diff --git a/MountNOOBS.md b/MountNOOBS.md
new file mode 100644
index 0000000..3d59d13
--- /dev/null
+++ b/MountNOOBS.md
@@ -0,0 +1,47 @@
+How to mount a SD card created by NOOBS on Ubuntu 15.04
+=======================================================
+
+Related to [this bug](https://github.com/raspberrypi/noobs/issues/262)
+
+TL;DR
+=====
+
+```
+    [122615.777412] usb-storage 4-1.2:1.0: USB Mass Storage device detected
+    [122615.778614] scsi host26: usb-storage 4-1.2:1.0
+    [122616.778643] scsi 26:0:0:0: Direct-Access     SD/MMC   Card  Reader     1.00 PQ: 0 ANSI: 0
+    [122616.779319] sd 26:0:0:0: Attached scsi generic sg1 type 0
+    [122617.072900] sd 26:0:0:0: [sdc] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB)
+    [122617.075210] sd 26:0:0:0: [sdc] Write Protect is off
+    [122617.075221] sd 26:0:0:0: [sdc] Mode Sense: 03 00 00 00
+    [122617.077407] sd 26:0:0:0: [sdc] No Caching mode page found
+    [122617.077424] sd 26:0:0:0: [sdc] Assuming drive cache: write through
+    [122617.090405]  *sdc: [CUMANA/ADFS] sdc1 [ADFS] sdc1*
+    [122617.101930] sd 26:0:0:0: [sdc] Attached SCSI removable disk
+```
+
+
+```
+    $ fdisk -l  /dev/sdb
+
+    Disk /dev/sdb: 14.5 GiB, 15560867840 bytes, 30392320 sectors
+    Units: sectors of 1 * 512 = *512* bytes
+    Sector size (logical/physical): 512 bytes / 512 bytes
+    I/O size (minimum/optimal): 512 bytes / 512 bytes
+    Disklabel type: dos
+    Disk identifier: 0x000aa00f
+
+    Device     Boot    Start      End  Sectors   Size Id Type
+    /dev/sdb1           *8192*  1679687  1671496 816.2M  e W95 FAT16 (LBA)
+    /dev/sdb2        1687552 30326783 28639232  13.7G 85 Linux extended
+    /dev/sdb3       30326784 30392319    65536    32M 83 Linux
+    /dev/sdb5        1695744  2744319  1048576   512M 83 Linux
+    /dev/sdb6        2752512  2875391   122880    60M  c W95 FAT32 (LBA)
+    /dev/sdb7        2883584 30326783 27443200  13.1G 83 Linux
+
+    Partition table entries are not in disk order.
+```
+
+```
+    mount -oloop,offset=$((512*8192)) /dev/sdb1 /mnt/sd/
+```
diff --git a/NOTES-RPI2 b/NOTES-RPI2
new file mode 100644
index 0000000..ce89e39
--- /dev/null
+++ b/NOTES-RPI2
@@ -0,0 +1,12 @@
+USB Ports
+---------
+
+If you connect multiple keys to the Rpi, they will be listed listed that way:
+
+First: Top left
+Second: Top right
+Third: Bottom left
+Forth: Bottom right
+
+tl;rd: as long as the source key (sda) is connected to the top left port, the destination (sdb) can be connected on any other port.
+