The following page hosts some frequently asked questions as noticed in our [issues](https://github.com/MISP/issues) and [gitter](https://gitter.im/MISP/Support) channels.
If you have feature requests or you found a bug you can open a ticket on [MISP's GitHub repository issue](https://github.com/MISP/MISP/issues) tracker.
From a hardware perspective, MISP's requirements are quite humble, a web server with 2+ cores and 8-16 GB of memory should be plenty, though more is always better of course. A lot of it depends on the data set and the number of users you are dealing with.
We recommend a standard LAMP stack on top of Ubuntu >18.04 LTS. For details on the exact dependencies please refer to the [installation guide](https://misp.github.io/MISP/INSTALL.ubuntu1804/) as well as the [requirements for the MISP modules](https://github.com/MISP/misp-modules/blob/master/REQUIREMENTS).
During a [Hackathon](https://hackathon.hack.lu) a small tool called [MISP-Sizer](https://misp-project.org/MISP-sizer/) was conceived. It will give you a **very rough** idea on what requirements are if you have a bigger installation. [source-code is here](https://github.com/MISP/MISP-sizer)
- Using [Cacti](https://www.cacti.net/), a blog post with the [instruction](https://www.misp-project.org/2020/08/22/MISP-Monitoring-with-Cacti.html) is available.
- Using [Munin](http://munin-monitoring.org/), [misp-monitor](https://github.com/SteveClement/misp-monitor) for instructions.
- Using [Nagios](https://www.nagios.org/), [Monitoring MISP with Nagios](https://blog.rootshell.be/2020/08/25/monitoring-misp-with-nagios/)
- Using [OpenNMS](https://www.opennms.com/), a blog post with the [instructions](https://www.misp-project.org/2020/08/18/MISP-Monitoring-with-OpenNMS.html) is availabe.
- [Live monitoring of MISP usage](https://github.com/MISP/misp-monitoring) via the httpd logs.
The setting 'MISP.extended_alert_subject' allows you to have an extended subject. /!\ Beware if you’re using encryption: the subject will not be encrypted. Be aware that you might leak some sensitive information this way. Below is an example how the two subject types look like. First with the option disabled, then with the option enabled.
(Source: [Getting started with MISP](http://www.vanimpe.eu/2015/05/31/getting-started-misp-malware-information-sharing-platform-threat-sharing-part-3/))
By default, MISP runs on a local instance and is setup for local access upon installation. This allows you to setup security and customizations before making it available elsewhere. If you would like to access the MISP instance from a remote host (including another VM host/client), assign an IP to the MISP host and point your browser accordingly. Please refer to [how to set the baseurl from command line](#how-do-i-set-the-baseurl-from-the-command-line). Once the update is done, you should then be able to access the instance using the set IP/DNS name.
MISP allows you to define the group of people with whom you want to share your threat data. If you do not set it to your preferred default then it’s likely that at one given moment you’ll make an error and share your intel with the wrong group. Defining the sharing level is done with the setting default_event_distribution in the configuration file. There are three levels:
You can set a similar configuration setting for the attributes. The setting default_attribute_distribution has the same values as default_event_distribution. Additionally it has the value event which allows the attribute to get the setting from the event to which it belongs.
Set your organisation logo by adding an image (.png) that has the same name as your organisation in the directory */var/www/MISP/app/webroot/img/orgs/*.
Yet another way of doing this is by logging into your MISP instance with Admin rights, navigate to *Administration* -> *Server Settings*, tab -> *Manage files*.
You can add a footer logo. Add an image to the directory */var/www/MISP/app/webroot/img/custom/* and define the footer logo in the config file (config.php) or in *Adminitration* -> *Server Settings...* -> *MISP settings* (search for: "footer_logo") point to the location on-disk of the image.
Partial source: [Getting started with MISP](http://www.vanimpe.eu/2015/05/31/getting-started-misp-malware-information-sharing-platform-threat-sharing-part-3/)
This can happen if the [FQDN](https://en.wikipedia.org/wiki/Fully_qualified_domain_name) of the server hosting the instance has changed. A way to fix this is to flush temporary data stored in redis. This can be done by logging in redis, for example when logging in with redis-cli, and issuing a _*flushall*_ command.
You can use a generic script called IOC parser (https://github.com/armbues/ioc_parser) or use a script published by Palo Alto to convert IOC parser output to a MISP event (https://github.com/PaloAltoNetworks-BD/report_to_misp/). You have also the option to select all the text and paste it in the free-text import form.
Another option is the new [OCR import module](https://github.com/MISP/misp-modules) that can be used via the import modules. You will need to install the OCR software tesseract.
/!\ This applies to an earlier version of MISP, do not randomly try this fix on valuable data. By all means try it on a test-machine and report back if your problem was solved by this.
This is most likely due to the fact that MISP did not clean up expired sessions prior to version 2.4.51 automatically and relied on a site-admin occasionally cleaning it up using the button found on the diagnostics page. Once you upgrade to 2.4.51, MISP will try to cull the table with each page load by a site-admin, which in some cases if the table has grown to extreme sizes it will get stuck on. To resolve the issue, log into mysql:
### Upgrading from MISP 2.4.65 to MISP 2.4.66 - Unable to merge due to the Composer file.
In MISP 2.4.66, Composer is included by default to avoid the risk of downloading a rogue PHP Composer version (if the composer repository is compromised or MiTM are performed) via the download and php execution. But when upgrading (via a git pull), the git merge process might complain about the composer phar file still being there. You can safely remove that file and `git pull origin 2.4` again.
A TAXII 1 implementation can be found at https://github.com/MISP/MISP-Taxii-Server .
This is mostly a TAXII server hooked up to MISP, meant to receive STIX files to its in box and uploading them to MISP.
There is also an experimental feature to push MISP events to the TAXII server when they're published - that's in `scripts/push_published_to_taxii.py`. It seems to work, but may occasionally re-upload duplicate events to MISP.
If you need to start from scratch with your MISP database and remove all data you can use the [`misp-wipe`](https://github.com/MISP/MISP/tree/2.4/tools/misp-wipe) script provided in the `tools/` folder.
6. On the next screen tick: "Trust this certificate for identifying websites"
7. Done, enjoy the new gained quality of life
Note: Chrome might expect a [Subject Alternative Name](https://en.wikipedia.org/wiki/Subject_Alternative_Name) make sure you created your certificate with '-extension san'.
To allow insecure localhost connections enable this option: chrome://flags/#allow-insecure-localhost
Sources: [CLI](https://askubuntu.com/questions/645818/how-to-install-certificates-for-command-line) and [Chrome](https://origin-symwisedownload.symantec.com/resources/webguides/sslv/sslva_first_steps/Content/Topics/Configure/ssl_chrome_cert.htm)/[Chrome insecure localhost](https://stackoverflow.com/questions/7580508/getting-chrome-to-accept-self-signed-localhost-certificate)
[For the Firefox Browser](https://superuser.com/questions/1054724/how-to-make-firefox-ignore-all-ssl-certification-errors)
MISP uses [bootstrap.css](https://getbootstrap.com) the specific CSS file can be found on a typical MISP install at `/var/www/MISP/app/webroot/css/bootstrap.css`.
You can customize this for your own needs. There are also pre-made boostrap themes which you can use as-is or build upon.
Before making any changes, confirm the version of boostrap currenlty used by running `head -5 /var/www/MISP/app/webroot/css/bootstrap.css`. You can find themes on sites like [Bootswatch](https://bootswatch.com/2/).
To replace the current theme with a theme you found on bootsplash, run: `wget https://bootswatch.com/2/readable/bootstrap.css -O /var/www/MISP/app/webroot/css/bootstrap.css` , replacing the URL as needed.
### How can I deal with a MISP instance that has pulled in feeds over and over into new events, generating hundreds of GBs of junk correlations, rendering the instance unusable?
*Step 1:* ensure that all your CSV/freetext source_format feeds are using the fixed event setting. If you want to make sure this is the case, you can run this SQL query instead of doing it manually:
*Step 3:* purge all of your feed data that have been pulled into multiple events. The easiest way of doing this: check which feeds are enabled (ignore misp source format feeds, they are not causing issues) and note down the IDs. Afterwards, use the CLI cleanup tool to remove all the feed events:
If you have any permission issues, please [set the permissions](https://misp.github.io/MISP/INSTALL.ubuntu1804/#5-set-the-permissions) to something sane first.
There are a plethora of issues that might arise when using SELinux when it comes to permissions.
First, please familiarize yourself with [the basics](https://opensource.com/article/18/7/sysadmin-guide-selinux) of SELinux.
RedHat has a comprehensive [SELINUX USER'S AND ADMINISTRATOR'S GUIDE](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html-single/selinux_users_and_administrators_guide/index).
More often than not there might be issues with SELinux when not configured correctly. The below will give you pointers where to look and how to figure out what is wrong.
You can investigate SELinux issues without any tools by opening the audit log it generates. This log is found at /var/log/audit/audit.log. However, unless you know exactly what to look for and have a lot of free time, you’re going to find it difficult making sense of the log.
Install some handy tools:
```bash
# Note: This will pull in some X tools, you have been warned
sudo yum install setroubleshoot setools
```
We now have a tool called sealert that analyzes the audit log used by SELinux. Sealert will scan the log file and will then generate a report containing all discovered SELinux issues.
In this overview of what went wrong you will see suggestions on how to fix them after the issue detected.
To run sealert from the command-line, we need to point it to the SELinux audit log.
It is not recommended to clear the audit logs as they might contain information needed in the future for troubleshooting or security investigations. However, if that is not the case, just empty the audit log:
You can update MISP as ofte as you like. If you see the follwing:
This means that the main repository has an update available.
If you want to play it safer or want to integrate it in your Weekly/Bi-Monthly update routine you can track our [Changelog](https://www.misp-project.org/Changelog.txt) a more up to date version is available [here](https://misp.github.io/MISP/Changelog/)
In theory all should "just work"(tm), but in practice the following dependencies might make your install unstable and need a little though before just doing the updates.
* php/pear
* python
* apache
* init scheme/scripts
* mariadb/mysql
* redis
* git
### PHP
This is probably the most likely one that might get you into trouble.
The following happened on a Debian Testing lately. During the upgrade php got upgraded to php-7.3 and seemingly some php-7.2 dependencies were deinstalled and the system now had 2 concurrent versions of php installed.
The fix was to remove any *libapache2-mod-php7.2* packages and make sure that *apt remove libapache2-mod-php7.3* was installed. Most certainly you need to add symbolic links to */etc/apache2/mods-enabled* to make php7.3 work.
Then double check if all the php dependencies are install, refer to the install documents.
The same for pear, where we mostly use 2 (bundled) packages: Console Command Line, Crypt GPG.
If you upgrade from a very old and out of date version of MISP this might raise issues.
php.ini might also become problematic if you just erase the recommended defaults.
### Python3
If you use python2 for MISP, please read the install docs about MISP being Python 3 only.
Currently Python3.6 is minimum. It is known working on 3.7 with some minor difficulties (see PyMISP issues).
The biggest issue is certainly with PyMISP doig unexpected things when python might be updated.
Using a virtualenv, whilst not always ideal for all setups, will at least make sure that problems are contained a little more.
### Apache
Mostly config issues might be a show stopper. And major version updates where some underlying config might need to be changed.
### init/systemd
MISP launches a couple of things on boot. Changing what handles boot behavious might have an impact.
### MariaDB/MySQL/redis
Similar to apache, most importantly always take good care that the DB engine is not all of a sudden changed without you noticing it.
From minor to major updates, rarely things might need to be adapted.
### git
Currently (as of v2.4.108) the git-cli command is used in MISP core. In very rare cases where the expected output changes, this might be an issue.
This wants to be done on the CLI if you experience issues:
```bash
$PATH_TO_MISP/app/Console/cake "MISP.live" 0
```
Other related MISP Settings
Optional MISP.maintenance_message Great things are happening! MISP is undergoing maintenance, but will return shortly. You can contact the administration at $email or call CIRCL. The message that users will see if the instance is not live.
If you cannot write the **.git** files and directory as the user running the web server (and thus PHP), the update will fail.
The following diagnostic check will let you know if you can update or not.
In case you get a file not found on **.git/ORIG_HEAD**, this means that you have never updated your MISP OR you have installed git from an archive file (like .zip/.tar.gz or similar)
Try to click update MISP and see what happens.
### What can go wrong if I update MISP?
In theory nothing. We put great effort into protecting the integrity of the data stored in your MISP instance.
DB upgrades happen upon login or on reload once you have update the repository.
You cannot "break" anything by clicking **Update MISP** worse case it will complain about something and you will certainly find the answer on this page.
IF not, please open an [issue](https://github.com/MISP/MISP/issues) on GitHub or come to our [gitter](https://gitter.im/MISP/MISP) chat to see if the community can help.
If you get have a **Connection refused state** on your modules one of the following might be true.
- You have no [misp-modules](https://github.com/MISP/misp-modules) not installed
- They are instaled but not running
- Something completly different
If they are not installed, check out this section of the [INSTALL guide](https://github.com/MISP/misp-modules/#how-to-install-and-start-misp-modules-in-a-python-virtualenv) of [misp-modules](https://github.com/MISP/misp-modules).
In case they are not running, try this on the console:
> [warning] Running misp-modules like this will certainly kill it once you quit the session. Make sure it is in your **/etc/rc.local** or some ther init script that gets run on boot.
## Updating PyMISP to incorporate newer versions of the MISP object templates
In some cases, for instance if a newer version of a MISP object is present on the server but not yet on PyMISP, you want to reflect the current state in your PyMISP installation.
In order to do so, perform the following steps. It fetches the latest object templates and installs PyMISP again:
## Why do I see 'The request has been black-holed' when I submit forms?
That's a security measure for form tampering protection.
All forms have a timeout (~15min) and all of them can only be submitted once. If you use your browser's "back" button and resubmit the form MISP will consider it as a potential attempt at form tampering.
## What to do if my REST client is throwing SSL errors when trying to query my MISP instance?
The REST client will use the framework's certificate store to validate the contacted host. If your root CA / self-signed certificate is not known by the certificate store, the request will fail. You can skip the SSL validation altogether using the "Skip SSL validation" checkbox.
## What to do if my REST client cannot reach the host, despite me being able to issue requests using Curl / Postman / etc.?
The REST client issues instructions to your MISP server to contact a remote host (most commonly itself). Always consider how your MISP server can address itself when using the REST client, by default it will prepend the requested relative path in the URL field with the instance's baseurl.
If your MISP cannot reach itself via the baseurl the request will fail. You can use the "Use full path - disclose my API key" checkbox along with the full URL in the URL field to instruct MISP to use another path than what it would construct using the baseurl.
## How would one set up a sharing group with a remote org, where we only share a mutual community instance (i.e. we both have sync users on that instance). On our local instance, they exist as a remote org (from events that have synced from their instance via our shared community instance).
It is not possible to do that. Keep in mind that if you are both on a mutual community instance, someone is in charge of that instance that will have database and admin level access. They would be able to inspect the data you exchange on their community instance with one another, so MISP will block any attempt to share with them.
If you really want to go through the community instance to exchange with them, you explicitly have to include the host organisation of the community instance (they would get access if they wanted to anyway, this way we can ensure that you are clear about that):
- You are org a on instance A.
- Your partner that you want to share with is org b on instance B.
- You have no way of directly reaching org b, but you both have access to instance C, which is run by org c (the sharing instance)
- In order to reach org b, you have two options for sharing groups, depending on whether you want to be able to push to them or want to rely on them pulling data from the community instance:
When a user attempts to add an object to an event and the following error is received (Level 1 debug enabled):
```SQLSTATE[42S22]: Column not found: 1054 Unknown column 'Event.org_id' in 'where clause’```
One potential resolution is to upgrade MISP to 2.4.107.
#### Symptoms
Users with the site-admin role are able to add objects to events without any error. This error was encountered when a user belonged to every role **except** site-admin.
Now check if the MISP web UI is accessible and if the diagnostics page shows any errors.
> The diagnostics page will show "PHP CLI Version (>7.2 recommended): Unknown (Issues determining version)". That's a [known issue](https://github.com/MISP/MISP/issues/2334).
A galaxy can be assigned like a tag. You can use the add tag function and copy the full conntector-tag. Example `misp-galaxy:ransomware=“Locky”`, which can be found in `/galaxy_clusters/view/`
