From 4a45f989c7b28db7cfb9cbaa806b28caef072e3e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rapha=C3=ABl=20Vinot?= Date: Thu, 6 Jun 2013 12:30:10 +0300 Subject: [PATCH] Update README.md add details on the power supply --- README.md | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 06f5463..643b62f 100644 --- a/README.md +++ b/README.md @@ -34,10 +34,15 @@ Usage 0. Power off the device 1. Plug the untrusted key in the top usb slot of the Raspberry Pi 2. Plug your own key in the bottom usb slot - Note: This key should be bigger than the original one because the archives - will be copyed + + *Note*: This key should be bigger than the original one because the archives + will be copyed + 3. Optional: connect the HDMI cable to a screen to see what happen 4. Connect the power to the micro USB + + *Note*: 5V, 700mA regulated power supply + 5. Wait until you do not see any blinking green light on the board, or if you connected the HDMI cable, check the screen it's slow and can take 30-60 minutes depending on how many document