfdisk -J ${IMAGE} | grep img2 | sed -n 's/.*"size": \([[:digit:]]*\).*/\1/p'`
# Locations you'd like the partitions mounted
BOOT_PATH='/mnt/rpi-boot'
ROOTFS_PATH='/mnt/rpi-root'
# Calculate offsets for each partition
offset_boot=$((${BOOT_START} * 512))
sizelimit_boot=$((${BOOT_SIZE} * 512))
offset_rootfs=$((${ROOT_START} * 512))
sizelimit_rootfs=$((${ROOT_SIZE} * 512))
# TODO: add logic for creating directories if they aren't already there
mkdir -p ${BOOT_PATH}
mkdir -p ${ROOTFS_PATH}
# Mount each partition in loop mode
mount -o loop,offset=${offset_boot} ${IMAGE} ${BOOT_PATH}
mount -o loop,offset=${offset_rootfs} ${IMAGE} ${ROOTFS_PATH}
mount -o loop,offset=${offset_boot},sizelimit=${sizelimit_boot} ${IMAGE} ${BOOT_PATH}
mount -o loop,offset=${offset_rootfs},sizelimit=${sizelimit_rootfs} ${IMAGE} ${ROOTFS_PATH}
echo "Image mounted" 1>&2