doc update

NOTES

@@ -1,49 +1,3 @@
-Why/What
-========
-
-This project aims to be used in case you got an USB key you do not know what is
-contains but still want to have a look.
-
-Work in progress, contributions welcome:
-
-The content of the first key will be copyed or/and converted to the second key
-following theses rules (based on the mime type):
-- direct copy of plain text files (mime type: text/*)
-- direct copy of audio files (mime type: audio/*)
-- direct copy of image files (mime type: image/*)
-- direct copy of video files (mime type: video/*)
-- direct copy of example files (mime type: example/*)
-- direct copy of message files (mime type: message/*)
-- direct copy of model files (mime type: model/*)
-- direct copy of multipart files (mime type: multipart/*)
-- Copying or converting the application files this way (mime type: application/*):
-  - pdf => HTML
-  - msword|vnd.openxmlformats-officedocument.*|vnd.ms-*|vnd.oasis.opendocument* => pdf => html
-  - *xml* => copy as a text file
-  - x-dosexec (executable) => prepend and append DANGEROUS to the filename
-  - x-gzip|x-tar|x-7z-compressed => compressed file
-  - octet-stream => direct copy
-
-Compressed files (x-gzip|x-tar|x-7z-compressed):
-- Unpacking of archives
-- Recursively run the rules on the unpacked files
-
-Usage
-=====
-
-0. Power off the device
-1. Plug the untrusted key in the top usb slot of the Raspberry Pi
-2. Plug your own key in the bottom usb slot
-   Note: This key should be bigger than the original one because the archives
-   will be copyed
-3. Optional: connect the HDMI cable to a screen to see what happen
-4. Connect the power to the micro USB
-5. Wait until you do not see any blinking green light on the board, or if you
-   connected the HDMI cable, check the screen
-   it's slow and can take 30-60 minutes depending on how many document
-   conversions take place
-6. Power off the device and disconnect the drives
-
 Notes
 =====
 

README.md

@@ -0,0 +1,69 @@
+Why/What
+========
+
+This project aims to be used in case you got an USB key you do not know what is
+contains but still want to have a look.
+
+Work in progress, contributions welcome:
+
+The content of the first key will be copyed or/and converted to the second key
+following theses rules (based on the mime type):
+- direct copy of plain text files (mime type: text/*)
+- direct copy of audio files (mime type: audio/*)
+- direct copy of image files (mime type: image/*)
+- direct copy of video files (mime type: video/*)
+- direct copy of example files (mime type: example/*)
+- direct copy of message files (mime type: message/*)
+- direct copy of model files (mime type: model/*)
+- direct copy of multipart files (mime type: multipart/*)
+- Copying or converting the application files this way (mime type: application/*):
+  - pdf => HTML
+  - msword|vnd.openxmlformats-officedocument.*|vnd.ms-*|vnd.oasis.opendocument* => pdf => html
+  - *xml* => copy as a text file
+  - x-dosexec (executable) => prepend and append DANGEROUS to the filename
+  - x-gzip|x-tar|x-7z-compressed => compressed file
+  - octet-stream => direct copy
+
+Compressed files (x-gzip|x-tar|x-7z-compressed):
+- Unpacking of archives
+- Recursively run the rules on the unpacked files
+
+Usage
+=====
+
+0. Power off the device
+1. Plug the untrusted key in the top usb slot of the Raspberry Pi
+2. Plug your own key in the bottom usb slot
+   Note: This key should be bigger than the original one because the archives
+   will be copyed
+3. Optional: connect the HDMI cable to a screen to see what happen
+4. Connect the power to the micro USB
+5. Wait until you do not see any blinking green light on the board, or if you
+   connected the HDMI cable, check the screen
+   it's slow and can take 30-60 minutes depending on how many document
+   conversions take place
+6. Power off the device and disconnect the drives
+
+Helper scripts
+==============
+
+You should use them as example when you are creating a new image and probably not
+run them blindly as you will most probably have to change constraints accordingly to
+your configuration.
+
+IN ALL CASES, PLEASE READ THE COMMENTS IN THE SCRIPTS AT LEAST ONCE.
+
+* proper_chroot.sh: uses qemu to chroot into a raspbian instance (.img or SD Card)
+* prepare_rPI_builder.sh: update the system, add the repositories and install all
+    the dependencies needed to compile poppler and pdf2htmlEX on a rPi
+* update_builder.sh: compile the latest version of poppler from debian experimental,
+    pull and compile the latest version of pdf2htmlEX from the git repository
+* prepare_rPI.sh: update the system, install the dependencies of poppler and pdf2htmlEX,
+    install poppler and pdf2htmlEX (the deb packages compiled in the builder)
+* create_user.sh: create the user who will run the scripts, assign the proper sudo rights.
+* copy_to_final.sh: populate the content of the directory fs/ in the image,
+    contains a sample of dd command to write the image on the SD card.
+    *TAKE CARE NOT USING THE WRONG DESTINATION*
+
+
+

copy_to_final.sh

@@ -18,4 +18,5 @@ tar -xzf backup.tar.gz -C ${CHROOT_PATH}/
 
 # /!\ always try to mount the root partition on the SD, it is usually broken.
 # if it is, use fdisk to remove the second partition and recreate it (you will
-# not lose the data)
+# not lose the data).
+# See resize_img.md

prepare_rPI_builder.sh

@@ -1,6 +1,5 @@
 #!/bin/bash
 
-
 # change locales to en_US.UTF-8
 dpkg-reconfigure locales
 
@@ -21,14 +20,8 @@ apt-get update
 #    liblcms2-dev gtk-doc-tools libgirepository1.0-dev gobject-introspection libglib2.0-doc \
 #    libcairo2-doc
 apt-get build-dep poppler
-apt-get -b source -t experimental poppler
-# Note: libpoppler-private-dev is not listed in the dependencies of pdf2htmlEX
-# but still needed because of poppler-config.h
-dpkg -i libpoppler-dev* libpoppler28* libpoppler-private-dev*
 
-git clone https://github.com/coolwanglu/pdf2htmlEX.git
+# build dependencies of pdf2htmlEX
-cd pdf2htmlEX/
-# build Deps
 apt-get install cmake libfontforge-dev libspiro-dev python-dev
 
-dpkg-buildpackage -uc -b
+git clone https://github.com/coolwanglu/pdf2htmlEX.git

proper_chroot.sh

@@ -1,5 +1,10 @@
 #!/bin/bash
 
+# Notes:
+# - To chroot in an existing SD card, unset IMAGE. Change the paths to the partitions if needed.
+# - The offsets are thoses of 2013-02-09-wheezy-raspbian.img. It will change on an other image.
+#   To get the offsets, use the "file" command.
+
 if [ "$(id -u)" != "0" ]; then
    echo "This script must be run as root" 1>&2
    exit 1
@@ -14,13 +19,14 @@ set -e
 set -x
 
 # If you use a partition...
-#PARTITION_ROOTFS='/dev/mmcblk0p2'
+PARTITION_ROOTFS='/dev/mmcblk0p2'
-#PARTITION_BOOT='/dev/mmcblk0p1'
+PARTITION_BOOT='/dev/mmcblk0p1'
-PARTITION_ROOTFS='/dev/sdd2'
+#PARTITION_ROOTFS='/dev/sdd2'
-PARTITION_BOOT='/dev/sdd1'
+#PARTITION_BOOT='/dev/sdd1'
+
 # If you use the img
 ##### Debian
-IMAGE='2013-02-09-wheezy-raspbian.img'
+#IMAGE='2013-02-09-wheezy-raspbian.img'
 OFFSET_ROOTFS=$((122880 * 512))
 OFFSET_BOOT=$((8192 * 512))
 ##### Arch
@@ -51,6 +57,7 @@ clean(){
 
 trap clean EXIT TERM INT
 
+# enforce the CPU in order to have the armv6 instructions set (and compile working packages...)
 export QEMU_CPU=arm1176
 #export QEMU_STRACE=1
 

update_builder.sh

@@ -1,17 +1,12 @@
 #!/bin/bash
 
-# get sources of latest libpoppler from experimental in the debian packages
+apt-get -b source -t experimental poppler
-# Unpack the sources
-# unpack the the debian patches in the dir of the sources
-# let the dsc file outside of this directory
-# Build package
-# Take a nap
 
-cd /root/pdf2htmlEX
+# Note: libpoppler-private-dev is not listed in the dependencies of pdf2htmlEX
+# but still needed because of poppler-config.h
+dpkg -i libpoppler-dev* libpoppler28* libpoppler-private-dev*
+
+cd pdf2htmlEX/
 git pull
-dpkg-buildpackage -rfakeroot -uc -b
-ls ../*deb
-ls /var/cache/apt/archives/libpoppler*
-
-# Copy libpoppler and pdf2htmlex deb out of the chroot.
 
+dpkg-buildpackage -uc -b