mirror of https://github.com/CIRCL/Circlean
82 lines
2.2 KiB
C
Executable File
82 lines
2.2 KiB
C
Executable File
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <stdint.h>
|
|
#include <sys/types.h>
|
|
#include <sys/stat.h>
|
|
#include <fcntl.h>
|
|
#include <sys/mman.h>
|
|
#include <unistd.h>
|
|
|
|
/* GPIO registers address */
|
|
#define BCM2708_PERI_BASE 0x20000000
|
|
#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO controller */
|
|
#define BLOCK_SIZE (256)
|
|
|
|
/* GPIO setup macros. Always use GPIO_IN(x) before using GPIO_OUT(x) or GPIO_ALT(x,y) */
|
|
#define GPIO_IN(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
|
|
#define GPIO_OUT(g) *(gpio+((g)/10)) |= (1<<(((g)%10)*3))
|
|
#define GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
|
|
|
|
#define GPIO_SET(g) *(gpio+7) = 1<<(g) /* sets bit which are 1, ignores bit which are 0 */
|
|
#define GPIO_CLR(g) *(gpio+10) = 1<<(g) /* clears bit which are 1, ignores bit which are 0 */
|
|
#define GPIO_LEV(g) (*(gpio+13) >> (g)) & 0x00000001
|
|
|
|
|
|
|
|
#define GPIO_4 4
|
|
|
|
int mem_fd;
|
|
void *gpio_map;
|
|
volatile uint32_t *gpio;
|
|
|
|
int main(int argc, char* argv[])
|
|
{
|
|
int ret;
|
|
int i;
|
|
/* open /dev/mem */
|
|
mem_fd = open("/dev/mem", O_RDWR|O_SYNC);
|
|
if (mem_fd == -1) {
|
|
perror("Cannot open /dev/mem");
|
|
exit(1);
|
|
}
|
|
|
|
/* mmap GPIO */
|
|
gpio_map = mmap(NULL, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, mem_fd, GPIO_BASE);
|
|
if (gpio_map == MAP_FAILED) {
|
|
perror("mmap() failed");
|
|
exit(1);
|
|
}
|
|
/* Always use volatile pointer! */
|
|
gpio = (volatile uint32_t *)gpio_map;
|
|
|
|
|
|
GPIO_IN(GPIO_4); /* must use GPIO_IN before we can use GPIO_OUT */
|
|
GPIO_OUT(GPIO_4);
|
|
|
|
//Turn on led
|
|
while (1) {
|
|
printf("Enable LED\n");
|
|
GPIO_SET(GPIO_4);
|
|
usleep(1000000);
|
|
printf("Disable GPIO\n"); // Does not seem to work?
|
|
GPIO_CLR(GPIO_4);
|
|
usleep(1000000);
|
|
}
|
|
/* Free up ressources */
|
|
/* munmap GPIO */
|
|
ret = munmap(gpio_map, BLOCK_SIZE);
|
|
if (ret == -1) {
|
|
perror("munmap() failed");
|
|
exit(1);
|
|
}
|
|
/* close /dev/mem */
|
|
ret = close(mem_fd);
|
|
if (ret == -1) {
|
|
perror("Cannot close /dev/mem");
|
|
exit(1);
|
|
}
|
|
|
|
return EXIT_SUCCESS;
|
|
}
|