Automation functionality is designed to automatically generate signatures for intrusion detection systems. To enable signature generation for a given attribute, Signature field of this attribute must be set to Yes. Note that not all attribute types are applicable for signature generation, currently we only support NIDS signature generation for IP, domains, host names, user agents etc., and hash list generation for MD5/SHA1 values of file artefacts. Support for more attribute types is planned. To make this functionality available for automated tools an authentication key is used. This makes it easier for your tools to access the data without further form-based-authentication. The API key can be found and managed under My Profile page (`/users/view/me`) on a MISP instance.
The authentication of the automation is performed via a secure key available in the MISP UI interface. Make sure you keep that key secret as it gives access to the entire database! The API key is available in the event actions menu under automation.
Since version 2.2 the usage of the authentication key in the URL is deprecated. Instead, pass the auth key in an Authorization header in the request. The legacy option of having the auth key in the URL is temporarily still supported but not recommended.
When performing your request, depending on the type of request, you might need to explicitly specify in what content type you want to get your results. This is done by setting one of the below Accept headers:
~~~~
Accept: application/json
Accept: application/xml
~~~~
When submitting data in a POST, PUT or DELETE operation you also need to specify in what content-type you encoded the payload. This is done by setting one of the below Content-Type headers:
It is possible to search in the database for a list of attributes or events based on a list of criterias.
To return attributes or events in a desired format, use the following URL and header settings:
URL:
~~~~
YOUR_MISP_URL/attributes/restSearch
YOUR_MISP_URL/events/restSearch
~~~~
Headers:
~~~~
Accept: application/json
Content-type: application/json
Authorization: YOUR_API_KEY
~~~~
The next feature to take care of then is the body of the query. This is where you are going to put your filters.
As an example, if we want to export all the IP addresses that have a TLP marking and not marked as TLP:red, you can find below the corresponding filters to use:
~~~~json
{
"returnFormat": "json",
"type": {
"OR": [
"ip-src",
"ip-dst"
]
},
"tags": {
"NOT": [
"tlp:red"
],
"OR": [
"tlp:%"
]
}
}
~~~~
Find below a non exhaustive list of parameters that can be used to filter data in your search (some parameters specific to given export formats are not mentioned):
- **returnFormat**: Set the return format of the search (Currently supported: json, xml, openioc, suricata, snort - more formats are being moved to restSearch with the goal being that all searches happen through this API). Can be passed as the first parameter after restSearch or via the JSON payload.
- **limit**: Limit the number of results returned, depending on the scope (for example 10 attributes or 10 full events).
- **page**: If a limit is set, sets the page to be returned. page 3, limit 100 will return records 201->300).
- **value**: Search for the given value in the attributes' value field.
- **type**: The attribute type, any valid MISP attribute type is accepted.
- **category**: The attribute category, any valid MISP attribute category is accepted.
- **org**: Search by the creator organisation by supplying the organisation identifier.
- **tags**: To include a tag in the results just write its names into this parameter. To exclude a tag prepend it with a '!'.
- **quickfilter**: Enabling this (by passing "1" as the argument) will make the search ignore all of the other arguments, except for the auth key and value. MISP will return an xml / json (depending on the header sent) of all events that have a sub-string match on value in the event info, event orgc, or any of the attribute value1 / value2 fields, or in the attribute comment.
- **from**: Events with the date set to a date after the one specified in the from field (format: 2015-02-15). This filter will use the date of the event.
- **to**: Events with the date set to a date before the one specified in the to field (format: 2015-02-15). This filter will use the date of the event.
- **eventid**: The events that should be included / excluded from the search
- **withAttachments**: If set, encodes the attachments / zipped malware samples as base64 in the data field within each attribute
- **metadata**: Only the metadata (event, tags, relations) is returned, attributes and proposals are omitted.
- **uuid**: Restrict the results by uuid.
- **publish_timestamp**: Restrict the results by the timestamp of the last publishing of the event. The input can be a timetamp or a short-hand time description (7d or 24h for example). You can also pass a list with two values to set a time range (for example ["14d", "7d"]).
- **last**: (Deprecated synonym for publish_timestamp) Restrict the results by the timestamp of the last publishing of the event. The input can be a timetamp or a short-hand time description (7d or 24h for example). You can also pass a list with two values to set a time range (for example ["14d", "7d"]).
- **timestamp**: Restrict the results by the timestamp (last edit). Any event with a timestamp newer than the given timestamp will be returned. In case you are dealing with /attributes as scope, the attribute's timestamp will be used for the lookup. The input can be a timetamp or a short-hand time description (7d or 24h for example). You can also pass a list with two values to set a time range (for example ["14d", "7d"]).
- **published**: Set whether published or unpublished events should be returned. Do not set the parameter if you want both.
- **enforceWarninglist**: Remove any attributes from the result that would cause a hit on a warninglist entry.
- **to_ids**: By default (0) all attributes are returned that match the other filter parameters, irregardless of their to_ids setting. To restrict the returned data set to to_ids only attributes set this parameter to 1. You can only use the special "exclude" setting to only return attributes that have the to_ids flag disabled.
- **deleted**: If this parameter is set to 1, it will return soft-deleted attributes along with active ones. By using "only" as a parameter it will limit the returned data set to soft-deleted data only.
- **includeEventUuid**: Instead of just including the event ID, also include the event UUID in each of the attributes.
- **event_timestamp**: Only return attributes from events that have received a modification after the given timestamp. The input can be a timetamp or a short-hand time description (7d or 24h for example). You can also pass a list with two values to set a time range (for example ["14d", "7d"]).
- **sgReferenceOnly**: If this flag is set, sharing group objects will not be included, instead only the sharing group ID is set.
- **eventinfo**: Filter on the event's info field.
- **searchall**: Search for a full or a substring (delimited by % for substrings) in the event info, event tags, attribute tags, attribute values or attribute comment fields.
- **attackGalaxy**: Select the ATT&CK matrix like galaxy to use when using returnFormat = attack. Defaults to the Mitre ATT&CK library via mitre-attack-pattern.
Automatic export of all network related attributes is available under the Snort or Suricata rule format. Only published events and attributes marked as IDS Signature are exported.
You can configure your tools to automatically download the following file:
<dd>Events with the date set to a date after the one specified in the from field (format: 2015-02-15). This filter will use the date of the event.</dd>
<dd>Events published within the last x amount of time, where x can be defined in days, hours, minutes (for example 6d or 12h or 30m). This filter will use the published timestamp of the event.</dd>
The keywords false or null should be used for optional empty parameters in the URL.
An example for a Suricata export for all events excluding those tagged tag1, without all of the commented information at the start of the file would look like this:
<dd>Events with the date set to a date after the one specified in the from field (format: 2015-02-15). This filter will use the date of the event.</dd>
<dd>Events published within the last x amount of time, where x can be defined in days, hours, minutes (for example 5d or 12h or 30m). This filter will use the published timestamp of the event.</dd>
You can export MISP events in MITRE's STIX format (to read more about [STIX](https://stix.mitre.org/)). The STIX XML export is currently very slow and can lead to timeouts with larger events or collections of events. The STIX JSON return format does not suffer from this issue.
Search parameters can be passed to the function via URL parameters or by POSTing an xml or json object (depending on the return type). The following parameters can be passed to the STIX export tool: id, withAttachments, tags. Both id and tags can use the && (and) and ! (not) operators to build queries. Using the URL parameters, the syntax is as follows:
<dd>To include a tag in the results just write its names into this parameter. To exclude a tag prepend it with a '!'. You can also chain several tag commands together with the '&&' operator. Please be aware the colons (:) cannot be used in the tag search. Use semicolons instead (the search will automatically search for colons instead).</dd>
</dl>
For example, to include tag1 and tag2 but exclude tag3 you would use:
<dd>Events with the date set to a date after the one specified in the from field (format: 2015-02-15). This filter will use the date of the event.</dd>
<dd>Events published within the last x amount of time, where x can be defined in days, hours, minutes (for example 5d or 12h or 30m). This filter will use the published timestamp of the event.</dd>
XML is automatically assumed when using the STIX export:
~~~~
https://<mispurl>/events/stix/download
~~~~
The same search could be accomplished using the following POSTed XML object (note that ampersands need to be escaped, or alternatively separate id and tag elements can be used):
Attaches a tag to an object by a given UUID. Note that adding a tag collection via this endpoint is not possible. Please refer to /events/addTag and /attributes/addTag for that functionality.
This endpoint exists for convenience reasons and might be slightly less performant than /events/addTag and /attributes/addTag.
curl -X POST --header "Authorization: YOUR API KEY" --header "Accept: application/json" --header "Content-Type: application/json" https://<mispurl>/attributes/delete/12345
curl -X POST --header "Authorization: YOUR API KEY" --header "Accept: application/json" --header "Content-Type: application/json" https://<mispurl>/attributes/delete/12345/1
### GET /attributes/describeTypes Describe types API
MISP can procedurally describe all attribute types and attribute categories it currently supports including the category - type mappings. To access this information simply send a GET request to:
#### Example
~~~~
https://<mispurl>/attributes/describeTypes
~~~~
Depending on the headers passed the returned data will be a JSON object or an XML, with 3 main sections: types, categories, category\_type\_mappings.
To view the mandatory and optional fields, use a GET request on the above URL.
####Sample output
~~~~json
{
"name": "\/admin\/users\/add API description",
"description": "POST a User object in JSON format to this API to create a new user.",
"mandatory_fields": [
"email",
"org_id",
"role_id"
],
"optional_fields": [
"password",
"external_auth_required",
"external_auth_key",
"enable_password",
"nids_sid",
"server_id",
"gpgkey",
"certif_public",
"autoalert",
"contactalert",
"disabled",
"change_pw",
"termsaccepted",
"newsread"
],
"url": "\/admin\/users\/add"
}
~~~~
### POST admin/users/edit/
To edit an existing user send a POST request to:
~~~~
https://<mispurl>/admin/users/edit/[user id]
~~~~
Only the fields POSTed will be updated, the rest is left intact. To view all possible parameters, simply send a GET request to the above URL.
### POST admin/users/delete/
You can also delete users by POSTing to the below URL, but keep in mind that disabling users (by setting the disabled flag via an edit) is always prefered to keep user associations to events intact.
To delete an organisation simply send a POST or DELETE request to the above URL.
For creating or modifying an organisation, simply POST a JSON containing the relevant fields to the appropriate API. The only mandatory field is the organisation name, with a host of optional parameters
An example for a simple organisation object:
~~~
{
"name": "Blizzard",
"nationality": "US"
}
~~~
Not setting a field will assume the default settings for the given field in the case of a new organisation whilst it would retain the existing setting for existing organisations. The above example would create the following object in MISP:
~~~
{
"Organisation": {
"id": "1108",
"name": "Blizzard",
"alias": "",
"anonymise": false,
"date_created": "2017-01-22 17:32:29",
"date_modified": "2017-01-22 17:32:29",
"description": "",
"type": "",
"nationality": "US",
"sector": "",
"created_by": "1",
"uuid": "5884de9d-04f0-4d7d-bf15-0b88c0a83865",
"contacts": "",
"local": true,
"landingpage": ""
}
}
~~~
To query the add or edit APIs for the valid parameters, simply send a GET requests to either API. The result currently looks like this (which might change when new fields are added):
~~~
{
"name": "\/admin\/organisations\/add API description",
<dd>Events with the date set to a date after the one specified in the from field (format: 2015-02-15). This filter will use the date of the event.</dd>
<dt>to</dt>
<dd>Events with the date set to a date before the one specified in the to field (format: 2015-02-15). This filter will use the date of the event.</dd>
<dt>last</dt>
<dd>Events published within the last x amount of time, where x can be defined in days, hours, minutes (for example 5d or 12h or 30m). This filter will use the published timestamp of the event.</dd>
</dl>
The keywords false or null should be used for optional empty parameters in the URL. Also check out the User Guide to read about the [REST API](../using-the-system/README.md#rest-api).
### CSV export
An automatic export of attributes is available as CSV. Only attributes that are flagged "to_ids" will get exported.
You can configure your tools to automatically download the following file:
~~~~
https://<mispurl>/events/csv/download
~~~~
This will download all the valid attributes in your MISP instance (might take some time).
You can also configure your tools to download the attributes from a specific event. Here is the old legacy CSV export that will work like exporting all attributes:
~~~~
https://<mispurl>/events/csv/download/<event-id>
~~~~
You can specify additional flags for CSV exports as follows:
<dd>Setting this flag to true will include attributes that are not marked "to_ids".</dd>
<dt>tags</dt>
<dd>Simply add a list of tags that should be included or negated (by prepending the tag name with a "!"). Any event with a negated tag will be ignored, even if an included tag is matching. An example is included further down.</dd>
<dt>category</dt>
<dd>The attribute category, any valid MISP attribute category is accepted.</dd>
<dt>type</dt>
<dd>The attribute type, any valid MISP attribute type is accepted.</dd>
<dt>includeContext</dt>
<dd>Include the event data with each attribute.</dd>
<dt>from</dt>
<dd>Events with the date set to a date after the one specified in the from field (format: 2015-02-15). This filter will use the date of the event.</dd>
<dt>to</dt>
<dd>Events with the date set to a date before the one specified in the to field (format: 2015-02-15). This filter will use the date of the event.</dd>
<dt>last</dt>
<dd>Events published within the last x amount of time, where x can be defined in days, hours, minutes (for example 5d or 12h or 30m). This filter will use the published timestamp of the event.</dd>
</dl>
For example, to only download a csv generated of the "domain" type and the "Network activity" category attributes all events except for the one and further restricting it to events that are tagged "tag1" or "tag2" but not "tag3", only allowing attributes that are IDS flagged use the following syntax:
instead (the search will automatically search for colons instead).</dd>
<dt>id</dt>
<dd>The event's ID</dd>
<dt>from</dt>
<dd>Events with the date set to a date after the one specified in the from field (format: 2015-02-03)</dd>
<dt>to</dt>
<dd>Events with the date set to a date before the one specified in the to field (format: 2015-02-03)</dd>
</dl>
MISP will inject header values into the zone file as well as define the action taken for each of the values that can all be overwritten. By default these values are either the default values shipped with the application, or ones that are overwritten by your site administrator. The values are as follows:
To restrict the results by tags, use the usual syntax. Please be aware the colons (:) cannot be used in the tag search. Use semicolons instead (the search will automatically search for colons instead). To get ip-src values from events tagged tag1 but not tag2 use:
<dd>The attribute type, any valid MISP attribute type is accepted.</dd>
<dt>tags</dt>
<dd>To include a tag in the results just write its names into this parameter. To exclude a tag prepend it with a '!'. You can also chain several tag commands together with the '&&' operator. Please be aware the colons (:) cannot be used in the tag search. Use semicolons instead (the search will automatically search for colons instead).</dd>
<dd>Set the lowest "date" field value that should be included in the export (format YYYY-MM-DD)</dd>
<dt>to</dt>
<dd>Set the highest "date" field value that should be included in the export (format YYYY-MM-DD)</dd>
<dt>last</dt>
<dd>Set the timeframe of the export based on the "timestamp" value. The parameter uses a time + metric notation (valid examples: "2w", "60m", "24h")</dd>
<dd>Events with the date set to a date after the one specified in the from field (format: 2015-02-15). This filter will use the date of the event.</dd>
<dd>Events published within the last x amount of time, where x can be defined in days, hours, minutes (for example 5d or 12h or 30m). This filter will use the published timestamp of the event.</dd>
<dd>Search for the given value in the attributes' value field.</dd>
<dt>type</dt>
<dd>The attribute type, any valid MISP attribute type is accepted.</dd>
<dt>category</dt>
<dd>The attribute category, any valid MISP attribute category is accepted.</dd>
<dt>org</dt>
<dd>Search by the creator organisation by supplying the organisation idenfitier.</dd>
<dt>tags</dt>
<dd>To include a tag in the results just write its names into this parameter. To exclude a tag prepend it with a '!'. You can also chain several tag
commands together with the '&&' operator. Please be aware the colons (:) cannot be used in the tag search. Use semicolons instead (the search will automatically search for colons instead).</dd>
</dl>
For example, to include tag1 and tag2 but exclude tag3 you would use:
<dd>Enabling this (by passing "1" as the argument) will make the search ignore all of the other arguments, except for the auth key and value. MISP will return an xml / json (depending on the header sent) of all events that have a sub-string match on value in the event info, event orgc, or any of the attribute value1 / value2 fields, or in the attribute comment.</dd>
<dd>Events with the date set to a date after the one specified in the from field (format: 2015-02-15). This filter will use the date of the event.</dd>
<dd>Events published within the last x amount of time, where x can be defined in days, hours, minutes (for example 5d or 12h or 30m). This filter will use the published timestamp of the event.</dd>
<dd>Limit the number of results returned; use together with page.</dd>
<dt>page</dt>
<dd>If a limit is set, sets the page to be returned, starting at 1; page 3, limit 100 will return records 201->300). When requesting a page beyond the number of available pages, the returned results list will be empty.</dd>
The keywords false or null should be used for optional empty parameters in the URL.
For example, to find any event with the term "red october" mentioned, use the following syntax (the example is shown as a POST request instead of a GET, which is highly recommended):
To just return a list of attributes, use the following syntax:
<dl>
<dt>value</dt>
<dd>Search for the given value in the attributes' value field.</dd>
<dt>type</dt>
<dd>The attribute type, any valid MISP attribute type is accepted.</dd>
<dt>category</dt>
<dd>The attribute category, any valid MISP attribute category is accepted.</dd>
<dt>org</dt>
<dd>Search by the creator organisation by supplying the organisation identifier.</dd>
<dt>tags</dt>
<dd>To include a tag in the results just write its names into this parameter. To exclude a tag prepend it with a '!'. You can also chain several tag commands together with the '&&' operator. Please be aware the colons (:) cannot be used in the tag search. Use semicolons instead (the search will automatically search for colons instead).</dd>
<dd>Events with the date set to a date after the one specified in the from field (format: 2015-02-15). This filter will use the date of the event.</dd>
<dd>Events published within the last x amount of time, where x can be defined in days, hours, minutes (for example 5d or 12h or 30m). This filter will use the published timestamp of the event.</dd>
You can also use search for IP addresses using CIDR. Make sure that you use '|' (pipe) instead of '/' (slashes). Please be aware the colons (:) cannot be used in the tag search. Use semicolons instead (the search will automatically search for colons instead). See below for an example:
sigOnly is an optional flag that will block all attributes from being exported that don't have the IDS flag turned on. It is possible to search for several types with the '&&' operator and to exclude values with the '!' operator. For example, to get all IDS signature attributes of type md5 and sha256, but not filename|md5 and filename|sha256 from event 25, use the following:
As described in the REST section, it is possible to retrieve a list of events along with their metadata by sending a GET request to the /events API. However, this API in particular is a bit more versatile. You can pass search parameters along to search among the events on various fields and retrieve a list of matching events (along with their metadata). Use the following URL:
You can also download samples by knowing its MD5 hash. Simply pass the hash along as a JSON/XML object or in the URL (with the URL having overruling the passed objects) to receive a JSON/XML object back with the zipped sample base64 encoded along with some contextual information.
You can also use this API to get all samples from events that contain the passed hash. For this functionality, just pass the "allSamples" flag along.
Note that if you are getting all samples from matching events, you can use all supported hash types (md5, sha1, sha256) for the lookup.
You can also get all the samples from an event with a given event ID, by passing along the eventID parameter. Make sure that either an event ID or a hash is passed along, otherwise an error message will be returned. Also, if no hash is set, the allSamples flag will get set automatically.
## Upload malware samples using the "Upload Sample" API
~~~~
https://<mispurl>/events/upload_sample/[Event_id]
~~~~
This API will allow you to populate an event that you have modify rights to with malware samples (and all related hashes). Alternatively, if you do not supply an event ID, it will create a new event for you.
The files have to be base64 encoded and POSTed as explained below. All samples will be zipped and password protected (with the password being "infected"). The hashes of the original file will be captured as additional attributes.
<dd>The Event's ID is optional. It can be either supplied via the URL or the POSTed object, but the URL has priority if both are provided. Not supplying an event ID will cause MISP to create a single new event for all of the POSTed malware samples. You can define the default settings for the event, otherwise a set of default settings will be used.</dd>
<dt>distribution</dt>
<dd>The distribution setting used for the attributes and for the newly created event, if relevant. [0-3]</dd>
<dt>to_ids</dt>
<dd>You can flag all attributes created during the transaction to be marked as "to_ids" or not.</dd>
<dt>category</dt>
<dd>The category that will be assigned to the uploaded samples. Valid options are: Payload delivery, Artifacts dropped, Payload Installation, External Analysis.</dd>
<dt>info</dt>
<dd>Used to populate the event info field if no event ID supplied. Alternatively, if not set, MISP will simply generate a message showing that it's a malware sample collection generated on the given day.</dd>
<dt>analysis</dt>
<dd>The analysis level of the newly created event, if applicable. [0-2] threat_level_id: The threat level ID of the newly created event, if applicatble. [0-3]</dd>
MISP allows sharing groups to be retrieved via the API.
~~~~
https://<mispurl>/sharing_groups/index.json
~~~~
Based on the API key used, the list of visible sharing groups will be returned in a JSON file. The JSON includes the organization parts of a given sharing group along with the associated server.
The most basic way is to POST a blank message to the Sightings API with the attribute ID or attribute UUID. This will create a sightings entry with the creation of the entry as the timestamp for the organisation of the authenticated user.
~~~~
https://<mispurl>/sightings/add/[attribute_id]
https://<mispurl>/sightings/add/[attribute_uuid]
~~~~
Alternatively, it is possible to POST a JSON object and gain additional granularity. The following fields are recognised by the API:
<dl>
<dt>id</dt>
<dd>The attribute's ID</dd>
<dt>uuid</dt>
<dd>The attribute's UUID</dd>
<dt>value</dt>
<dd>Will create a sighting for any attribute with the given value or for composite attributes, for the value matching any element of the attribute value</dd>
<dt>values</dt>
<dd>Expects a list, MISP will create sightings for any attribute matching any of the given values or for composite attributes, for any of the values matching any element of the attribute value</dd>
MISP will use the sightings related observables to gather all values and create sightings for each attribute that matches any of the values. If no related observables are provided in the Sighting object, then MISP will fall back to the Indicator itself and use its observables' values to create the sightings. The time of the sighting is the current time, unless the timestamp attribute is set on the Sightings object, in which case that is taken.
POSTing this as the message's body to MISP will sight any attributes visible to the user with he value "malicious2.example.com". For composite types, a match on a component will also trigger a sighting (so for example for attributes of type domain|ip a domain match would be sufficient).
If no Related observables are set in the Sighting itself, MISP will fall back to the observable directly contained in the indicator. So in the following example:
Return the index of warninglists enabled on the MISP instance
#### Parameters
- id
#### Output
~~~~json
...
{"Warninglists":[{"Warninglist":{"id":"17","name":"List of known Office 365 URLs and IP address ranges","type":"string","description":"Office 365 URLs and IP address ranges","version":"20170212","enabled":true,"warninglist_entry_count":"1516","valid_attributes":"ip-src, ip-dst, domain|ip, hostname"}},{"Warninglist":{"id":"16","name":"List of known google domains","type":"string","description":"Event contains one or more entries of known google domains","version":"3","enabled":true,"warninglist_entry_count":"665","valid_attributes":"domain, hostname, domain|ip"}},{"Warninglist":{"id":"15","name":"List of hashes for EICAR test virus","type":"string","description":"Event contains one or more entries based on hashes for EICAR test virus","version":"1","enabled":true,"warninglist_entry_count":"15","valid_attributes":"md5, sha1, sha256, sha512, filename|md5, filename|sha1, filename|sha256, filename|sha512"}},{"Warninglist":{"id":"14","name":"Top 1000 website from Alexa","type":"string","description":"Event contains one or more entries from the top 1000 of the most used website (Alexa).","version":"20170212","enabled":true,"warninglist_entry_count":"1000","valid_attributes":"hostname, domain"}},{"Warninglist":{"id":"13","name":"TLDs as known by IANA","type":"string","description":"Event contains one or more TLDs as attribute with an IDS flag set","version":"2","enabled":true,"warninglist_entry_count":"1290","valid_attributes":"hostname, domain, domain|ip"}},{"Warninglist":{"id":"12","name":"Second level TLDs as known by Mozilla Foundation","type":"string","description":"Event contains one or more second level TLDs as attribute with an IDS flag set","version":"2","enabled":true,"warninglist_entry_count":"6462","valid_attributes":"hostname, domain, domain|ip"}},{"Warninglist":{"id":"11","name":"List of RFC 5735 CIDR blocks","type":"cidr","description":"Event contains one or more entries part of the RFC 5735 CIDR blocks - Special Use IPv4 Addresses","version":"2","enabled":true,"warninglist_entry_count":"15","valid_attributes":"ip-src, ip-dst, domain|ip"}},{"Warninglist":{"id":"10","name":"List of RFC 3849 CIDR blocks","type":"cidr","description":"Event contains one or more entries part of the IPv6 documentation prefix (RFC 3849)","version":"2","enabled":true,"warninglist_entry_count":"1","valid_attributes":"ip-src, ip-dst, domain|ip"}},{"Warninglist":{"id":"9","name":"List of RFC 1918 CIDR blocks","type":"cidr","description":"Event contains one or more entries part of the RFC 1918 CIDR blocks","version":"2","enabled":true,"warninglist_entry_count":"3","valid_attributes":"ip-src, ip-dst, domain|ip"}},{"Warninglist":{"id":"8","name":"List of known IPv6 public DNS resolvers","type":"string","description":"Event contains one or more public IPv6 DNS resolvers as attribute with an IDS flag set","version":"20160803","enabled":true,"warninglist_entry_count":"172","valid_attributes":"ALL"}},{"Warninglist":{"id":"7","name":"List of known IPv4 public DNS resolvers","type":"string","description":"Event contains one or more public IPv4 DNS resolvers as attribute with an IDS flag set","version":"20160803","enabled":true,"warninglist_entry_count":"77857","valid_attributes":"ALL"}},{"Warninglist":{"id":"6","name":"List of RFC 5771 multicast CIDR blocks","type":"cidr","description":"Event contains one or more entries part of the RFC 5771 multicast CIDR blocks","version":"2","enabled":true,"warninglist_entry_count":"16","valid_attributes":"ip-src, ip-dst, domain|ip"}},{"Warninglist":{"id":"5","name":"List of known microsoft domains","type":"string","description":"Event contains one or more entries of known microsoft domains","version":"1","enabled":true,"warninglist_entry_count":"152","valid_attributes":"domain, hostname, domain|ip"}},{"Warninglist":{"id":"4","name":"List of IPv6 link local blocks","type":"cidr","description":"Event contains one or more entries part of the IPv6 link local prefix (RFC 4291)","version":"1","enabled":true,"warninglist_entry_count":"1","valid_attributes":"ip-src, ip-dst, domain|ip"}}
If you are interested in the attribute type or attribute category data distribution on your instance, MISP offers an API that will create an aggregates list. To access the API, simple sent a GET request to:
<dd>Set whether you are interested in the type or category statistics of your instance. This parameter can be either set to "type" or "category", with type being the default setting if the parameter is not set.</dd>
