You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

50 lines
1.3 KiB

# d4-goclient
A D4 project client (sensor) implementing the [D4 encapsulation protocol](https://github.com/D4-project/architecture/tree/master/format).
The client can be used on different targets and architectures to collect network capture, logs, specific network monitoring and send it
back to a [D4 server](https://github.com/D4-project/d4-core).
For more information about the [D4 project](https://www.d4-project.org/).
3 years ago
# Installation
3 years ago
Fetch d4-goclient code and dependencies
3 years ago
```bash
go get github.com/satori/go.uuid
go get github.com/D4-project/d4-goclient
3 years ago
```
Use make to build binaries:
3 years ago
```bash
make arm5l # for raspberry pi / linux
make amd64l # for amd64 / linux
3 years ago
```
## Dependencies
- golang 1.10 (tested)
- go.uuid
3 years ago
# Use
## Launch a d4-server (if you don't have a server)
3 years ago
See https://github.com/D4-project/d4-core/tree/master/server
$IP_SRV being the d4-server's address, $PORT its listening port
3 years ago
## Pipe data into the client
3 years ago
### Some file
3 years ago
```bash
cat /proc/cpuinfo | ./d4-goclient -c conf.sample/ | socat - OPENSSL-CONNECT:$IP_SRV:$PORT,verify=0
```
### tcpdump (libpcap) output, discarding our own traffic
$IP being the monitoring computer ip
```bash
tcpdump not dst $IP and not src $IP -w - | ./d4-goclient -c conf.sample/ | socat - OPENSSL-CONNECT:$IP_SRV:$PORT,verify=0
3 years ago
```