diff --git a/fs_filecheck/etc/rc.local b/fs_filecheck/etc/rc.local
index 1ff88b8..fcfb6ca 100755
--- a/fs_filecheck/etc/rc.local
+++ b/fs_filecheck/etc/rc.local
@@ -19,25 +19,19 @@ clean(){
     /sbin/shutdown -P -h now
 }
 
+trap clean EXIT TERM INT
+
 echo "GROOMER: end of boot, running rc.local."
 
-# Print the IP address
-_IP=$(hostname -I) || true
-if [ "$_IP" ]; then
-  printf "My IP address is %s\n" "$_IP"
-fi
-
-if [ -e /dev/sda ]; then
-  if [ -e /dev/sdb ]; then
+# if [ -e /dev/sda ]; then
+# if [ -e /dev/sdb ]; then
     # avoid possible misuse
-    /sbin/ifconfig eth0 down
-    trap clean EXIT TERM INT
-    cd /opt/groomer
-    /usr/sbin/led &
-    ./init.sh
-  fi
-fi
+#fdisk -l
+echo "Testing, did anything happen." >> /var/tmp/thing.txt
 
-sleep 60
+cd /opt/groomer
+./init.sh | tee "/var/tmp/groomer_log.txt"
+
+sleep 20
 
 exit 0
diff --git a/fs_filecheck/opt/groomer/constraint.sh b/fs_filecheck/opt/groomer/constraint.sh
index da7a4fe..d3275d9 100644
--- a/fs_filecheck/opt/groomer/constraint.sh
+++ b/fs_filecheck/opt/groomer/constraint.sh
@@ -1,5 +1,6 @@
 DEV_SRC='/dev/sda'
-DEV_DST='sdb1'
+DEV_SRCONE='dev/sda1'
+DEV_DST='/dev/sdb1'
 
 # User allowed to do the following commands without password
 USERNAME='kitten'
@@ -17,7 +18,6 @@ GROOM_LOG="/var/tmp/groomer_log.txt"
 
 # commands
 SYNC='/bin/sync'
-TIMIDITY='/usr/bin/timidity'
 MOUNT='/bin/mount'
 PMOUNT='/usr/bin/pmount -A -s'
 PUMOUNT='/usr/bin/pumount'
diff --git a/fs_filecheck/opt/groomer/groomer.sh b/fs_filecheck/opt/groomer/groomer.sh
index 958305c..72dcd38 100755
--- a/fs_filecheck/opt/groomer/groomer.sh
+++ b/fs_filecheck/opt/groomer/groomer.sh
@@ -13,12 +13,14 @@ clean(){
     echo "GROOMER: Cleaning up after groomer.sh."
     ${SYNC}
 
+    cp "${GROOM_LOG} ${SRC}/groomer_log.txt"
+    cp "${GROOM_LOG} ${DST}/groomer_log.txt"
+
     # Cleanup source
-    cp ${GROOM_LOG} ${SRC}/groomer_log.txt
     pumount ${SRC}
 
     # Cleanup destination
-    cp ${GROOM_LOG} ${LOGS}/groomer_log.txt
+
     rm -rf ${TEMP}
     rm -rf ${ZIPTEMP}
     pumount ${DST}
@@ -31,19 +33,17 @@ trap clean EXIT TERM INT
 # De we have a source device
 if [ ! -b ${DEV_SRC} ]; then
     echo "GROOMER: Source device (${DEV_SRC}) does not exist."
-    exit
 fi
+
 # Find the partition names on the source device
 DEV_PARTITIONS=`ls "${DEV_SRC}"* | grep "${DEV_SRC}[1-9][0-6]*" || true`
 if [ -z "${DEV_PARTITIONS}" ]; then
     echo "GROOMER: ${DEV_SRC} does not have any partitions."
-    exit
 fi
 
 # Do we have a destination device
-if [ ! -b "/dev/${DEV_DST}" ]; then
+if [ ! -b "${DEV_DST}" ]; then
     echo "GROOMER: Destination device (/dev/${DEV_DST}) does not exist."
-    exit
 fi
 
 # mount and prepare destination device
@@ -53,21 +53,23 @@ fi
 # uid= only works on a vfat FS. What should wedo if we get an ext* FS ?
 ${PMOUNT} -w ${DEV_DST} ${DST}
 if [ ${?} -ne 0 ]; then
-    echo "GROOMER: Unable to mount /dev/${DEV_DST} on /media/${DST}"
+    echo "GROOMER: Unable to mount /dev/${DEV_DST} on ${DST}"
     exit
 else
-    echo "GROOMER: Target USB device (/dev/${DEV_DST}) mounted at /media/${DST}"
-    rm -rf "/media/${DST}/FROM_PARTITION_"*
+    echo "GROOMER: Target USB device (/dev/${DEV_DST}) mounted at ${DST}"
+    
+    # rm -rf "/media/${DST}/FROM_PARTITION_"*
 
     # prepare temp dirs and make sure it's empty
-    mkdir -p "${TEMP}"
-    mkdir -p "${ZIPTEMP}"
-    mkdir -p "${LOGS}"
+    # mkdir -p "${TEMP}"
+    # mkdir -p "${ZIPTEMP}"
+    # mkdir -p "${LOGS}"
 
-    rm -rf "${TEMP}/"*
-    rm -rf "${ZIPTEMP}/"*
-    rm -rf "${LOGS}/"*
+    # rm -rf "${TEMP}/"*
+    # rm -rf "${ZIPTEMP}/"*
+    # rm -rf "${LOGS}/"*
 fi
+${PMOUNT} -w ${DEV_SRCONE} ${SRC}
 
 sleep 30
 
@@ -76,41 +78,41 @@ sleep 30
 # Find the FS types
 # lsblk -n -o name,fstype,mountpoint,label,uuid -r
 
-PARTCOUNT=1
-for partition in ${DEV_PARTITIONS}
-do
-    # Processing a partition
-    echo "GROOMER: Processing partition ${partition}"
-    if [ `${MOUNT} | grep -c ${SRC}` -ne 0 ]; then
-        ${PUMOUNT} ${SRC}
-    fi
+# PARTCOUNT=1
+# for partition in ${DEV_PARTITIONS}
+# do
+#     # Processing a partition
+#     echo "GROOMER: Processing partition ${partition}"
+#     if [ `${MOUNT} | grep -c ${SRC}` -ne 0 ]; then
+#         ${PUMOUNT} ${SRC}
+#     fi
 
-    ${PMOUNT} -w ${partition} ${SRC}
-    ls "/media/${SRC}" | grep -i autorun.inf | xargs -I {} mv "/media/${SRC}"/{} "/media/${SRC}"/DANGEROUS_{}_DANGEROUS || true
-    ${PUMOUNT} ${SRC}
-    ${PMOUNT} -r ${partition} ${SRC}
-    if [ ${?} -ne 0 ]; then
-        echo "GROOMER: Unable to mount ${partition} on /media/${SRC}"
-    else
-        echo "GROOMER: ${partition} mounted at /media/${SRC}"
+#     ${PMOUNT} -w ${partition} ${SRC}
+#     ls "/media/${SRC}" | grep -i autorun.inf | xargs -I {} mv "/media/${SRC}"/{} "/media/${SRC}"/DANGEROUS_{}_DANGEROUS || true
+#     ${PUMOUNT} ${SRC}
+#     ${PMOUNT} -r ${partition} ${SRC}
+#     if [ ${?} -ne 0 ]; then
+#         echo "GROOMER: Unable to mount ${partition} on /media/${SRC}"
+#     else
+#         echo "GROOMER: ${partition} mounted at /media/${SRC}"
 
-        # Print the filenames on the current partition in a logfile
-        find "/media/${SRC}" -fls "${LOGS}/Content_partition_${PARTCOUNT}.txt"
+#         # Print the filenames on the current partition in a logfile
+#         find "/media/${SRC}" -fls "${LOGS}/Content_partition_${PARTCOUNT}.txt"
 
-        # create a directory on ${DST} named PARTION_$PARTCOUNT
-        target_dir="/media/${DST}/FROM_PARTITION_${PARTCOUNT}"
-        echo "GROOMER: Copying to ${target_dir}"
-        mkdir -p "${target_dir}"
-        LOGFILE="${LOGS}/processing.txt"
+#         # create a directory on ${DST} named PARTION_$PARTCOUNT
+#         target_dir="/media/${DST}/FROM_PARTITION_${PARTCOUNT}"
+#         echo "GROOMER: Copying to ${target_dir}"
+#         mkdir -p "${target_dir}"
+#         LOGFILE="${LOGS}/processing.txt"
 
-        echo "GROOMER: ==== Starting processing of /media/${SRC} to ${target_dir}. ====" >> ${LOGFILE}
-        filecheck.py --source /media/${SRC} --destination ${target_dir} || true
-        echo "GROOMER: ==== Done with /media/${SRC} to ${target_dir}. ====" >> ${LOGFILE}
+#         echo "GROOMER: ==== Starting processing of /media/${SRC} to ${target_dir}. ====" >> ${LOGFILE}
+#         filecheck.py --source /media/${SRC} --destination ${target_dir} || true
+#         echo "GROOMER: ==== Done with /media/${SRC} to ${target_dir}. ====" >> ${LOGFILE}
 
-        ls -lR "${target_dir}"
-    fi
-    let PARTCOUNT=`expr $PARTCOUNT + 1`
-done
+#         ls -lR "${target_dir}"
+#     fi
+#     let PARTCOUNT=`expr $PARTCOUNT + 1`
+# done
 
 # The cleanup is automatically done in the function clean called when
 # the program quits
diff --git a/fs_filecheck/opt/groomer/init.sh b/fs_filecheck/opt/groomer/init.sh
index 30351b1..10bfbaa 100755
--- a/fs_filecheck/opt/groomer/init.sh
+++ b/fs_filecheck/opt/groomer/init.sh
@@ -13,14 +13,8 @@ fi
 clean(){
     echo "GROOMER: cleaning up after init.sh."
     ${SYNC}
-    kill -9 $(cat /tmp/music.pid)
-    rm -f /tmp/music.pid
 }
 
 trap clean EXIT TERM INT
 
-./music.sh &
-echo $! > /tmp/music.pid
-echo "GROOMER: music started."
-
-su ${USERNAME} -c ./groomer.sh | tee ${GROOM_LOG}
+su ${USERNAME} -c ./groomer.sh
diff --git a/shell_utils/copy_groomer_to_image.sh b/shell_utils/copy_groomer_to_image.sh
index bb06370..213df32 100755
--- a/shell_utils/copy_groomer_to_image.sh
+++ b/shell_utils/copy_groomer_to_image.sh
@@ -3,7 +3,7 @@
 set -e
 set -x
 
-mount /dev/sdb2 /mnt/rpi
+# mount /dev/sdb2 /mnt/rpi
 
 cp /media/sf_ubuntu-shared/Circlean-Ubuntu/fs_filecheck/opt/groomer/init.sh /mnt/rpi/opt/groomer/init.sh
 cp /media/sf_ubuntu-shared/Circlean-Ubuntu/fs_filecheck/opt/groomer/groomer.sh /mnt/rpi/opt/groomer/groomer.sh