2021-03-05 15:29:58 +01:00
#!/usr/bin/env bash
############################################################
###### #
##### Please AutoGenerated... ##
#### Do NOT was ###
### Manually It ####
## Change this Script... #####
# ######
############################################################
############################################################
#INSTALLATION INSTRUCTIONS #
##########################################################
#------------------------- for Debian Flavored Linux Distributions
#
#-------------------------------------------------------|
# 0/ Quick MISP Instance on Debian Based Linux - Status |
#-------------------------------------------------------|
#
# 20200513: Ubuntu 20.04 tested and working. -- sCl
# 20200412: Ubuntu 18.04.4 tested and working. -- sCl
# 20190302: Ubuntu 18.04.2 tested and working. -- sCl
# 20190208: Kali Linux tested and working. -- sCl
#
#
#-------------------------------------------------------------------------------------------------|
# 1/ For other Debian based Linux distributions, download script and run as **unprivileged** user |
#-------------------------------------------------------------------------------------------------|
#
# The following installs only MISP Core:
# $ wget --no-cache -O /tmp/INSTALL.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh ; bash /tmp/INSTALL.sh -c
#
# This will install MISP Core and misp-modules
# $ wget --no-cache -O /tmp/INSTALL.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh ; bash /tmp/INSTALL.sh -c -M
#
#
#-------------------------------------------------------|
# 2/ For Kali, download and run Installer Script |
#-------------------------------------------------------|
#
# To install MISP on Kali copy paste the following to your shell:
# # wget --no-cache -O /tmp/misp-kali.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh && bash /tmp/misp-kali.sh
# NO other version then 2020.x supported, kthxbai.
# /!\ Please read the installer script before randomly doing the above.
# The script is tested on a plain vanilla Kali Linux Boot CD and installs quite a few dependencies.
#
#
#----------------------------------------------------------|
# 3/ The following script has been partially autogenerated |
#----------------------------------------------------------|
#
# To generate this script yourself, the following steps need to be taken.
# $ git clone https://github.com/SteveClement/xsnippet.git
# Make sure xsnippet resides somewhere in your $PATH - It is a shell script so a simple, copy to somewhere sane is enough.
# $ git clone https://github.com/MISP/MISP.git
# $ cd MISP/INSTALL ; ./INSTALL.tpl.sh
#
##
###
####----------------\
## Developer Note |
####--------------------------------------------------------------------------------------------------|
## In theory the order does not matter as everything is a self-contained function. |
# That said, ideally leave the order as is and do NOT change the lines as they are place-holders. |
# Script files that do NOT have a #_name.sh are scripts that have NO functions. This is by design. |
#-----------------------------------------------------------------------------------------------------|
#
# ToC #
#
#### BEGIN AUTOMATED SECTION ####
#
# $ eval "$(curl -fsSL https://raw.githubusercontent.com/MISP/MISP/2.4/docs/generic/globalVariables.md | grep -v \`\`\`)"
# $ MISPvars
MISPvars ( ) {
debug " Setting generic ${ LBLUE } MISP ${ NC } variables shared by all flavours " 2> /dev/null
# Local non-root MISP user
MISP_USER = " ${ MISP_USER :- misp } "
MISP_PASSWORD = " ${ MISP_PASSWORD :- $( openssl rand -hex 32) } "
# The web server user
# RHEL/CentOS
if [ [ -f "/etc/redhat-release" ] ] ; then
WWW_USER = "apache"
SUDO_WWW = " sudo -H -u ${ WWW_USER } "
# Debian flavoured
elif [ [ -f "/etc/debian_version" ] ] ; then
WWW_USER = "www-data"
SUDO_WWW = " sudo -H -u ${ WWW_USER } "
# OpenBSD
elif [ [ " $( uname -s) " = = "OpenBSD" ] ] ; then
WWW_USER = "www"
PATH_TO_MISP = " ${ PATH_TO_MISP :- /var/www/htdocs/MISP } "
SUDO_WWW = "doas -u www "
SUDO_CMD = "doas "
# NetBSD
elif [ [ " $( uname -s) " = = "NetBSD" ] ] ; then
WWW_USER = "www"
PATH_TO_MISP = " $PATH_TO_MISP :-/usr/pkg/share/httpd/htdocs/MISP} "
SUDO_WWW = " sudo -H -u ${ WWW_USER } "
else
# I am feeling lucky
WWW_USER = "www-data"
SUDO_WWW = " sudo -H -u ${ WWW_USER } "
fi
# MISP configuration variables
PATH_TO_MISP = " ${ PATH_TO_MISP :- /var/www/MISP } "
PATH_TO_MISP_SCRIPTS = " ${ PATH_TO_MISP } /app/files/scripts "
FQDN = " ${ FQDN :- misp .local } "
MISP_BASEURL = " ${ MISP_BASEURL :- "" } "
MISP_LIVE = "1"
# Database configuration
DBHOST = " ${ DBHOST :- localhost } "
DBNAME = " ${ DBNAME :- misp } "
DBUSER_ADMIN = " ${ DBUSER_ADMIN :- root } "
DBPASSWORD_ADMIN = " ${ DBPASSWORD_ADMIN :- $( openssl rand -hex 32) } "
DBUSER_MISP = " ${ DBUSER_MISP :- misp } "
DBPASSWORD_MISP = " ${ DBPASSWORD_MISP :- $( openssl rand -hex 32) } "
# OpenSSL configuration
OPENSSL_CN = ${ FQDN }
OPENSSL_C = "LU"
OPENSSL_ST = "State"
OPENSSL_L = "Location"
OPENSSL_O = "Organization"
OPENSSL_OU = "Organizational Unit"
OPENSSL_EMAILADDRESS = " info@ ${ FQDN } "
# GPG configuration
GPG_REAL_NAME = "Autogenerated Key"
# On a REAL install, please do not set a comment, see here for why: https://www.debian-administration.org/users/dkg/weblog/97
GPG_COMMENT = "WARNING: MISP AutoGenerated Key consider this Key VOID!"
GPG_EMAIL_ADDRESS = "admin@admin.test"
# 3072 bits used as per suggestions here: https://riseup.net/en/security/message-security/openpgp/best-practices
GPG_KEY_LENGTH = "3072"
GPG_PASSPHRASE = " $( openssl rand -hex 32) "
# debug alias to make sure people are not confused when blindly copy pasting blobs of code
alias debug = "echo -e"
# checkAptLock alias to make sure people are not confused when blindly copy pasting blobs of code
alias checkAptLock = "echo 'Function used in Installer to make sure apt is not locked'"
# php.ini configuration
upload_max_filesize = "50M"
post_max_size = "50M"
max_execution_time = "300"
memory_limit = "2048M"
CAKE = " ${ PATH_TO_MISP } /app/Console/cake "
# sudo config to run $LUSER commands
if [ [ " $( groups ${ MISP_USER } | grep -o 'staff' ) " = = "staff" ] ] ; then
SUDO_CMD = " sudo -H -u ${ MISP_USER } -g staff "
else
SUDO_CMD = " sudo -H -u ${ MISP_USER } "
fi
echo "The following DB Passwords were generated..."
echo " Admin ( ${ DBUSER_ADMIN } ) DB Password: ${ DBPASSWORD_ADMIN } "
echo " User ( ${ DBUSER_MISP } ) DB Password: ${ DBPASSWORD_MISP } "
}
# Leave empty for NO debug messages, if run with set -x or bash -x it will enable DEBUG by default
DEBUG =
case " $- " in
*x*) NO_PROGRESS = 1; DEBUG = 1 ; ;
*) NO_PROGRESS = 0 ; ;
esac
## Function Section ##
## Usage of this script
usage ( ) {
if [ " $0 " = = "bash" ] ; then
WEB_INSTALL = 1
SCRIPT_NAME = "Web Installer Command"
else
SCRIPT_NAME = $0
fi
space
echo -e " Please specify what type of ${ LBLUE } MISP ${ NC } setup you want to install. "
space
echo -e " ${ SCRIPT_NAME } -c | Install ONLY ${ LBLUE } MISP ${ NC } Core " # core
echo -e " -M | ${ LBLUE } MISP ${ NC } modules " # modules
## FIXME: The current state of misp-dashboard is broken, disabling any use.
##echo -e " -D | ${LBLUE}MISP${NC} dashboard" # dashboard
## FIXME: The current state of Viper is broken, disabling any use.
##echo -e " -V | Viper" # viper
echo -e " -m | Mail 2 ${ LBLUE } MISP ${ NC } " # mail2
echo -e " -S | Experimental ssdeep correlations" # ssdeep
echo -e " -A | Install ${ YELLOW } all ${ NC } of the above " # all
space
echo -e " -C | Only do ${ YELLOW } pre-install checks and exit ${ NC } " # pre
space
echo -e " -u | Do an unattended Install, no questions asked" # UNATTENDED
echo -e " ${ HIDDEN } -U | Attempt and upgrade of selected item ${ NC } " # UPGRADE
echo -e " ${ HIDDEN } -N | Nuke this MISP Instance ${ NC } " # NUKE
echo -e " ${ HIDDEN } -f | Force test install on current Ubuntu LTS schim, add -B for 18.04 -> 18.10, or -BB 18.10 -> 19.10) ${ NC } " # FORCE
echo -e " Options can be combined: ${ SCRIPT_NAME } -c -D # Will install Core+Dashboard "
space
echo -e "Recommended is either a barebone MISP install (ideal for syncing from other instances) or"
echo -e " MISP + modules - ${ SCRIPT_NAME } -c -M "
echo -e ""
echo -e ""
echo -e "Interesting environment variables that get considered are:"
echo -e ""
echo -e "MISP_USER/MISP_PASSWORD # Local username on machine, default: misp/opensslGeneratedPassword"
echo -e ""
echo -e "PATH_TO_MISP # Where MISP will be installed, default: /var/www/MISP (recommended)"
echo -e ""
echo -e "DBHOST/DBNAME # database hostname, MISP database name, default: localhost/misp"
echo -e "DBUSER_ADMIN/DBPASSWORD_ADMIN # MySQL admin user, default: root/opensslGeneratedPassword"
echo -e "DBUSER_MISP/DBPASSWORD_MISP # MISP database user, default: misp/opensslGeneratedPassword"
echo -e ""
echo -e "You need to export the variable(s) to be taken into account. (or specified in-line when invoking INSTALL.sh)"
space
}
# Check if element is contained in array
containsElement ( ) {
local e match = " $1 "
shift
for e; do [ [ " $e " = = " $match " ] ] && return 0; done
return 1
}
checkOpt ( ) {
# checkOpt feature
containsElement $1 " ${ options [@] } "
}
setOpt ( ) {
options = ( )
for o in $@ ; do
case " $o " in
( "-c" ) echo "core" ; CORE = 1 ; ;
( "-V" ) echo "viper" ; VIPER = 1 ; ;
( "-M" ) echo "modules" ; MODULES = 1 ; ;
( "-D" ) echo "dashboard" ; DASHBOARD = 1 ; ;
( "-m" ) echo "mail2" ; MAIL2 = 1 ; ;
( "-S" ) echo "ssdeep" ; SSDEEP = 1 ; ;
( "-A" ) echo "all" ; ALL = 1 ; ;
( "-C" ) echo "pre" ; PRE = 1 ; ;
( "-U" ) echo "upgrade" ; UPGRADE = 1 ; ;
( "-N" ) echo "nuke" ; NUKE = 1 ; ;
( "-u" ) echo "unattended" ; UNATTENDED = 1 ; ;
( "-ni" ) echo "noninteractive" ; NONINTERACTIVE = 1 ; ;
( "-f" ) echo "force" ; FORCE = 1 ; ;
( *) echo " $o is not a valid argument " ; exit 1 ; ;
esac
done
}
# check if command_exists
command_exists ( ) {
command -v " $@ " > /dev/null 2>& 1
}
# TODO: fix os detection mess
# Try to detect what we are running on
checkCoreOS ( ) {
# lsb_release can exist on any platform. RedHat package: redhat-lsb
LSB_RELEASE = $( which lsb_release > /dev/null ; echo $? )
APT = $( which apt > /dev/null 2>& 1; echo -n $? )
APT_GET = $( which apt-get > /dev/null 2>& 1; echo $? )
# debian specific
# /etc/debian_version
## os-release #generic
# /etc/os-release
# Redhat checks
if [ [ -f "/etc/redhat-release" ] ] ; then
echo "This is some redhat flavour"
REDHAT = 1
RHfla = $( cat /etc/redhat-release | cut -f 1 -d\ | tr '[:upper:]' '[:lower:]' )
fi
}
# Extract debian flavour
checkFlavour ( ) {
FLAVOUR = ""
# Every system that we officially support has /etc/os-release
if [ -r /etc/os-release ] ; then
FLAVOUR = " $( . /etc/os-release && echo " $ID " | tr '[:upper:]' '[:lower:]' ) "
fi
case " ${ FLAVOUR } " in
ubuntu)
if command_exists lsb_release; then
dist_version = " $( lsb_release --codename | cut -f2) "
fi
if [ -z " $dist_version " ] && [ -r /etc/lsb-release ] ; then
dist_version = " $( . /etc/lsb-release && echo " $DISTRIB_CODENAME " ) "
fi
; ;
debian| raspbian)
dist_version = " $( sed 's/\/.*//' /etc/debian_version | sed 's/\..*//' ) "
case " $dist_version " in
10)
dist_version = "buster"
; ;
9)
dist_version = "stretch"
; ;
esac
; ;
centos)
if [ -z " $dist_version " ] && [ -r /etc/os-release ] ; then
dist_version = " $( . /etc/os-release && echo " $VERSION_ID " ) "
dist_version = ${ dist_version : 0 : 1 }
fi
echo " ${ FLAVOUR } support is experimental at the moment "
; ;
rhel| ol| sles)
if [ -z " $dist_version " ] && [ -r /etc/os-release ] ; then
dist_version = " $( . /etc/os-release && echo " $VERSION_ID " ) "
dist_version = ${ dist_version : 0 : 1 } # Only interested about major version
fi
# Only tested for RHEL 7 so far
echo " ${ FLAVOUR } support is experimental at the moment "
; ;
*)
if command_exists lsb_release; then
dist_version = " $( lsb_release --release | cut -f2) "
fi
if [ -z " $dist_version " ] && [ -r /etc/os-release ] ; then
dist_version = " $( . /etc/os-release && echo " $VERSION_ID " ) "
fi
; ;
esac
# FIXME: The below want to be refactored
if [ " ${ FLAVOUR } " = = "ubuntu" ] ; then
RELEASE = $( lsb_release -s -r)
debug " We detected the following Linux flavour: ${ YELLOW } $( tr '[:lower:]' '[:upper:]' <<< ${ FLAVOUR : 0 : 1 } ) ${ FLAVOUR : 1 } ${ RELEASE } ${ NC } "
else
debug " We detected the following Linux flavour: ${ YELLOW } $( tr '[:lower:]' '[:upper:]' <<< ${ FLAVOUR : 0 : 1 } ) ${ FLAVOUR : 1 } ${ NC } "
fi
}
# Check if this is a forked Linux distro
check_forked ( ) {
# Check for lsb_release command existence, it usually exists in forked distros
if command_exists lsb_release; then
# Check if the `-u` option is supported
set +e
lsb_release -a -u > /dev/null 2>& 1
lsb_release_exit_code = $?
set -e
# Check if the command has exited successfully, it means we're in a forked distro
if [ " $lsb_release_exit_code " = "0" ] ; then
# Print info about current distro
cat <<-EOF
You're using ' ${ FLAVOUR } ' version ' ${ dist_version } ' .
EOF
# Get the upstream release info
FLAVOUR = $( lsb_release -a -u 2>& 1 | tr '[:upper:]' '[:lower:]' | grep -E 'id' | cut -d ':' -f 2 | tr -d '[:space:]' )
dist_version = $( lsb_release -a -u 2>& 1 | tr '[:upper:]' '[:lower:]' | grep -E 'codename' | cut -d ':' -f 2 | tr -d '[:space:]' )
# Print info about upstream distro
cat <<-EOF
Upstream release is '${FLAVOUR}' version '$dist_version' .
EOF
else
if [ [ -r /etc/debian_version ] ] && [ [ " ${ FLAVOUR } " != "ubuntu" ] ] && [ [ " ${ FLAVOUR } " != "raspbian" ] ] ; then
# We're Debian and don't even know it!
FLAVOUR = debian
dist_version = " $( sed 's/\/.*//' /etc/debian_version | sed 's/\..*//' ) "
case " $dist_version " in
10)
dist_version = "buster"
; ;
9)
dist_version = "stretch"
; ;
8| 'Kali Linux 2' )
dist_version = "jessie"
; ;
esac
fi
fi
fi
}
checkInstaller ( ) {
# Workaround: shasum is not available on RHEL, only checking sha512
if [ [ " ${ FLAVOUR } " = = "rhel" ] ] || [ [ " ${ FLAVOUR } " = = "centos" ] ] ; then
INSTsum = $( sha512sum ${ 0 } | cut -f1 -d\ )
2021-03-05 20:02:59 +01:00
/usr/bin/wget --no-cache -q -O /tmp/INSTALL.sh.sha512 https://raw.githubusercontent.com/stevengoossensB/misp-docker/master/web/INSTALL_NODB.sh.sha512
2021-03-05 15:29:58 +01:00
chsum = $( cat /tmp/INSTALL.sh.sha512)
if [ [ " ${ chsum } " = = " ${ INSTsum } " ] ] ; then
echo "SHA512 matches"
else
echo " SHA512: ${ chsum } does not match the installer sum of: ${ INSTsum } "
# exit 1 # uncomment when/if PR is merged
fi
else
# TODO: Implement $FLAVOUR checks and install depending on the platform we are on
if [ [ $( which shasum > /dev/null 2>& 1 ; echo $? ) -ne 0 ] ] ; then
checkAptLock
sudo apt install libdigest-sha-perl -qyy
fi
# SHAsums to be computed, not the -- notatiation is for ease of use with rhash
SHA_SUMS = "--sha1 --sha256 --sha384 --sha512"
for sum in $( echo ${ SHA_SUMS } | sed 's/--sha//g' ) ; do
2021-03-05 20:02:59 +01:00
/usr/bin/wget --no-cache -q -O /tmp/INSTALL.sh.sha${ sum } https://raw.githubusercontent.com/stevengoossensB/misp-docker/master/web/INSTALL_NODB.sh.sha${ sum }
2021-03-05 15:29:58 +01:00
INSTsum = $( shasum -a ${ sum } ${ 0 } | cut -f1 -d\ )
chsum = $( cat /tmp/INSTALL.sh.sha${ sum } | cut -f1 -d\ )
if [ [ " ${ chsum } " = = " ${ INSTsum } " ] ] ; then
echo " sha ${ sum } matches "
else
echo " sha ${ sum } : ${ chsum } does not match the installer sum of: ${ INSTsum } "
echo "Delete installer, re-download and please run again."
exit 1
fi
done
fi
}
# Extract manufacturer
checkManufacturer ( ) {
if [ [ -z $( which dmidecode) ] ] ; then
checkAptLock
sudo apt install dmidecode -qy
fi
MANUFACTURER = $( sudo dmidecode -s system-manufacturer)
debug ${ MANUFACTURER }
}
# Dynamic horizontal spacer if needed, for autonomeous an no progress bar install, we are static.
space ( ) {
if [ [ " $NO_PROGRESS " = = "1" ] ] || [ [ " $PACKER " = = "1" ] ] ; then
echo "--------------------------------------------------------------------------------"
return
fi
# Check terminal width
num = ` tput cols`
for i in ` seq 1 $num ` ; do
echo -n "-"
done
echo ""
}
# Spinner so the user knows something is happening
spin( )
{
if [ [ " $NO_PROGRESS " = = "1" ] ] ; then
return
fi
spinner = "/|\\-/|\\-"
while :
do
for i in ` seq 0 7`
do
echo -n " ${ spinner : $i : 1 } "
echo -en "\010"
sleep 0.$i
done
done
}
# Progress bar
progress ( ) {
progress = $[ $progress +$1 ]
if [ [ " $NO_PROGRESS " = = "1" ] ] || [ [ " $PACKER " = = "1" ] ] ; then
echo " progress= ${ progress } " > /tmp/INSTALL.stat
return
fi
bar = "#"
# Prevent progress of overflowing
if [ [ $progress -ge 100 ] ] ; then
echo -ne "##################################################################################################### (100%)\r"
return
fi
# Display progress
for p in $( seq 1 $progress ) ; do
bar += "#"
echo -ne " $bar ( $p %)\r "
done
echo -ne '\n'
echo " progress= ${ progress } " > /tmp/INSTALL.stat
}
# Check locale
checkLocale ( ) {
debug "Checking Locale"
# If locale is missing, generate and install a common UTF-8
if [ [ ! -f /etc/default/locale || $( wc -l /etc/default/locale| cut -f 1 -d\ ) -eq "1" ] ] ; then
checkAptLock
sudo DEBIAN_FRONTEND = noninteractive apt install locales -qy
sudo sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/g' /etc/locale.gen
sudo locale-gen en_US.UTF-8
sudo update-locale LC_ALL = en_US.UTF-8 LANG = en_US.UTF-8
fi
}
# Simple function to check command exit code
checkFail ( ) {
# '-ne' checks for numerical differences, '==' used for strings
if [ [ $2 -ne 0 ] ] ; then
echo " iAmError: $1 "
echo " The last command exited with error code: $2 "
exit $2
fi
}
ask_o ( ) {
ANSWER = ""
if [ -z " ${ 1 } " ] ; then
echo "This function needs at least 1 parameter."
exit 1
fi
[ -z " ${ 2 } " ] && OPT1 = "y" || OPT1 = " ${ 2 } "
[ -z " ${ 3 } " ] && OPT2 = "n" || OPT2 = " ${ 3 } "
while true; do
case " ${ ANSWER } " in " ${ OPT1 } " | " ${ OPT2 } " ) break ; ; esac
echo -e -n " ${ 1 } ( ${ OPT1 } / ${ OPT2 } ) "
read ANSWER
ANSWER = $( echo " ${ ANSWER } " | tr '[:upper:]' '[:lower:]' )
done
}
clean ( ) {
rm /tmp/INSTALL.stat
rm /tmp/INSTALL.sh.*
}
# Check if misp user is present and if run as root
checkID ( ) {
debug " Checking if run as root and $MISP_USER is present "
if [ [ $EUID -eq 0 ] ] ; then
echo "This script cannot be run as a root"
clean > /dev/null 2>& 1
exit 1
elif [ [ $( id $MISP_USER >/dev/null; echo $? ) -ne 0 ] ] ; then
if [ [ " $UNATTENDED " != "1" ] ] ; then
echo " There is NO user called ' $MISP_USER ' create a user ' $MISP_USER ' (y) or continue as $USER (n)? (y/n) "
read ANSWER
ANSWER = $( echo $ANSWER | tr '[:upper:]' '[:lower:]' )
INSTALL_USER = ${ USER }
else
ANSWER = "y"
fi
if [ [ $ANSWER = = "y" ] ] ; then
sudo useradd -s /bin/bash -m -G adm,cdrom,sudo,dip,plugdev,www-data,staff $MISP_USER
echo $MISP_USER :$MISP_PASSWORD | sudo chpasswd
echo " User $MISP_USER added, password is: $MISP_PASSWORD "
elif [ [ $ANSWER = = "n" ] ] ; then
echo " Using $USER as install user, hope that is what you want. "
echo -e " ${ RED } Adding $USER to groups $WWW_USER and staff ${ NC } "
MISP_USER = $USER
sudo adduser $MISP_USER staff
sudo adduser $MISP_USER $WWW_USER
else
echo "yes or no was asked, try again."
sudo adduser $MISP_USER staff
sudo adduser $MISP_USER $WWW_USER
exit 1
fi
else
echo " User ${ MISP_USER } exists, skipping creation "
echo -e " ${ RED } Adding $MISP_USER to groups $WWW_USER and staff ${ NC } "
sudo adduser $MISP_USER staff
sudo adduser $MISP_USER $WWW_USER
fi
# FIXME: the below SUDO_CMD check is a duplicate from global variables, try to have just one check
# sudo config to run $LUSER commands
if [ [ " $( groups ${ MISP_USER } | grep -o 'staff' ) " = = "staff" ] ] ; then
SUDO_CMD = " sudo -H -u ${ MISP_USER } -g staff "
else
SUDO_CMD = " sudo -H -u ${ MISP_USER } "
fi
}
# pre-install check to make sure what we will be installing on, is ready and not a half installed system
preInstall ( ) {
# preInstall needs to be able to be called before ANY action. Install/Upgrade/AddTool
# Pre install wants to be the place too where the following is checked and set via ENV_VAR:
# Check if composer is installed and functioning
# Check if misp db is installed (API call would confirm that the DB indeed works)
# Check apache config (Maybe try to talk to the server via api, this would confirm quite a lot)
# Check if workers are running/installed, maybe kick them if they are not
# /var/www/MISP/app/Config/[bootstrap,databases,core,config].php exists
# /var/www/MISP perms are correct (for $SUDO_WWW useage)
#
# Check if $PATH_TO_MISP exists and is writable by $WWW_USER
[ [ -d " $PATH_TO_MISP " ] ] && PATH_TO_MISP_EXISTS = 1 && echo " $PATH_TO_MISP exists "
# .git exists and git is working for $WWW_USER
[ [ -d " $PATH_TO_MISP /.git " ] ] && PATH_TO_GIT_EXISTS = 1 && echo " $PATH_TO_MISP /.git exists " && cd $PATH_TO_MISP && $SUDO_WWW git status
# .gnupg exists and working correctly
[ [ -d " $PATH_TO_MISP /.gnupg " ] ] && PATH_TO_GNUPG_EXISTS = 1 && echo " $PATH_TO_MISP /.gnupg exists "
# Extract username, password and dbname
##cat database.php |grep -v // |grep -e database -e login -e password |tr -d \' |tr -d \ |tr -d , |tr -d \>
DBPASSWORD_MISP = $( cat database.php | grep -v // | grep -e password | tr -d \' | tr -d \ | tr -d , | tr -d \> | cut -f 2 -d= )
DBUSER_MISP = $( cat database.php | grep -v // | grep -e login | tr -d \' | tr -d \ | tr -d , | tr -d \> | cut -f 2 -d= )
DBNAME = $( cat database.php | grep -v // | grep -e database | tr -d \' | tr -d \ | tr -d , | tr -d \> | cut -f 2 -d= )
AUTH_KEY = $( mysql -h $DBHOST --disable-column-names -B -u $DBUSER_MISP -p" $DBPASSWORD_MISP " $DBNAME -e 'SELECT authkey FROM users WHERE role_id=1 LIMIT 1' )
# Check if db exists
[ [ -d " /var/lib/mysql/ $DBNAME " ] ] && MISP_DB_DIR_EXISTS = 1 && echo " /var/lib/mysql/ $DBNAME exists "
echo -e " ${ RED } Place-holder, not implemented yet. ${ NC } "
exit
}
# Upgrade function
upgrade ( ) {
headerJSON = "application/json"
Acc = "Accept:"
Autho = "Authorization:"
CT = "Content-Type:"
MISP_BASEURL = "https://127.0.0.1"
${ SUDO_WWW } sh -c " cd ${ PATH_TO_MISP } /app ; php composer.phar update ; php composer.phar self-update "
for URN in $( echo "galaxies warninglists noticelists objectTemplates taxonomies" ) ; do
curl --header " $Autho $AUTH_KEY " --header " $Acc $headerJSON " --header " $CT $headerJSON " -k -X POST $MISP_BASEURL /$URN /update
done
echo -e " ${ RED } Place-holder, not implemented yet. ${ NC } "
exit
}
# check is /usr/local/src is RW by misp user
checkUsrLocalSrc ( ) {
echo ""
if [ [ -e /usr/local/src ] ] ; then
WRITEABLE = $( sudo -H -u $MISP_USER touch /usr/local/src 2> /dev/null ; echo $? )
if [ [ " $WRITEABLE " = = "0" ] ] ; then
echo " Good, /usr/local/src exists and is writeable as $MISP_USER "
else
# TODO: The below might be shorter, more elegant and more modern
#[[ -n $KALI ]] || [[ -n $UNATTENDED ]] && echo "Just do it"
sudo chmod 2775 /usr/local/src
sudo chown root:staff /usr/local/src
fi
else
echo "/usr/local/src does not exist, creating."
mkdir -p /usr/local/src
sudo chmod 2775 /usr/local/src
# TODO: Better handling /usr/local/src permissions
if [ [ " $( cat /etc/group | grep staff > /dev/null 2>& 1) " = = "0" ] ] ; then
sudo chown root:staff /usr/local/src
fi
fi
}
kaliSpaceSaver ( ) {
# Future function in case Kali overlay on LiveCD is full
echo " ${ RED } Not implement ${ NC } "
}
# FIXME: Kali now uses kali/kali instead of root/toor
# Because Kali is l33t we make sure we DO NOT run as root
kaliOnTheR0ckz ( ) {
totalRoot = $( df -k | grep /$ | awk '{ print $2 }' )
totalMem = $( cat /proc/meminfo| grep MemTotal | grep -Eo '[0-9]{1,}' )
overlay = $( df -kh | grep overlay; echo $? ) # if 1 overlay NOT present
if [ [ ${ totalRoot } -lt 3059034 ] ] ; then
echo "(If?) You run Kali in LiveCD mode and we need more overlay disk space."
echo " This is defined by the total memory, you have: ${ totalMem } kB which is not enough. "
echo "6-8Gb should be fine. (need >3Gb overlayFS)"
exit 1
fi
if [ [ ${ EUID } -eq 0 ] ] ; then
echo "This script must NOT be run as root"
exit 1
elif [ [ $( id ${ MISP_USER } >/dev/null; echo $? ) -ne 0 ] ] ; then
sudo useradd -s /bin/bash -m -G adm,cdrom,sudo,dip,plugdev,www-data,staff ${ MISP_USER }
echo ${ MISP_USER } :${ MISP_PASSWORD } | sudo chpasswd
else
# TODO: Make sure we consider this further down the road
echo " User ${ MISP_USER } exists, skipping creation "
fi
}
setBaseURL ( ) {
debug "Setting Base URL"
CONN = $( ip -br -o -4 a | grep UP | head -1 | tr -d "UP" )
IFACE = $( echo $CONN | awk { 'print $1' } )
IP = $( echo $CONN | awk { 'print $2' } | cut -f1 -d/)
[ [ -n ${ MANUFACTURER } ] ] || checkManufacturer
if [ [ " ${ MANUFACTURER } " != "innotek GmbH" ] ] && [ [ " $MANUFACTURER " != "VMware, Inc." ] ] && [ [ " $MANUFACTURER " != "QEMU" ] ] ; then
debug "We guess that this is a physical machine and cannot reliably guess what the MISP_BASEURL might be."
if [ [ " ${ UNATTENDED } " != "1" ] ] ; then
echo "You can now enter your own MISP_BASEURL, if you wish to NOT do that, the MISP_BASEURL will be empty, which will work, but ideally you configure it afterwards."
echo "Do you want to change it now? (y/n) "
read ANSWER
ANSWER = $( echo ${ ANSWER } | tr '[:upper:]' '[:lower:]' )
if [ [ " ${ ANSWER } " = = "y" ] ] ; then
if [ [ ! -z ${ IP } ] ] ; then
echo " It seems you have an interface called ${ IFACE } UP with the following IP: ${ IP } - FYI "
echo " Thus your Base URL could be: https:// ${ IP } "
fi
echo "Please enter the Base URL, e.g: 'https://example.org'"
echo ""
echo -n "Enter Base URL: "
read MISP_BASEURL
else
MISP_BASEURL = '""'
fi
else
MISP_BASEURL = "https://misp.local"
# Webserver configuration
FQDN = 'misp.local'
fi
elif [ [ " ${ KALI } " = = "1" ] ] ; then
MISP_BASEURL = "https://misp.local"
# Webserver configuration
FQDN = 'misp.local'
elif [ [ " ${ MANUFACTURER } " = = "innotek GmbH" ] ] ; then
MISP_BASEURL = 'https://localhost:8443'
IP = $( ip addr show | awk '$1 == "inet" {gsub(/\/.*$/, "", $2); print $2}' | grep -v "127.0.0.1" | tail -1)
sudo iptables -t nat -A OUTPUT -p tcp --dport 8443 -j DNAT --to ${ IP } :443
# Webserver configuration
FQDN = 'localhost.localdomain'
elif [ [ " ${ MANUFACTURER } " = = "VMware, Inc." ] ] ; then
MISP_BASEURL = '""'
# Webserver configuration
FQDN = 'misp.local'
else
MISP_BASEURL = '""'
# Webserver configuration
FQDN = 'misp.local'
fi
}
# Test and install software RNG
installRNG ( ) {
sudo modprobe tpm-rng 2> /dev/null
if [ " $? " -eq "0" ] ; then
echo tpm-rng | sudo tee -a /etc/modules
fi
checkAptLock
sudo apt install -qy rng-tools # This might fail on TPM grounds, enable the security chip in your BIOS
sudo service rng-tools start
if [ " $? " -eq "1" ] ; then
sudo apt purge -qy rng-tools
sudo apt install -qy haveged
sudo /etc/init.d/haveged start
fi
}
# Kali upgrade
kaliUpgrade ( ) {
debug "Running various Kali upgrade tasks"
checkAptLock
sudo DEBIAN_FRONTEND = noninteractive apt update
sudo DEBIAN_FRONTEND = noninteractive apt install --only-upgrade bash libc6 -y
sudo DEBIAN_FRONTEND = noninteractive apt autoremove -y
}
# Disables sleep
disableSleep ( ) {
gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0 2> /dev/null
gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 0 2> /dev/null
gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type nothing 2> /dev/null
gsettings set org.gnome.desktop.screensaver lock-enabled false 2> /dev/null
gsettings set org.gnome.desktop.screensaver idle-activation-enabled false 2> /dev/null
setterm -blank 0 -powersave off -powerdown 0
xset s 0 0 2> /dev/null
xset dpms 0 0 2> /dev/null
xset dpms force off
xset s off 2> /dev/null
service sleepd stop
kill $( lsof | grep 'sleepd' | awk '{print $2}' )
checkAptLock
}
# Remove alias if present
if [ [ $( type -t checkAptLock) = = "alias" ] ] ; then unalias checkAptLock; fi
# Simple function to make sure APT is not locked
checkAptLock ( ) {
SLEEP = 3
if [ [ -n ${ APT_UPDATED } ] ] ; then
sudo apt update && APT_UPDATED = 1
fi
while [ " $DONE " != "0" ] ; do
sudo apt-get check 2> /dev/null > /dev/null && DONE = 0
sleep $SLEEP
SLEEP = $[ $SLEEP +3]
done
unset DONE
}
# Install Php 7.0 dependencies
installDepsPhp70 ( ) {
debug "Installing PHP 7.0 dependencies"
PHP_ETC_BASE = /etc/php/7.0
PHP_INI = ${ PHP_ETC_BASE } /apache2/php.ini
checkAptLock
sudo apt install -qy \
libapache2-mod-php \
php php-cli \
php-dev \
php-json php-xml php-mysql php-opcache php-readline php-mbstring php-zip \
php-redis php-gnupg \
php-gd
for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
do
sudo sed -i " s/^\( $key \).*/\1 = $( eval echo \$ { $key } ) / " $PHP_INI
done
}
# Install Php 7.3 deps
installDepsPhp73 ( ) {
debug "Installing PHP 7.3 dependencies"
PHP_ETC_BASE = /etc/php/7.3
PHP_INI = ${ PHP_ETC_BASE } /apache2/php.ini
checkAptLock
if [ [ ! -n ${ KALI } ] ] ; then
sudo apt install -qy \
libapache2-mod-php7.3 \
php7.3 php7.3-cli \
php7.3-dev \
php7.3-json php7.3-xml php7.3-mysql php7.3-opcache php7.3-readline php7.3-mbstring \
php-redis php-gnupg \
php-gd
else
sudo apt install -qy \
libapache2-mod-php7.3 \
libgpgme-dev \
php7.3 php7.3-cli \
php7.3-dev \
php7.3-json php7.3-xml php7.3-mysql php7.3-opcache php7.3-readline php7.3-mbstring \
php7.3-gd
sudo pecl channel-update pecl.php.net
#sudo pear config-set php_ini ${PHP_INI}
echo "" | sudo pecl install redis
sudo pecl install gnupg
echo extension = gnupg.so | sudo tee ${ PHP_ETC_BASE } /mods-available/gnupg.ini
echo extension = redis.so | sudo tee ${ PHP_ETC_BASE } /mods-available/redis.ini
fi
}
# Installing core dependencies
installDeps ( ) {
debug "Installing core dependencies"
checkAptLock
sudo apt install -qy etckeeper
# Skip dist-upgrade for now, pulls in 500+ updated packages
#sudo apt -y dist-upgrade
gitMail = $( git config --global --get user.email ; echo $? )
if [ " $? " -eq "1" ] ; then
git config --global user.email "root@kali.lan"
fi
gitUser = $( git config --global --get user.name ; echo $? )
if [ " $? " -eq "1" ] ; then
git config --global user.name "Root User"
fi
[ [ -n $KALI ] ] || [ [ -n $UNATTENDED ] ] && sudo DEBIAN_FRONTEND = noninteractive apt install -qy postfix || sudo apt install -qy postfix
sudo apt install -qy \
curl gcc git gnupg-agent make openssl redis-server neovim unzip zip libyara-dev python3-yara python3-redis python3-zmq sqlite3 \
mariadb-client \
mariadb-server \
apache2 apache2-doc apache2-utils \
python3-dev python3-pip libpq5 libjpeg-dev libfuzzy-dev ruby asciidoctor \
libxml2-dev libxslt1-dev zlib1g-dev python3-setuptools
installRNG
}
# On Kali, the redis start-up script is broken. This tries to fix it.
fixRedis ( ) {
# As of 20190124 redis-server init.d scripts are broken and need to be replaced
sudo mv /etc/init.d/redis-server /etc/init.d/redis-server_` date +%Y%m%d`
echo ' #! /bin/sh
### BEGIN INIT INFO
# Provides: redis-server
# Required-Start: $syslog
# Required-Stop: $syslog
# Should-Start: $local_fs
# Should-Stop: $local_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: redis-server - Persistent key-value db
# Description: redis-server - Persistent key-value db
### END INIT INFO
PATH = /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON = /usr/bin/redis-server
DAEMON_ARGS = /etc/redis/redis.conf
NAME = redis-server
DESC = redis-server
PIDFILE = /var/run/redis.pid
test -x $DAEMON || exit 0
test -x $DAEMONBOOTSTRAP || exit 0
set -e
case " $1 " in
start)
echo -n " Starting $DESC : "
touch $PIDFILE
chown redis:redis $PIDFILE
if start-stop-daemon --start --quiet --umask 007 --pidfile $PIDFILE --chuid redis:redis --exec $DAEMON -- $DAEMON_ARGS
then
echo " $NAME . "
else
echo "failed"
fi
; ;
stop)
echo -n " Stopping $DESC : "
if start-stop-daemon --stop --retry 10 --quiet --oknodo --pidfile $PIDFILE --exec $DAEMON
then
echo " $NAME . "
else
echo "failed"
fi
rm -f $PIDFILE
; ;
restart| force-reload)
${ 0 } stop
${ 0 } start
; ;
*)
echo " Usage: /etc/init.d/ $NAME {start|stop|restart|force-reload} " >& 2
exit 1
; ;
esac
exit 0' | sudo tee /etc/init.d/redis-server
sudo chmod 755 /etc/init.d/redis-server
sudo /etc/init.d/redis-server start
}
# generate MISP apache conf
genApacheConf ( ) {
echo " <VirtualHost _default_:80>
ServerAdmin admin@localhost.lu
ServerName misp.local
Redirect permanent / https://misp.local
LogLevel warn
ErrorLog /var/log/apache2/misp.local_error.log
CustomLog /var/log/apache2/misp.local_access.log combined
ServerSignature Off
</VirtualHost>
<VirtualHost _default_:443>
ServerAdmin admin@localhost.lu
ServerName misp.local
DocumentRoot $PATH_TO_MISP /app/webroot
<Directory $PATH_TO_MISP /app/webroot>
Options -Indexes
AllowOverride all
Require all granted
Order allow,deny
allow from all
</Directory>
SSLEngine On
SSLCertificateFile /etc/ssl/private/misp.local.crt
SSLCertificateKeyFile /etc/ssl/private/misp.local.key
# SSLCertificateChainFile /etc/ssl/private/misp-chain.crt
LogLevel warn
ErrorLog /var/log/apache2/misp.local_error.log
CustomLog /var/log/apache2/misp.local_access.log combined
ServerSignature Off
Header set X-Content-Type-Options nosniff
Header set X-Frame-Options DENY
</VirtualHost>" | sudo tee /etc/apache2/sites-available/misp-ssl.conf
}
# Add git pull update mechanism to rc.local - TODO: Make this better
gitPullAllRCLOCAL ( ) {
sudo sed -i -e '$i \git_dirs="/usr/local/src/misp-modules /var/www/misp-dashboard /usr/local/src/faup /usr/local/src/mail_to_misp /usr/local/src/misp-modules /usr/local/src/viper /var/www/misp-dashboard"\n' /etc/rc.local
sudo sed -i -e '$i \for d in $git_dirs; do\n' /etc/rc.local
sudo sed -i -e '$i \ echo "Updating ${d}"\n' /etc/rc.local
sudo sed -i -e '$i \ cd $d && sudo git pull &\n' /etc/rc.local
sudo sed -i -e '$i \done\n' /etc/rc.local
}
# Main composer function
composer ( ) {
sudo mkdir -p /var/www/.composer ; sudo chown ${ WWW_USER } :${ WWW_USER } /var/www/.composer
${ SUDO_WWW } sh -c " cd ${ PATH_TO_MISP } /app ; php composer.phar install "
}
# TODO: FIX somehow the alias of the function does not work
# Composer on php 7.0 does not need any special treatment the provided phar works well
alias composer70 = composer
# Composer on php 7.2 does not need any special treatment the provided phar works well
alias composer72 = composer
# Composer on php 7.3 does not need any special treatment the provided phar works well
alias composer73 = composer
# TODO: this is probably a useless function
# Enable various core services
enableServices ( ) {
sudo systemctl daemon-reload
sudo systemctl enable --now mysql
sudo systemctl enable --now apache2
sudo systemctl enable --now redis-server
}
# TODO: check if this makes sense
# Generate rc.local
genRCLOCAL ( ) {
if [ [ ! -e /etc/rc.local ] ] ; then
echo '#!/bin/sh -e' | tee -a /etc/rc.local
echo 'exit 0' | sudo tee -a /etc/rc.local
chmod u+x /etc/rc.local
fi
sudo sed -i -e '$i \echo never > /sys/kernel/mm/transparent_hugepage/enabled\n' /etc/rc.local
sudo sed -i -e '$i \echo 1024 > /proc/sys/net/core/somaxconn\n' /etc/rc.local
sudo sed -i -e '$i \sysctl vm.overcommit_memory=1\n' /etc/rc.local
sudo sed -i -e '$i \[ -f /etc/init.d/firstBoot ] && bash /etc/init.d/firstBoot\n' /etc/rc.local
}
# Run PyMISP tests
runTests ( ) {
echo " url = \" ${ MISP_BASEURL } \"
key = \" ${ AUTH_KEY } \" " |sudo tee ${ PATH_TO_MISP } /PyMISP/tests/keys.py
sudo chown -R $WWW_USER :$WWW_USER $PATH_TO_MISP /PyMISP/
${ SUDO_WWW } sh -c " cd $PATH_TO_MISP /PyMISP && git submodule foreach git pull origin master "
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install -e $PATH_TO_MISP /PyMISP/.[ fileobjects,neo,openioc,virustotal,pdfexport]
${ SUDO_WWW } sh -c " cd $PATH_TO_MISP /PyMISP && ${ PATH_TO_MISP } /venv/bin/python tests/testlive_comprehensive.py "
}
# Nuke the install, meaning remove all MISP data but no packages, this makes testing the installer faster
nuke ( ) {
echo -e " ${ RED } YOU ARE ABOUT TO DELETE ALL MISP DATA! Sleeping 10, 9, 8... ${ NC } "
sleep 10
sudo rm -rvf /usr/local/src/{ misp-modules,viper,mail_to_misp,LIEF,faup}
sudo rm -rvf /var/www/MISP
sudo mysqladmin -h $DBHOST drop misp
sudo mysql -h $DBHOST -e "DROP USER misp@localhost"
}
# Final function to let the user know what happened
theEnd ( ) {
space
echo " Admin (root) DB Password: $DBPASSWORD_ADMIN " | $SUDO_CMD tee /home/${ MISP_USER } /mysql.txt
echo " User (misp) DB Password: $DBPASSWORD_MISP " | $SUDO_CMD tee -a /home/${ MISP_USER } /mysql.txt
echo " Authkey: $AUTH_KEY " | $SUDO_CMD tee -a /home/${ MISP_USER } /MISP-authkey.txt
# Commenting out, see: https://github.com/MISP/MISP/issues/5368
# clear -x
space
echo -e " ${ LBLUE } MISP ${ NC } Installed, access here: ${ MISP_BASEURL } "
echo
echo "User: admin@admin.test"
echo "Password: admin"
space
##[[ -n $KALI ]] || [[ -n $DASHBOARD ]] || [[ -n $ALL ]] && echo -e "${LBLUE}MISP${NC} Dashboard, access here: ${MISP_BASEURL}:8001"
##[[ -n $KALI ]] || [[ -n $DASHBOARD ]] || [[ -n $ALL ]] && space
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && echo -e "viper-web installed, access here: ${MISP_BASEURL}:8888"
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && echo -e "viper-cli configured with your ${LBLUE}MISP${NC} ${RED}Site Admin Auth Key${NC}"
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && echo
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && echo "User: admin"
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && echo "Password: Password1234"
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && space
echo -e " The following files were created and need either ${ RED } protection or removal ${ NC } ( ${ YELLOW } shred ${ NC } on the CLI) "
echo " /home/ ${ MISP_USER } /mysql.txt "
echo -e " ${ RED } Contents: ${ NC } "
cat /home/${ MISP_USER } /mysql.txt
echo " /home/ ${ MISP_USER } /MISP-authkey.txt "
echo -e " ${ RED } Contents: ${ NC } "
cat /home/${ MISP_USER } /MISP-authkey.txt
space
echo -e " The ${ RED } LOCAL ${ NC } system credentials: "
echo " User: ${ MISP_USER } "
echo " Password: ${ MISP_PASSWORD } # Or the password you used of your custom user "
space
echo " GnuPG Passphrase is: ${ GPG_PASSPHRASE } "
space
echo "To enable outgoing mails via postfix set a permissive SMTP server for the domains you want to contact:"
echo
echo "sudo postconf -e 'relayhost = example.com'"
echo "sudo postfix reload"
space
echo -e " Enjoy using ${ LBLUE } MISP ${ NC } . For any issues see here: https://github.com/MISP/MISP/issues "
space
if [ [ " $UNATTENDED " = = "1" ] ] ; then
echo -e " ${ RED } Unattended install! ${ NC } "
echo -e "This means we guessed the Base URL, it might be wrong, please double check."
space
fi
if [ [ " $PACKER " = = "1" ] ] ; then
echo -e " ${ RED } This was an Automated Packer install! ${ NC } "
echo -e "This means we forced an unattended install."
space
fi
if [ [ " $USER " != " $MISP_USER " && " $UNATTENDED " != "1" ] ] ; then
sudo su - ${ MISP_USER }
fi
}
## End Function Section Nothing allowed in .md after this line ##
aptUpgrade ( ) {
debug "Upgrading system"
checkAptLock
# If we run in non-interactive mode, make sure we do not stop all of a sudden
if [ [ " ${ PACKER } " = = "1" || " ${ UNATTENDED } " = = "1" ] ] ; then
export DEBIAN_FRONTEND = noninteractive
export DEBIAN_PRIORITY = critical
sudo -E apt-get -qy -o "Dpkg::Options::=--force-confdef" -o "Dpkg::Options::=--force-confold" upgrade
sudo -E apt-get -qy autoclean
else
sudo apt-get upgrade -qy
fi
}
# check if sudo is installed
checkSudoKeeper ( ) {
echo "Checking for sudo and installing etckeeper"
if [ [ ! -f $( which sudo) ] ] ; then
echo "Please enter your root password below to install etckeeper"
su -c "apt install etckeeper -y"
echo "Please enter your root password below to install sudo"
su -c "apt install sudo -y"
echo "Please enter your root password below to install sudo"
su -c "apt install curl -y"
echo " Please enter your root password below to add ${ MISP_USER } to sudo group "
su -c " /usr/sbin/adduser ${ MISP_USER } sudo "
echo " We added ${ MISP_USER } to group sudo and now we need to log out and in again. "
exit
else
sudo apt update
sudo apt install etckeeper -y
fi
}
installCoreDeps ( ) {
debug "Installing core dependencies"
# Install the dependencies: (some might already be installed)
sudo apt-get install curl gcc git gpg-agent make python python3 openssl redis-server sudo vim zip unzip virtualenv libfuzzy-dev sqlite3 moreutils -qy
# Install MariaDB (a MySQL fork/alternative)
sudo apt-get install mariadb-client mariadb-server -qy
# Install Apache2
sudo apt-get install apache2 apache2-doc apache2-utils -qy
# install Mitre's STIX and its dependencies by running the following commands:
sudo apt-get install python3-dev python3-pip libxml2-dev libxslt1-dev zlib1g-dev python-setuptools -qy
}
# Install Php 7.4 dependencies
installDepsPhp74 ( ) {
debug "Installing PHP 7.4 dependencies"
PHP_ETC_BASE = /etc/php/7.4
PHP_INI = ${ PHP_ETC_BASE } /apache2/php.ini
checkAptLock
sudo apt install -qy \
libapache2-mod-php \
php php-cli \
php-dev \
php-json php-xml php-mysql php7.4-opcache php-readline php-mbstring php-zip \
php-redis php-gnupg \
php-intl php-bcmath \
php-gd
for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
do
sudo sed -i " s/^\( $key \).*/\1 = $( eval echo \$ { $key } ) / " $PHP_INI
done
}
# Install Php 7.3 deps
installDepsPhp73 ( ) {
debug "Installing PHP 7.3 dependencies"
PHP_ETC_BASE = /etc/php/7.3
PHP_INI = ${ PHP_ETC_BASE } /apache2/php.ini
checkAptLock
if [ [ ! -n ${ KALI } ] ] ; then
sudo apt install -qy \
libapache2-mod-php7.3 \
php7.3 php7.3-cli \
php7.3-dev \
php7.3-json php7.3-xml php7.3-mysql php7.3-opcache php7.3-readline php7.3-mbstring \
php-redis php-gnupg \
php-gd
else
sudo apt install -qy \
libapache2-mod-php7.3 \
libgpgme-dev \
php7.3 php7.3-cli \
php7.3-dev \
php7.3-json php7.3-xml php7.3-mysql php7.3-opcache php7.3-readline php7.3-mbstring \
php7.3-gd
sudo pecl channel-update pecl.php.net
#sudo pear config-set php_ini ${PHP_INI}
echo "" | sudo pecl install redis
sudo pecl install gnupg
echo extension = gnupg.so | sudo tee ${ PHP_ETC_BASE } /mods-available/gnupg.ini
echo extension = redis.so | sudo tee ${ PHP_ETC_BASE } /mods-available/redis.ini
fi
}
# Install Php 7.2 dependencies
installDepsPhp72 ( ) {
debug "Installing PHP 7.2 dependencies"
PHP_ETC_BASE = /etc/php/7.2
PHP_INI = ${ PHP_ETC_BASE } /apache2/php.ini
checkAptLock
sudo apt install -qy \
libapache2-mod-php \
php php-cli \
php-dev \
php-json php-xml php-mysql php7.2-opcache php-readline php-mbstring php-zip \
php-redis php-gnupg \
php-intl php-bcmath \
php-gd
for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
do
sudo sed -i " s/^\( $key \).*/\1 = $( eval echo \$ { $key } ) / " $PHP_INI
done
}
# Install Php 7.0 dependencies
installDepsPhp70 ( ) {
debug "Installing PHP 7.0 dependencies"
PHP_ETC_BASE = /etc/php/7.0
PHP_INI = ${ PHP_ETC_BASE } /apache2/php.ini
checkAptLock
sudo apt install -qy \
libapache2-mod-php \
php php-cli \
php-dev \
php-json php-xml php-mysql php-opcache php-readline php-mbstring php-zip \
php-redis php-gnupg \
php-gd
for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
do
sudo sed -i " s/^\( $key \).*/\1 = $( eval echo \$ { $key } ) / " $PHP_INI
done
}
## 1_prepareDB.sh ##
apacheConfig ( ) {
debug "Generating Apache config, if this hangs, make sure you have enough entropy (install: haveged or wait)"
sudo cp ${ PATH_TO_MISP } /INSTALL/apache.24.misp.ssl /etc/apache2/sites-available/misp-ssl.conf
if [ [ ! -z ${ MISP_BASEURL } ] ] && [ [ " $( echo $MISP_BASEURL | cut -f 1 -d :) " = = "http" || " $( echo $MISP_BASEURL | cut -f 1 -d :) " = = "https" ] ] ; then
echo " Potentially replacing misp.local with $MISP_BASEURL in misp-ssl.conf "
fi
# If a valid SSL certificate is not already created for the server,
# create a self-signed certificate:
sudo openssl req -newkey rsa:4096 -days 365 -nodes -x509 \
-subj " /C= ${ OPENSSL_C } /ST= ${ OPENSSL_ST } /L= ${ OPENSSL_L } /O= ${ OPENSSL_O } /OU= ${ OPENSSL_OU } /CN= ${ OPENSSL_CN } /emailAddress= ${ OPENSSL_EMAILADDRESS } " \
-keyout /etc/ssl/private/misp.local.key -out /etc/ssl/private/misp.local.crt
# Enable modules, settings, and default of SSL in Apache
sudo a2dismod status
sudo a2enmod ssl
sudo a2enmod rewrite
sudo a2enmod headers
sudo a2dissite 000-default
sudo a2ensite default-ssl
# Apply all changes
sudo systemctl restart apache2
# activate new vhost
sudo a2dissite default-ssl
sudo a2ensite misp-ssl
# Restart apache
sudo systemctl restart apache2
}
installCore ( ) {
debug " Installing ${ LBLUE } MISP ${ NC } core "
# Download MISP using git in the /var/www/ directory.
if [ [ ! -d ${ PATH_TO_MISP } ] ] ; then
sudo mkdir ${ PATH_TO_MISP }
sudo chown ${ WWW_USER } :${ WWW_USER } ${ PATH_TO_MISP }
false; while [ [ $? -ne 0 ] ] ; do checkAptLock; ${ SUDO_WWW } git clone https://github.com/MISP/MISP.git ${ PATH_TO_MISP } ; done
false; while [ [ $? -ne 0 ] ] ; do checkAptLock; ${ SUDO_WWW } git -C ${ PATH_TO_MISP } submodule update --progress --init --recursive; done
# Make git ignore filesystem permission differences for submodules
${ SUDO_WWW } git -C ${ PATH_TO_MISP } submodule foreach --recursive git config core.filemode false
# Make git ignore filesystem permission differences
${ SUDO_WWW } git -C ${ PATH_TO_MISP } config core.filemode false
# Create a python3 virtualenv
${ SUDO_WWW } virtualenv -p python3 ${ PATH_TO_MISP } /venv
# make pip happy
sudo mkdir /var/www/.cache/
sudo chown ${ WWW_USER } :${ WWW_USER } /var/www/.cache
for dependency in CybOXProject/python-cybox STIXProject/python-stix MAECProject/python-maec CybOXProject/mixbox; do
false; while [ [ $? -ne 0 ] ] ; do checkAptLock; ${ SUDO_WWW } git clone https://github.com/${ dependency } .git ${ PATH_TO_MISP_SCRIPTS } /${ dependency ##*/ } ; done
${ SUDO_WWW } git -C ${ PATH_TO_MISP_SCRIPTS } /${ dependency ##*/ } config core.filemode false
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install ${ PATH_TO_MISP_SCRIPTS } /${ dependency ##*/ }
done
debug "Install python-stix2"
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install ${ PATH_TO_MISP } /cti-python-stix2
debug "Install PyMISP"
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install ${ PATH_TO_MISP } /PyMISP
# FIXME: Remove libfaup etc once the egg has the library baked-in
sudo apt-get install cmake libcaca-dev liblua5.3-dev -y
cd /tmp
false; while [ [ $? -ne 0 ] ] ; do [ [ ! -d "faup" ] ] && ${ SUDO_CMD } git clone https://github.com/stricaud/faup.git faup; done
false; while [ [ $? -ne 0 ] ] ; do [ [ ! -d "gtcaca" ] ] && ${ SUDO_CMD } git clone https://github.com/stricaud/gtcaca.git gtcaca; done
sudo chown -R ${ MISP_USER } :${ MISP_USER } faup gtcaca
cd gtcaca
${ SUDO_CMD } mkdir -p build
cd build
${ SUDO_CMD } cmake .. && ${ SUDO_CMD } make
sudo make install
cd ../../faup
${ SUDO_CMD } mkdir -p build
cd build
${ SUDO_CMD } cmake .. && ${ SUDO_CMD } make
sudo make install
sudo ldconfig
# install pydeep
false; while [ [ $? -ne 0 ] ] ; do checkAptLock; ${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install git+https://github.com/kbandla/pydeep.git; done
# install lief
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install lief
# install zmq needed by mispzmq
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install zmq redis
# install python-magic
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install python-magic
# install plyara
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install plyara
else
debug "Trying to git pull existing install"
${ SUDO_WWW } git pull -C ${ PATH_TO_MISP }
false; while [ [ $? -ne 0 ] ] ; do ${ SUDO_WWW } git -C ${ PATH_TO_MISP } submodule update --progress --init --recursive; done
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install -U setuptools pip lief zmq redis python-magic plyara
for dependency in CybOXProject/python-cybox STIXProject/python-stix MAECProject/python-maec CybOXProject/mixbox; do
false; while [ [ $? -ne 0 ] ] ; do checkAptLock; ${ SUDO_WWW } git -C ${ PATH_TO_MISP_SCRIPTS } /${ dependency ##*/ } pull; done
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install -U ${ PATH_TO_MISP_SCRIPTS } /${ dependency ##*/ }
done
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install -U ${ PATH_TO_MISP } /cti-python-stix2
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install -U ${ PATH_TO_MISP } /PyMISP
false; while [ [ $? -ne 0 ] ] ; do checkAptLock; ${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install -U git+https://github.com/kbandla/pydeep.git; done
fi
}
installCake ( ) {
debug "Installing CakePHP"
# Make composer cache happy
# /!\ composer on Ubuntu when invoked with sudo -u doesn't set $HOME to /var/www but keeps it /home/misp \!/
sudo mkdir -p /var/www/.composer ; sudo chown ${ WWW_USER } :${ WWW_USER } /var/www/.composer
${ SUDO_WWW } sh -c " cd ${ PATH_TO_MISP } /app ;php composer.phar install "
# Enable CakeResque with php-redis
sudo phpenmod redis
sudo phpenmod gnupg
# To use the scheduler worker for scheduled tasks, do the following:
${ SUDO_WWW } cp -fa ${ PATH_TO_MISP } /INSTALL/setup/config.php ${ PATH_TO_MISP } /app/Plugin/CakeResque/Config/config.php
# If you have multiple MISP instances on the same system, don't forget to have a different Redis per MISP instance for the CakeResque workers
# The default Redis port can be updated in Plugin/CakeResque/Config/config.php
}
# Main function to fix permissions to something sane
permissions ( ) {
debug "Setting permissions"
sudo chown -R ${ WWW_USER } :${ WWW_USER } ${ PATH_TO_MISP }
sudo chmod -R 750 ${ PATH_TO_MISP }
sudo chmod -R g+ws ${ PATH_TO_MISP } /app/tmp
sudo chmod -R g+ws ${ PATH_TO_MISP } /app/files
sudo chmod -R g+ws ${ PATH_TO_MISP } /app/files/scripts/tmp
}
configMISP ( ) {
debug " Generating ${ LBLUE } MISP ${ NC } config files "
# There are 4 sample configuration files in ${PATH_TO_MISP}/app/Config that need to be copied
${ SUDO_WWW } cp -a ${ PATH_TO_MISP } /app/Config/bootstrap.default.php ${ PATH_TO_MISP } /app/Config/bootstrap.php
${ SUDO_WWW } cp -a ${ PATH_TO_MISP } /app/Config/database.default.php ${ PATH_TO_MISP } /app/Config/database.php
${ SUDO_WWW } cp -a ${ PATH_TO_MISP } /app/Config/core.default.php ${ PATH_TO_MISP } /app/Config/core.php
${ SUDO_WWW } cp -a ${ PATH_TO_MISP } /app/Config/config.default.php ${ PATH_TO_MISP } /app/Config/config.php
echo " <?php
class DATABASE_CONFIG {
public \$ default = array(
'datasource' = > 'Database/Mysql' ,
//'datasource' = > 'Database/Postgres' ,
'persistent' = > false,
'host' = > '$DBHOST' ,
'login' = > '$DBUSER_MISP' ,
'port' = > 3306, // MySQL & MariaDB
//'port' = > 5432, // PostgreSQL
'password' = > '$DBPASSWORD_MISP' ,
'database' = > '$DBNAME' ,
'prefix' = > '' ,
'encoding' = > 'utf8' ,
) ;
} " | ${ SUDO_WWW } tee ${ PATH_TO_MISP } /app/Config/database.php
# Important! Change the salt key in ${PATH_TO_MISP}/app/Config/config.php
# The salt key must be a string at least 32 bytes long.
# The admin user account will be generated on the first login, make sure that the salt is changed before you create that user
# If you forget to do this step, and you are still dealing with a fresh installation, just alter the salt,
# delete the user from mysql and log in again using the default admin credentials (admin@admin.test / admin)
# and make sure the file permissions are still OK
sudo chown -R ${ WWW_USER } :${ WWW_USER } ${ PATH_TO_MISP } /app/Config
sudo chmod -R 750 ${ PATH_TO_MISP } /app/Config
}
# Core cake commands to tweak MISP and aleviate some of the configuration pains
# The $RUN_PHP is ONLY set on RHEL/CentOS installs and can thus be ignored
# This file is NOT an excuse to NOT read the settings and familiarize ourselves with them ;)
coreCAKE ( ) {
debug " Running core Cake commands to set sane defaults for ${ LBLUE } MISP ${ NC } "
# IF you have logged in prior to running this, it will fail but the fail is NON-blocking
$SUDO_WWW $RUN_PHP -- $CAKE userInit -q
# This makes sure all Database upgrades are done, without logging in.
$SUDO_WWW $RUN_PHP -- $CAKE Admin runUpdates
# The default install is Python >=3.6 in a virtualenv, setting accordingly
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.python_bin" " ${ PATH_TO_MISP } /venv/bin/python "
# Set default role
# TESTME: The following seem defunct, please test.
# $SUDO_WWW $RUN_PHP -- $CAKE setDefaultRole 3
# Tune global time outs
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Session.autoRegenerate" 0
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Session.timeout" 600
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Session.cookieTimeout" 3600
# Change base url, either with this CLI command or in the UI
$SUDO_WWW $RUN_PHP -- $CAKE Baseurl $MISP_BASEURL
# example: 'baseurl' => 'https://<your.FQDN.here>',
# alternatively, you can leave this field empty if you would like to use relative pathing in MISP
# 'baseurl' => '',
# The base url of the application (in the format https://www.mymispinstance.com) as visible externally/by other MISPs.
# MISP will encode this URL in sharing groups when including itself. If this value is not set, the baseurl is used as a fallback.
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.external_baseurl" $MISP_BASEURL
# Enable GnuPG
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "GnuPG.email" " $GPG_EMAIL_ADDRESS "
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "GnuPG.homedir" " $PATH_TO_MISP /.gnupg "
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "GnuPG.password" " $GPG_PASSPHRASE "
# FIXME: what if we have not gpg binary but a gpg2 one?
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "GnuPG.binary" " $( which gpg) "
# Enable installer org and tune some configurables
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.host_org_id" 1
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.email" "info@admin.test"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.disable_emailing" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.contact" "info@admin.test"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.disablerestalert" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.showCorrelationsOnIndex" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.default_event_tag_collection" 0
# Provisional Cortex tunes
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Cortex_services_enable" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Cortex_services_url" "http://127.0.0.1"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Cortex_services_port" 9000
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Cortex_timeout" 120
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Cortex_authkey" ""
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Cortex_ssl_verify_peer" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Cortex_ssl_verify_host" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Cortex_ssl_allow_self_signed" true
# Various plugin sightings settings
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Sightings_policy" 0
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Sightings_anonymise" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Sightings_anonymise_as" 1
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Sightings_range" 365
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Sightings_sighting_db_enable" false
# Plugin CustomAuth tuneable
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.CustomAuth_disable_logout" false
# RPZ Plugin settings
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_policy" "DROP"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_walled_garden" "127.0.0.1"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_serial" "\$date00"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_refresh" "2h"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_retry" "30m"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_expiry" "30d"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_minimum_ttl" "1h"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_ttl" "1w"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_ns" "localhost."
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_ns_alt" ""
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.RPZ_email" "root.localhost"
# Force defaults to make MISP Server Settings less RED
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.language" "eng"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.proposals_block_attributes" false
# Redis block
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.redis_host" "127.0.0.1"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.redis_port" 6379
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.redis_database" 13
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.redis_password" ""
# Force defaults to make MISP Server Settings less YELLOW
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.ssdeep_correlation_threshold" 40
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.extended_alert_subject" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.default_event_threat_level" 4
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.newUserText" "Dear new MISP user,\\n\\nWe would hereby like to welcome you to the \$org MISP community.\\n\\n Use the credentials below to log into MISP at \$misp, where you will be prompted to manually change your password to something of your own choice.\\n\\nUsername: \$username\\nPassword: \$password\\n\\nIf you have any questions, don't hesitate to contact us at: \$contact.\\n\\nBest regards,\\nYour \$org MISP support team"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.passwordResetText" "Dear MISP user,\\n\\nA password reset has been triggered for your account. Use the below provided temporary password to log into MISP at \$misp, where you will be prompted to manually change your password to something of your own choice.\\n\\nUsername: \$username\\nYour temporary password: \$password\\n\\nIf you have any questions, don't hesitate to contact us at: \$contact.\\n\\nBest regards,\\nYour \$org MISP support team"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.enableEventBlocklisting" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.enableOrgBlocklisting" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.log_client_ip" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.log_auth" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.disableUserSelfManagement" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.disable_user_login_change" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.disable_user_password_change" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.disable_user_add" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.block_event_alert" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.block_event_alert_tag" "no-alerts=\"true\""
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.block_old_event_alert" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.block_old_event_alert_age" ""
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.block_old_event_alert_by_date" ""
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.incoming_tags_disabled_by_default" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.maintenance_message" "Great things are happening! MISP is undergoing maintenance, but will return shortly. You can contact the administration at \$email."
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.footermidleft" "This is an initial install"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.footermidright" "Please configure and harden accordingly"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.welcome_text_top" "Initial Install, please configure"
# TODO: Make sure $FLAVOUR is correct
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.welcome_text_bottom" " Welcome to MISP on $FLAVOUR , change this message in MISP Settings "
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.attachments_dir" " $PATH_TO_MISP /app/files "
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.download_attachments_on_load" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.title_text" "MISP"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.terms_download" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.showorgalternate" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "MISP.event_view_filter_fields" "id, uuid, value, comment, type, category, Tag.name"
# Force defaults to make MISP Server Settings less GREEN
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "debug" 0
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Security.auth_enforced" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Security.rest_client_baseurl" ""
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Security.advanced_authkeys" false
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Security.password_policy_length" 12
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Security.password_policy_complexity" '/^((?=.*\d)|(?=.*\W+))(?![\n])(?=.*[A-Z])(?=.*[a-z]).*$|.{16,}/'
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Security.self_registration_message" "If you would like to send us a registration request, please fill out the form below. Make sure you fill out as much information as possible in order to ease the task of the administrators."
# It is possible to updateMISP too, only here for reference how to to that on the CLI.
## $SUDO_WWW $RUN_PHP -- $CAKE Admin updateMISP
# Set MISP Live
$SUDO_WWW $RUN_PHP -- $CAKE Live $MISP_LIVE
}
# This updates Galaxies, ObjectTemplates, Warninglists, Noticelists, Templates
updateGOWNT ( ) {
# AUTH_KEY Place holder in case we need to **curl** somehing in the future
#
$SUDO_WWW $RUN_MYSQL -- mysql -h $DBHOST -u $DBUSER_MISP -p$DBPASSWORD_MISP misp -e "SELECT authkey FROM users;" | tail -1 > /tmp/auth.key
AUTH_KEY = $( cat /tmp/auth.key)
rm /tmp/auth.key
debug "Updating Galaxies, ObjectTemplates, Warninglists, Noticelists and Templates"
# Update the galaxies…
# TODO: Fix updateGalaxies
$SUDO_WWW $RUN_PHP -- $CAKE Admin updateGalaxies
# Updating the taxonomies…
$SUDO_WWW $RUN_PHP -- $CAKE Admin updateTaxonomies
# Updating the warning lists…
$SUDO_WWW $RUN_PHP -- $CAKE Admin updateWarningLists
# Updating the notice lists…
$SUDO_WWW $RUN_PHP -- $CAKE Admin updateNoticeLists
# Updating the object templates…
$SUDO_WWW $RUN_PHP -- $CAKE Admin updateObjectTemplates "1337"
}
# Generate GnuPG key
setupGnuPG ( ) {
if [ ! -d $PATH_TO_MISP /.gnupg ] ; then
# The email address should match the one set in the config.php
# set in the configuration menu in the administration menu configuration file
echo " %echo Generating a default key
Key-Type: default
Key-Length: $GPG_KEY_LENGTH
Subkey-Type: default
Name-Real: $GPG_REAL_NAME
Name-Comment: $GPG_COMMENT
Name-Email: $GPG_EMAIL_ADDRESS
Expire-Date: 0
Passphrase: $GPG_PASSPHRASE
# Do a commit here, so that we can later print "done"
%commit
%echo done " > /tmp/gen-key-script
$SUDO_WWW gpg --homedir $PATH_TO_MISP /.gnupg --batch --gen-key /tmp/gen-key-script
# Export the public key to the webroot
$SUDO_WWW sh -c " gpg --homedir $PATH_TO_MISP /.gnupg --export --armor $GPG_EMAIL_ADDRESS " | $SUDO_WWW tee $PATH_TO_MISP /app/webroot/gpg.asc
fi
}
logRotation ( ) {
# MISP saves the stdout and stderr of its workers in ${PATH_TO_MISP}/app/tmp/logs
# To rotate these logs install the supplied logrotate script:
sudo cp ${ PATH_TO_MISP } /INSTALL/misp.logrotate /etc/logrotate.d/misp
sudo chmod 0640 /etc/logrotate.d/misp
}
backgroundWorkers ( ) {
debug "Setting up background workers"
# To make the background workers start on boot
sudo chmod +x ${ PATH_TO_MISP } /app/Console/worker/start.sh
if [ ! -e /etc/rc.local ]
then
echo '#!/bin/sh -e' | sudo tee -a /etc/rc.local
echo 'exit 0' | sudo tee -a /etc/rc.local
sudo chmod u+x /etc/rc.local
fi
echo " [Unit]
Description = MISP background workers
After = network.target
[ Service]
Type = forking
User = ${ WWW_USER }
Group = ${ WWW_USER }
ExecStart = ${ PATH_TO_MISP } /app/Console/worker/start.sh
Restart = always
RestartSec = 10
[ Install]
WantedBy = multi-user.target" | sudo tee /etc/systemd/system/misp-workers.service
sudo systemctl daemon-reload
sudo systemctl enable --now misp-workers
# Add the following lines before the last line (exit 0). Make sure that you replace www-data with your apache user:
sudo sed -i -e '$i \echo never > /sys/kernel/mm/transparent_hugepage/enabled\n' /etc/rc.local
sudo sed -i -e '$i \echo 1024 > /proc/sys/net/core/somaxconn\n' /etc/rc.local
sudo sed -i -e '$i \sysctl vm.overcommit_memory=1\n' /etc/rc.local
}
# Main MISP Modules install function
mispmodules ( ) {
cd /usr/local/src/
sudo apt-get install cmake libcaca-dev liblua5.3-dev -y
## TODO: checkUsrLocalSrc in main doc
if [ [ ! -d /usr/local/src/misp-modules ] ] ; then
debug "Cloning misp-modules"
false; while [ [ $? -ne 0 ] ] ; do $SUDO_CMD git clone https://github.com/MISP/misp-modules.git; done
else
false; while [ [ $? -ne 0 ] ] ; do $SUDO_CMD git -C /usr/local/src/misp-modules pull; done
fi
# Install faup/gtcaca
[ [ ! -d "faup" ] ] && false; while [ [ $? -ne 0 ] ] ; do $SUDO_CMD git clone https://github.com/stricaud/faup.git faup; done
[ [ ! -d "gtcaca" ] ] && false; while [ [ $? -ne 0 ] ] ; do $SUDO_CMD git clone https://github.com/stricaud/gtcaca.git gtcaca; done
sudo chown -R ${ MISP_USER } :${ MISP_USER } faup gtcaca
# Install gtcaca
cd gtcaca
$SUDO_CMD mkdir -p build
cd build
$SUDO_CMD cmake .. && $SUDO_CMD make
sudo make install
cd /usr/local/src/faup
# Install faup
$SUDO_CMD mkdir -p build
cd build
$SUDO_CMD cmake .. && $SUDO_CMD make
sudo make install
sudo ldconfig
cd /usr/local/src/misp-modules
# some misp-modules dependencies
sudo apt install libpq5 libjpeg-dev tesseract-ocr libpoppler-cpp-dev imagemagick libopencv-dev zbar-tools libzbar0 libzbar-dev libfuzzy-dev -y
# If you build an egg, the user you build it as need write permissions in the CWD
sudo chgrp $WWW_USER .
sudo chmod og+w .
$SUDO_WWW ${ PATH_TO_MISP } /venv/bin/pip install -I -r REQUIREMENTS
sudo chgrp staff .
$SUDO_WWW ${ PATH_TO_MISP } /venv/bin/pip install -I .
$SUDO_WWW ${ PATH_TO_MISP } /venv/bin/pip install censys pyfaup
# Start misp-modules as a service
sudo cp /usr/local/src/misp-modules/etc/systemd/system/misp-modules.service /etc/systemd/system/
sudo systemctl daemon-reload
sudo systemctl enable --now misp-modules
# Sleep 9 seconds to give misp-modules a chance to spawn
sleep 9
# Enable Enrichment, set better timeouts
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_services_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_hover_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_hover_popover_only" false
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_timeout" 300
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_hover_timeout" 150
# TODO:"Investigate why the next one fails"
#$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_asn_history_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_cve_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_dns_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_btc_steroids_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_ipasn_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_yara_syntax_validator_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_yara_query_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_pdf_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_docx_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_xlsx_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_pptx_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_ods_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_odt_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_services_url" "http://127.0.0.1"
$SUDO_WWW $CAKE Admin setSetting "Plugin.Enrichment_services_port" 6666
# Enable Import modules, set better timeout
$SUDO_WWW $CAKE Admin setSetting "Plugin.Import_services_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Import_services_url" "http://127.0.0.1"
$SUDO_WWW $CAKE Admin setSetting "Plugin.Import_services_port" 6666
$SUDO_WWW $CAKE Admin setSetting "Plugin.Import_timeout" 300
$SUDO_WWW $CAKE Admin setSetting "Plugin.Import_ocr_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Import_mispjson_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Import_openiocimport_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Import_threatanalyzer_import_enabled" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Import_csvimport_enabled" true
# Enable Export modules, set better timeout
$SUDO_WWW $CAKE Admin setSetting "Plugin.Export_services_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.Export_services_url" "http://127.0.0.1"
$SUDO_WWW $CAKE Admin setSetting "Plugin.Export_services_port" 6666
$SUDO_WWW $CAKE Admin setSetting "Plugin.Export_timeout" 300
$SUDO_WWW $CAKE Admin setSetting "Plugin.Export_pdfexport_enabled" true
}
# Main MISP Dashboard install function
mispDashboard ( ) {
debug "Install misp-dashboard"
# Install pyzmq to main MISP venv
debug "Installing PyZMQ"
$SUDO_WWW ${ PATH_TO_MISP } /venv/bin/pip install pyzmq
cd /var/www
sudo mkdir misp-dashboard
sudo chown $WWW_USER :$WWW_USER misp-dashboard
false; while [ [ $? -ne 0 ] ] ; do $SUDO_WWW git clone https://github.com/MISP/misp-dashboard.git; done
cd misp-dashboard
sudo -H /var/www/misp-dashboard/install_dependencies.sh
sudo sed -i "s/^host\ =\ localhost/host\ =\ 0.0.0.0/g" /var/www/misp-dashboard/config/config.cfg
sudo sed -i '/Listen 80/a Listen 0.0.0.0:8001' /etc/apache2/ports.conf
sudo apt install libapache2-mod-wsgi-py3 net-tools -y
echo " <VirtualHost *:8001>
ServerAdmin admin@misp.local
ServerName misp.local
DocumentRoot /var/www/misp-dashboard
WSGIDaemonProcess misp-dashboard \
user = misp group = misp \
python-home= /var/www/misp-dashboard/DASHENV \
processes = 1 \
threads = 15 \
maximum-requests= 5000 \
listen-backlog= 100 \
queue-timeout= 45 \
socket-timeout= 60 \
connect-timeout= 15 \
request-timeout= 60 \
inactivity-timeout= 0 \
deadlock-timeout= 60 \
graceful-timeout= 15 \
eviction-timeout= 0 \
shutdown-timeout= 5 \
send-buffer-size= 0 \
receive-buffer-size= 0 \
header-buffer-size= 0 \
response-buffer-size= 0 \
server-metrics= Off
WSGIScriptAlias / /var/www/misp-dashboard/misp-dashboard.wsgi
<Directory /var/www/misp-dashboard>
WSGIProcessGroup misp-dashboard
WSGIApplicationGroup %{ GLOBAL}
Require all granted
</Directory>
LogLevel info
ErrorLog /var/log/apache2/misp-dashboard.local_error.log
CustomLog /var/log/apache2/misp-dashboard.local_access.log combined
ServerSignature Off
</VirtualHost>" | sudo tee /etc/apache2/sites-available/misp-dashboard.conf
# Enable misp-dashboard in apache and reload
sudo a2ensite misp-dashboard
sudo systemctl restart apache2
# Needs to be started after apache2 is reloaded so the port status check works
$SUDO_WWW bash /var/www/misp-dashboard/start_all.sh
# Add misp-dashboard to rc.local to start on boot.
sudo sed -i -e '$i \sudo -u www-data bash /var/www/misp-dashboard/start_all.sh > /tmp/misp-dashboard_rc.local.log\n' /etc/rc.local
}
dashboardCAKE ( ) {
# Enable ZeroMQ for misp-dashboard
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_event_notifications_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_object_notifications_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_object_reference_notifications_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_attribute_notifications_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_sighting_notifications_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_user_notifications_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_organisation_notifications_enable" true
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_port" 50000
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_redis_host" "localhost"
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_redis_port" 6379
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_redis_database" 1
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_redis_namespace" "mispq"
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_include_attachments" false
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_tag_notifications_enable" false
$SUDO_WWW $CAKE Admin setSetting "Plugin.ZeroMQ_audit_notifications_enable" false
}
# Main mail2misp install function
mail2misp ( ) {
debug " Installing Mail2 ${ LBLUE } MISP ${ NC } "
cd /usr/local/src/
sudo apt-get install cmake libcaca-dev liblua5.3-dev -y
false; while [ [ $? -ne 0 ] ] ; do $SUDO_CMD git clone https://github.com/MISP/mail_to_misp.git; done
## TODO: The below fails miserably (obviously) if faup/gtcac dirs exist, let's just make the dangerous assumption (for the sake of the installer, that they exist)
##[[ ! -d "faup" ]] && false; while [[ $? -ne 0 ]]; do $SUDO_CMD git clone https://github.com/stricaud/faup.git faup; done
##[[ ! -d "gtcaca" ]] && false; while [[ $? -ne 0 ]]; do $SUDO_CMD git clone https://github.com/stricaud/gtcaca.git gtcaca; done
sudo chown -R ${ MISP_USER } :${ MISP_USER } faup mail_to_misp gtcaca
cd gtcaca
$SUDO_CMD mkdir -p build
cd build
$SUDO_CMD cmake .. && $SUDO_CMD make
sudo make install
cd ../../faup
$SUDO_CMD mkdir -p build
cd build
$SUDO_CMD cmake .. && $SUDO_CMD make
sudo make install
sudo ldconfig
cd ../../mail_to_misp
$SUDO_CMD virtualenv -p python3 venv
$SUDO_CMD ./venv/bin/pip install lief
$SUDO_CMD ./venv/bin/pip install -r requirements.txt
$SUDO_CMD cp mail_to_misp_config.py-example mail_to_misp_config.py
##$SUDO cp mail_to_misp_config.py-example mail_to_misp_config.py
$SUDO_CMD sed -i "s/^misp_url\ =\ 'YOUR_MISP_URL'/misp_url\ =\ 'https:\/\/localhost'/g" /usr/local/src/mail_to_misp/mail_to_misp_config.py
$SUDO_CMD sed -i " s/^misp_key\ =\ 'YOUR_KEY_HERE'/misp_key\ =\ ' ${ AUTH_KEY } '/g " /usr/local/src/mail_to_misp/mail_to_misp_config.py
}
ssdeep ( ) {
debug "Install ssdeep 2.14.1"
cd /usr/local/src
$SUDO_CMD wget https://github.com/ssdeep-project/ssdeep/releases/download/release-2.14.1/ssdeep-2.14.1.tar.gz
$SUDO_CMD tar zxvf ssdeep-2.14.1.tar.gz
cd ssdeep-2.14.1
$SUDO_CMD ./configure --datadir= /usr --prefix= /usr --localstatedir= /var --sysconfdir= /etc
$SUDO_CMD make
sudo make install
#installing ssdeep_php
sudo pecl channel-update pecl.php.net
sudo pecl install ssdeep
# You should add "extension=ssdeep.so" to mods-available - Check /etc/php for your current version
echo "extension=ssdeep.so" | sudo tee ${ PHP_ETC_BASE } /mods-available/ssdeep.ini
sudo phpenmod ssdeep
sudo service apache2 restart
}
# viper-web is broken ATM
# Main Viper install function
viper ( ) {
export PATH = $PATH :/home/misp/.local/bin
debug "Installing Viper dependencies"
cd /usr/local/src/
sudo apt-get install \
libssl-dev swig python3-ssdeep p7zip-full unrar-free sqlite python3-pyclamd exiftool radare2 \
python3-magic python3-sqlalchemy python3-prettytable libffi-dev libfreetype6-dev libpng-dev -qy
if [ [ -f "/etc/debian_version" ] ] ; then
if [ [ " $( cat /etc/debian_version) " = = "9.9" ] ] ; then
sudo apt-get install libpython3.5-dev -qy
fi
fi
echo "Cloning Viper"
false; while [ [ $? -ne 0 ] ] ; do $SUDO_CMD git clone https://github.com/viper-framework/viper.git; done
false; while [ [ $? -ne 0 ] ] ; do $SUDO_CMD git clone https://github.com/viper-framework/viper-web.git; done
sudo chown -R $MISP_USER :$MISP_USER viper
sudo chown -R $MISP_USER :$MISP_USER viper-web
cd viper
echo "Creating virtualenv"
$SUDO_CMD virtualenv -p python3 venv
echo "Submodule update"
# TODO: Check for current user install permissions
$SUDO_CMD git submodule update --init --recursive
echo "pip install deps"
$SUDO_CMD ./venv/bin/pip install pefile olefile jbxapi Crypto pypdns pypssl r2pipe pdftools virustotal-api SQLAlchemy PrettyTable python-magic scrapy lief
$SUDO_CMD ./venv/bin/pip install .
echo 'update-modules' | /usr/local/src/viper/venv/bin/viper
cd /usr/local/src/viper-web
$SUDO_CMD sed -i '1 s/^.*$/\#!\/usr\/local\/src\/viper\/venv\/bin\/python/' viper-web
$SUDO_CMD /usr/local/src/viper/venv/bin/pip install -r requirements.txt
echo "Launching viper-web"
$SUDO_CMD /usr/local/src/viper-web/viper-web -p 8888 -H 0.0.0.0 &
echo 'PATH="/home/misp/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/usr/local/src/viper:/var/www/MISP/app/Console"' | sudo tee -a /etc/environment
echo ". /etc/environment" >> /home/${ MISP_USER } /.profile
# TODO: Perms, MISP_USER_HOME, nasty hack cuz Kali on R00t
if [ -f /home/${ MISP_USER } /.viper/viper.conf ] ; then
VIPER_HOME = " /home/ ${ MISP_USER } /.viper "
else
VIPER_HOME = " ${ HOME } /.viper "
fi
echo "Setting misp_url/misp_key"
$SUDO_CMD sed -i "s/^misp_url\ =/misp_url\ =\ http:\/\/localhost/g" ${ VIPER_HOME } /viper.conf
$SUDO_CMD sed -i " s/^misp_key\ =/misp_key\ =\ $AUTH_KEY /g " ${ VIPER_HOME } /viper.conf
# Reset admin password to: admin/Password1234
echo "Fixing admin.db with default password"
VIPER_COUNT = 0
while [ " $( sudo sqlite3 ${ VIPER_HOME } /admin.db 'UPDATE auth_user SET password="pbkdf2_sha256$100000$iXgEJh8hz7Cf$vfdDAwLX8tko1t0M1TLTtGlxERkNnltUnMhbv56wK/U="' ; echo $? ) " -ne "0" ] ; do
# FIXME This might lead to a race condition, the while loop is sub-par
sudo chown $MISP_USER :$MISP_USER ${ VIPER_HOME } /admin.db
echo "Updating viper-web admin password, giving process time to start-up, sleeping 5, 4, 3,…"
sleep 6
VIPER_COUNT = $[ $VIPER_COUNT +1]
if [ [ " $VIPER_COUNT " > '10' ] ] ; then
echo "Something is wrong with updating viper. Continuing without db update."
break
fi
done
# Add viper-web to rc.local to be started on boot
sudo sed -i -e '$i \sudo -u misp /usr/local/src/viper/viper-web -p 8888 -H 0.0.0.0 > /tmp/viper-web_rc.local.log &\n' /etc/rc.local
}
enableReposRHEL ( ) {
sudo subscription-manager refresh
sudo subscription-manager repos --enable rhel-7-server-optional-rpms
sudo subscription-manager repos --enable rhel-7-server-extras-rpms
sudo subscription-manager repos --enable rhel-server-rhscl-7-rpms
}
centosEPEL ( ) {
# We need some packages from the Extra Packages for Enterprise Linux repository
sudo yum install epel-release -y
# Since MISP 2.4 PHP 5.5 is a minimal requirement, so we need a newer version than CentOS base provides
# Software Collections is a way do to this, see https://wiki.centos.org/AdditionalResources/Repositories/SCL
sudo yum install centos-release-scl -y
}
enableEPEL ( ) {
sudo yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm -y
}
yumInstallCoreDeps ( ) {
# Install the dependencies:
sudo yum install gcc git zip rh-git218 \
httpd24 \
mod_ssl \
rh-redis32 \
rh-mariadb102 \
libxslt-devel zlib-devel ssdeep-devel -y
# Enable and start redis
sudo systemctl enable --now rh-redis32-redis.service
WWW_USER = "apache"
SUDO_WWW = " sudo -H -u $WWW_USER "
RUN_PHP = "/usr/bin/scl enable rh-php72"
PHP_INI = "/etc/opt/rh/rh-php72/php.ini"
# Install PHP 7.2 from SCL, see https://www.softwarecollections.org/en/scls/rhscl/rh-php72/
sudo yum install rh-php72 rh-php72-php-fpm rh-php72-php-devel \
rh-php72-php-mysqlnd \
rh-php72-php-mbstring \
rh-php72-php-xml \
rh-php72-php-bcmath \
rh-php72-php-opcache \
rh-php72-php-zip \
rh-php72-php-gd -y
# Python 3.6 is now available in RHEL 7.7 base
sudo yum install python3 python3-devel -y
sudo systemctl enable --now rh-php72-php-fpm.service
}
installCoreRHEL ( ) {
# Download MISP using git in the $PATH_TO_MISP directory.
sudo mkdir -p $( dirname $PATH_TO_MISP )
sudo chown $WWW_USER :$WWW_USER $( dirname $PATH_TO_MISP )
cd $( dirname $PATH_TO_MISP )
$SUDO_WWW git clone https://github.com/MISP/MISP.git
cd $PATH_TO_MISP
##$SUDO_WWW git checkout tags/$(git describe --tags `git rev-list --tags --max-count=1`)
# if the last shortcut doesn't work, specify the latest version manually
# example: git checkout tags/v2.4.XY
# the message regarding a "detached HEAD state" is expected behaviour
# (you only have to create a new branch, if you want to change stuff and do a pull request for example)
# Fetch submodules
$SUDO_WWW git submodule update --init --recursive
# Make git ignore filesystem permission differences for submodules
$SUDO_WWW git submodule foreach --recursive git config core.filemode false
# Make git ignore filesystem permission differences
$SUDO_WWW git config core.filemode false
# Create a python3 virtualenv
sudo pip3 install virtualenv
$SUDO_WWW python3 -m venv $PATH_TO_MISP /venv
sudo mkdir /usr/share/httpd/.cache
sudo chown $WWW_USER :$WWW_USER /usr/share/httpd/.cache
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install -U pip setuptools
cd $PATH_TO_MISP /app/files/scripts
$SUDO_WWW git clone https://github.com/CybOXProject/python-cybox.git
$SUDO_WWW git clone https://github.com/STIXProject/python-stix.git
$SUDO_WWW git clone --branch master --single-branch https://github.com/lief-project/LIEF.git lief
$SUDO_WWW git clone https://github.com/CybOXProject/mixbox.git
# If you umask is has been changed from the default, it is a good idea to reset it to 0022 before installing python modules
UMASK = $( umask )
umask 0022
cd $PATH_TO_MISP /app/files/scripts/python-cybox
$SUDO_WWW git config core.filemode false
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install .
cd $PATH_TO_MISP /app/files/scripts/python-stix
$SUDO_WWW git config core.filemode false
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install .
# install mixbox to accommodate the new STIX dependencies:
cd $PATH_TO_MISP /app/files/scripts/mixbox
$SUDO_WWW git config core.filemode false
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install .
# install STIX2.0 library to support STIX 2.0 export:
cd $PATH_TO_MISP /cti-python-stix2
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install .
# install maec
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install -U maec
# install zmq
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install -U zmq
# install redis
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install -U redis
# lief needs manual compilation
sudo yum install devtoolset-7 cmake3 cppcheck libcxx-devel -y
cd $PATH_TO_MISP /app/files/scripts/lief
$SUDO_WWW git config core.filemode false
$SUDO_WWW mkdir build
cd build
$SUDO_WWW scl enable devtoolset-7 " bash -c 'cmake3 \
-DLIEF_PYTHON_API= on \
-DPYTHON_VERSION= 3.6 \
-DPYTHON_EXECUTABLE= $PATH_TO_MISP /venv/bin/python \
-DLIEF_DOC= off \
-DCMAKE_BUILD_TYPE= Release \
..' "
$SUDO_WWW make -j3 pyLIEF
if [ $? = = 2 ] ; then
# In case you get "internal compiler error: Killed (program cc1plus)"
# You ran out of memory.
# Create some swap
sudo dd if = /dev/zero of = /var/swap.img bs = 1024k count = 4000
sudo mkswap /var/swap.img
sudo swapon /var/swap.img
# And compile again
$SUDO_WWW make -j3 pyLIEF
sudo swapoff /var/swap.img
sudo rm /var/swap.img
fi
# The following adds a PYTHONPATH to where the pyLIEF module has been compiled
echo $PATH_TO_MISP /app/files/scripts/lief/build/api/python | $SUDO_WWW tee $PATH_TO_MISP /venv/lib/python3.6/site-packages/lief.pth
# install magic, pydeep
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install -U python-magic git+https://github.com/kbandla/pydeep.git plyara
# install PyMISP
cd $PATH_TO_MISP /PyMISP
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install -U .
# FIXME: Remove libfaup etc once the egg has the library baked-in
# BROKEN: This needs to be tested on RHEL/CentOS
##sudo apt-get install cmake libcaca-dev liblua5.3-dev -y
cd /tmp
[ [ ! -d "faup" ] ] && $SUDO_CMD git clone https://github.com/stricaud/faup.git faup
[ [ ! -d "gtcaca" ] ] && $SUDO_CMD git clone https://github.com/stricaud/gtcaca.git gtcaca
sudo chown -R ${ MISP_USER } :${ MISP_USER } faup gtcaca
cd gtcaca
$SUDO_CMD mkdir -p build
cd build
$SUDO_CMD cmake .. && $SUDO_CMD make
sudo make install
cd ../../faup
$SUDO_CMD mkdir -p build
cd build
$SUDO_CMD cmake .. && $SUDO_CMD make
sudo make install
sudo ldconfig
# Enable dependencies detection in the diagnostics page
# This allows MISP to detect GnuPG, the Python modules' versions and to read the PHP settings.
# The LD_LIBRARY_PATH setting is needed for rh-git218 to work
echo "env[PATH] = /opt/rh/rh-git218/root/usr/bin:/opt/rh/rh-redis32/root/usr/bin:/opt/rh/rh-php72/root/usr/bin:/usr/local/bin:/usr/bin:/bin" | sudo tee -a /etc/opt/rh/rh-php72/php-fpm.d/www.conf
sudo sed -i.org -e 's/^;\(clear_env = no\)/\1/' /etc/opt/rh/rh-php72/php-fpm.d/www.conf
sudo systemctl restart rh-php72-php-fpm.service
umask $UMASK
}
installCake_RHEL ( )
{
sudo chown -R $WWW_USER :$WWW_USER $PATH_TO_MISP
sudo mkdir /usr/share/httpd/.composer
sudo chown $WWW_USER :$WWW_USER /usr/share/httpd/.composer
cd $PATH_TO_MISP /app
# Update composer.phar (optional)
#EXPECTED_SIGNATURE="$(wget -q -O - https://composer.github.io/installer.sig)"
#$SUDO_WWW $RUN_PHP -- php -r "copy('https://getcomposer.org/installer', 'composer-setup.php');"
#$SUDO_WWW $RUN_PHP -- php -r "if (hash_file('SHA384', 'composer-setup.php') === '$EXPECTED_SIGNATURE') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('composer-setup.php'); } echo PHP_EOL;"
#$SUDO_WWW $RUN_PHP "php composer-setup.php"
#$SUDO_WWW $RUN_PHP -- php -r "unlink('composer-setup.php');"
$SUDO_WWW $RUN_PHP "php composer.phar install"
## sudo yum install php-redis -y
sudo scl enable rh-php72 'pecl channel-update pecl.php.net'
sudo scl enable rh-php72 'yes no|pecl install redis'
echo "extension=redis.so" | sudo tee /etc/opt/rh/rh-php72/php.d/99-redis.ini
sudo ln -s /usr/lib64/libfuzzy.so /usr/lib/libfuzzy.so
sudo scl enable rh-php72 'pecl install ssdeep'
echo "extension=ssdeep.so" | sudo tee /etc/opt/rh/rh-php72/php.d/99-ssdeep.ini
# Install gnupg extension
sudo yum install gpgme-devel -y
sudo scl enable rh-php72 'pecl install gnupg'
echo "extension=gnupg.so" | sudo tee /etc/opt/rh/rh-php72/php.d/99-gnupg.ini
sudo systemctl restart rh-php72-php-fpm.service
# If you have not yet set a timezone in php.ini
echo 'date.timezone = "Asia/Tokyo"' | sudo tee /etc/opt/rh/rh-php72/php.d/timezone.ini
# Recommended: Change some PHP settings in /etc/opt/rh/rh-php72/php.ini
# max_execution_time = 300
# memory_limit = 2048M
# upload_max_filesize = 50M
# post_max_size = 50M
for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
do
sudo sed -i " s/^\( $key \).*/\1 = $( eval echo \$ { $key } ) / " $PHP_INI
done
sudo systemctl restart rh-php72-php-fpm.service
# To use the scheduler worker for scheduled tasks, do the following:
sudo cp -fa $PATH_TO_MISP /INSTALL/setup/config.php $PATH_TO_MISP /app/Plugin/CakeResque/Config/config.php
}
apacheConfig_RHEL ( ) {
# Now configure your apache server with the DocumentRoot $PATH_TO_MISP/app/webroot/
# A sample vhost can be found in $PATH_TO_MISP/INSTALL/apache.misp.centos7
sudo cp $PATH_TO_MISP /INSTALL/apache.misp.centos7.ssl /etc/httpd/conf.d/misp.ssl.conf
#sudo sed -i "s/SetHandler/\#SetHandler/g" /etc/httpd/conf.d/misp.ssl.conf
sudo rm /etc/httpd/conf.d/ssl.conf
sudo chmod 644 /etc/httpd/conf.d/misp.ssl.conf
sudo sed -i '/Listen 80/a Listen 443' /etc/httpd/conf/httpd.conf
# If a valid SSL certificate is not already created for the server, create a self-signed certificate:
echo " The Common Name used below will be: ${ OPENSSL_CN } "
# This will take a rather long time, be ready. (13min on a VM, 8GB Ram, 1 core)
if [ [ ! -e "/etc/pki/tls/certs/dhparam.pem" ] ] ; then
sudo openssl dhparam -out /etc/pki/tls/certs/dhparam.pem 4096
fi
sudo openssl genrsa -des3 -passout pass:xxxx -out /tmp/misp.local.key 4096
sudo openssl rsa -passin pass:xxxx -in /tmp/misp.local.key -out /etc/pki/tls/private/misp.local.key
sudo rm /tmp/misp.local.key
sudo openssl req -new -subj " /C= ${ OPENSSL_C } /ST= ${ OPENSSL_ST } /L= ${ OPENSSL_L } /O= ${ OPENSSL_O } /OU= ${ OPENSSL_OU } /CN= ${ OPENSSL_CN } /emailAddress= ${ OPENSSL_EMAILADDRESS } " -key /etc/pki/tls/private/misp.local.key -out /etc/pki/tls/certs/misp.local.csr
sudo openssl x509 -req -days 365 -in /etc/pki/tls/certs/misp.local.csr -signkey /etc/pki/tls/private/misp.local.key -out /etc/pki/tls/certs/misp.local.crt
sudo ln -s /etc/pki/tls/certs/misp.local.csr /etc/pki/tls/certs/misp-chain.crt
cat /etc/pki/tls/certs/dhparam.pem | sudo tee -a /etc/pki/tls/certs/misp.local.crt
sudo systemctl restart httpd.service
# Since SELinux is enabled, we need to allow httpd to write to certain directories
sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP /app/files
sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP /app/files/terms
sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP /app/files/scripts/tmp
sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP /app/Plugin/CakeResque/tmp
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP /app/Console/cake
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP /app/Console/worker/*.sh
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP /app/files/scripts/*.py
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP /app/files/scripts/*/*.py
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP /app/files/scripts/lief/build/api/python/lief.so
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP /app/Vendor/pear/crypt_gpg/scripts/crypt-gpg-pinentry
sudo chcon -R -t bin_t $PATH_TO_MISP /venv/bin/*
find $PATH_TO_MISP /venv -type f -name "*.so*" -or -name "*.so.*" | xargs sudo chcon -t lib_t
# Only run these if you want to be able to update MISP from the web interface
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP /.git
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP /app/tmp
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP /app/Lib
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP /app/Config
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP /app/webroot/img/orgs
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP /app/webroot/img/custom
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP /app/files/scripts/mispzmq
}
firewall_RHEL ( ) {
# Allow httpd to connect to the redis server and php-fpm over tcp/ip
sudo setsebool -P httpd_can_network_connect on
# Allow httpd to send emails from php
sudo setsebool -P httpd_can_sendmail on
# Enable and start the httpd service
sudo systemctl enable --now httpd.service
# Open a hole in the iptables firewall
sudo firewall-cmd --zone= public --add-port= 80/tcp --permanent
sudo firewall-cmd --zone= public --add-port= 443/tcp --permanent
sudo firewall-cmd --reload
}
# Main function to fix permissions to something sane
permissions_RHEL ( ) {
sudo chown -R $WWW_USER :$WWW_USER $PATH_TO_MISP
## ? chown -R root:$WWW_USER $PATH_TO_MISP
sudo find $PATH_TO_MISP -type d -exec chmod g = rx { } \;
sudo chmod -R g+r,o= $PATH_TO_MISP
## **Note :** For updates through the web interface to work, apache must own the $PATH_TO_MISP folder and its subfolders as shown above, which can lead to security issues. If you do not require updates through the web interface to work, you can use the following more restrictive permissions :
sudo chmod -R 750 $PATH_TO_MISP
sudo chmod -R g+xws $PATH_TO_MISP /app/tmp
sudo chmod -R g+ws $PATH_TO_MISP /app/files
sudo chmod -R g+ws $PATH_TO_MISP /app/files/scripts/tmp
sudo chmod -R g+rw $PATH_TO_MISP /venv
sudo chmod -R g+rw $PATH_TO_MISP /.git
sudo chown $WWW_USER :$WWW_USER $PATH_TO_MISP /app/files
sudo chown $WWW_USER :$WWW_USER $PATH_TO_MISP /app/files/terms
sudo chown $WWW_USER :$WWW_USER $PATH_TO_MISP /app/files/scripts/tmp
sudo chown $WWW_USER :$WWW_USER $PATH_TO_MISP /app/Plugin/CakeResque/tmp
sudo chown -R $WWW_USER :$WWW_USER $PATH_TO_MISP /app/Config
sudo chown -R $WWW_USER :$WWW_USER $PATH_TO_MISP /app/tmp
sudo chown -R $WWW_USER :$WWW_USER $PATH_TO_MISP /app/webroot/img/orgs
sudo chown -R $WWW_USER :$WWW_USER $PATH_TO_MISP /app/webroot/img/custom
}
logRotation_RHEL ( ) {
# MISP saves the stdout and stderr of its workers in $PATH_TO_MISP/app/tmp/logs
# To rotate these logs install the supplied logrotate script:
sudo cp $PATH_TO_MISP /INSTALL/misp.logrotate /etc/logrotate.d/misp
sudo chmod 0640 /etc/logrotate.d/misp
# Now make logrotate work under SELinux as well
# Allow logrotate to modify the log files
sudo semanage fcontext -a -t httpd_sys_rw_content_t " $PATH_TO_MISP (/.*)? "
sudo semanage fcontext -a -t httpd_log_t " $PATH_TO_MISP /app/tmp/logs(/.*)? "
sudo chcon -R -t httpd_log_t $PATH_TO_MISP /app/tmp/logs
# Impact of the following: ?!?!?!!?111
##sudo restorecon -R $PATH_TO_MISP
# Allow logrotate to read /var/www
sudo checkmodule -M -m -o /tmp/misplogrotate.mod $PATH_TO_MISP /INSTALL/misplogrotate.te
sudo semodule_package -o /tmp/misplogrotate.pp -m /tmp/misplogrotate.mod
sudo semodule -i /tmp/misplogrotate.pp
}
configMISP_RHEL ( ) {
# There are 4 sample configuration files in $PATH_TO_MISP/app/Config that need to be copied
$SUDO_WWW cp -a $PATH_TO_MISP /app/Config/bootstrap.default.php $PATH_TO_MISP /app/Config/bootstrap.php
$SUDO_WWW cp -a $PATH_TO_MISP /app/Config/database.default.php $PATH_TO_MISP /app/Config/database.php
$SUDO_WWW cp -a $PATH_TO_MISP /app/Config/core.default.php $PATH_TO_MISP /app/Config/core.php
$SUDO_WWW cp -a $PATH_TO_MISP /app/Config/config.default.php $PATH_TO_MISP /app/Config/config.php
echo " <?php
class DATABASE_CONFIG {
public \$ default = array(
'datasource' = > 'Database/Mysql' ,
//'datasource' = > 'Database/Postgres' ,
'persistent' = > false,
'host' = > '$DBHOST' ,
'login' = > '$DBUSER_MISP' ,
'port' = > 3306, // MySQL & MariaDB
//'port' = > 5432, // PostgreSQL
'password' = > '$DBPASSWORD_MISP' ,
'database' = > '$DBNAME' ,
'prefix' = > '' ,
'encoding' = > 'utf8' ,
) ;
} " | $SUDO_WWW tee $PATH_TO_MISP /app/Config/database.php
# Configure the fields in the newly created files:
# config.php : baseurl (example: 'baseurl' => 'http://misp',) - don't use "localhost" it causes issues when browsing externally
# core.php : Uncomment and set the timezone: `// date_default_timezone_set('UTC');`
# database.php : login, port, password, database
# DATABASE_CONFIG has to be filled
# With the default values provided in section 6, this would look like:
# class DATABASE_CONFIG {
# public $default = array(
# 'datasource' => 'Database/Mysql',
# 'persistent' => false,
# 'host' => 'localhost',
# 'login' => 'misp', // grant usage on *.* to misp@localhost
# 'port' => 3306,
# 'password' => 'XXXXdbpasswordhereXXXXX', // identified by 'XXXXdbpasswordhereXXXXX';
# 'database' => 'misp', // create database misp;
# 'prefix' => '',
# 'encoding' => 'utf8',
# );
#}
# Important! Change the salt key in $PATH_TO_MISP/app/Config/config.php
# The admin user account will be generated on the first login, make sure that the salt is changed before you create that user
# If you forget to do this step, and you are still dealing with a fresh installation, just alter the salt,
# delete the user from mysql and log in again using the default admin credentials (admin@admin.test / admin)
# If you want to be able to change configuration parameters from the webinterface:
sudo chown $WWW_USER :$WWW_USER $PATH_TO_MISP /app/Config/config.php
sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP /app/Config/config.php
# Generate a GPG encryption key.
cat >/tmp/gen-key-script <<EOF
%echo Generating a default key
Key-Type: default
Key-Length: $GPG_KEY_LENGTH
Subkey-Type: default
Name-Real: $GPG_REAL_NAME
Name-Comment: $GPG_COMMENT
Name-Email: $GPG_EMAIL_ADDRESS
Expire-Date: 0
Passphrase: $GPG_PASSPHRASE
# Do a commit here, so that we can later print "done"
%commit
%echo done
EOF
sudo gpg --homedir $PATH_TO_MISP /.gnupg --batch --gen-key /tmp/gen-key-script
sudo rm -f /tmp/gen-key-script
sudo chown -R $WWW_USER :$WWW_USER $PATH_TO_MISP /.gnupg
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP /.gnupg
# And export the public key to the webroot
sudo gpg --homedir $PATH_TO_MISP /.gnupg --export --armor $GPG_EMAIL_ADDRESS | sudo tee $PATH_TO_MISP /app/webroot/gpg.asc
sudo chown $WWW_USER :$WWW_USER $PATH_TO_MISP /app/webroot/gpg.asc
echo " Admin (root) DB Password: $DBPASSWORD_ADMIN "
echo " User (misp) DB Password: $DBPASSWORD_MISP "
}
configWorkersRHEL ( ) {
echo " [Unit]
Description = MISP background workers
After = rh-mariadb102-mariadb.service rh-redis32-redis.service rh-php72-php-fpm.service
[ Service]
Type = forking
User = $WWW_USER
Group = $WWW_USER
ExecStart = /usr/bin/scl enable rh-php72 rh-redis32 rh-mariadb102 $PATH_TO_MISP /app/Console/worker/start.sh
Restart = always
RestartSec = 10
[ Install]
WantedBy = multi-user.target" |sudo tee /etc/systemd/system/misp-workers.service
sudo chmod +x $PATH_TO_MISP /app/Console/worker/start.sh
sudo systemctl daemon-reload
sudo systemctl enable --now misp-workers.service
}
mispmodulesRHEL ( ) {
# some misp-modules dependencies
sudo yum install openjpeg-devel gcc-c++ poppler-cpp-devel pkgconfig python-devel redhat-rpm-config -y
sudo chmod 2777 /usr/local/src
sudo chown root:users /usr/local/src
cd /usr/local/src/
false; while [ [ $? -ne 0 ] ] ; do $SUDO_WWW git clone https://github.com/MISP/misp-modules.git; done
cd misp-modules
# pip install
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install -U -I -r REQUIREMENTS
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install -U .
$SUDO_WWW $PATH_TO_MISP /venv/bin/pip install pyfaup censys
sudo yum install rubygem-rouge rubygem-asciidoctor zbar-devel opencv-devel -y
echo " [Unit]
Description = MISP modules
After = misp-workers.service
[ Service]
Type = simple
User = $WWW_USER
Group = $WWW_USER
WorkingDirectory = /usr/local/src/misp-modules
Environment = "PATH=/var/www/MISP/venv/bin"
ExecStart = \" ${ PATH_TO_MISP } /venv/bin/misp-modules -l 127.0.0.1 -s\"
Restart = always
RestartSec = 10
[ Install]
WantedBy = multi-user.target" |sudo tee /etc/systemd/system/misp-modules.service
sudo systemctl daemon-reload
# Test misp-modules
$SUDO_WWW $PATH_TO_MISP /venv/bin/misp-modules -l 127.0.0.1 -s &
sudo systemctl enable --now misp-modules
# Enable Enrichment, set better timeouts
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_services_enable" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_hover_enable" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_timeout" 300
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_hover_timeout" 150
# TODO:"Investigate why the next one fails"
#$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_asn_history_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_cve_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_dns_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_btc_steroids_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_ipasn_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_yara_syntax_validator_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_yara_query_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_pdf_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_docx_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_xlsx_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_pptx_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_ods_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_odt_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_services_url" "http://127.0.0.1"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Enrichment_services_port" 6666
# Enable Import modules, set better timeout
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Import_services_enable" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Import_services_url" "http://127.0.0.1"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Import_services_port" 6666
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Import_timeout" 300
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Import_ocr_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Import_mispjson_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Import_openiocimport_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Import_threatanalyzer_import_enabled" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Import_csvimport_enabled" true
# Enable Export modules, set better timeout
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Export_services_enable" true
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Export_services_url" "http://127.0.0.1"
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Export_services_port" 6666
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Export_timeout" 300
$SUDO_WWW $RUN_PHP -- $CAKE Admin setSetting "Plugin.Export_pdfexport_enabled" true
}
# No functions scripts:
## apt-upgrade.sh ##
## postfix.sh ##
## interfaces.sh ##
#
### END AUTOMATED SECTION ###
# This function will generate the main installer.
# It is a helper function for the maintainers of the installer.
colors ( ) {
# Some colors for easier debug and better UX (not colorblind compatible, PR welcome)
RED = '\033[0;31m'
GREEN = '\033[0;32m'
LBLUE = '\033[1;34m'
YELLOW = '\033[0;33m'
HIDDEN = '\e[8m'
NC = '\033[0m'
}
generateInstaller ( ) {
if [ [ ! -f $( which xsnippet) ] ] ; then
echo 'xsnippet is NOT installed. Clone the repository below and copy the xsnippet shell script somehwere in your $PATH'
echo "git clone https://github.com/SteveClement/xsnippet.git"
exit 1
fi
if [ [ " $( echo $0 | grep -e '^\.\/' ) " != "./INSTALL.tpl.sh" ] ] ; then
echo -e " ${ RED } iAmError! ${ NC } "
echo -e "To generate the installer call it with './INSTALL.tpl.sh' otherwise things will break."
echo -e " You called: ${ RED } $0 ${ NC } "
exit 1
fi
mkdir installer ; cd installer
cp ../INSTALL.tpl.sh .
# Pull code snippets out of Main Install Documents
for f in ` echo INSTALL.ubuntu2004.md INSTALL.ubuntu1804.md xINSTALL.debian9.md INSTALL.kali.md xINSTALL.debian10.md xINSTALL.tsurugi.md xINSTALL.debian9-postgresql.md xINSTALL.ubuntu1804.with.webmin.md INSTALL.rhel7.md` ; do
xsnippet . ../../docs/${ f }
done
# Pull out code snippets from generic Install Documents
for f in ` echo globalVariables.md mail_to_misp-debian.md MISP_CAKE_init.md misp-dashboard-debian.md misp-modules-debian.md gnupg.md ssdeep-debian.md sudo_etckeeper.md supportFunctions.md viper-debian.md misp-modules-centos.md` ; do
xsnippet . ../../docs/generic/${ f }
done
# TODO: Fix the below.
# $ for f in `echo ls [0-9]_*`; do
# $ perl -pe 's/## ${f} ##/`cat ${f}`/ge' -i INSTALL.sh
# $ done
#
# Temporary copy/paste holder
perl -pe 's/^## 0_global-vars.sh ##/`cat 0_global-vars.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_apt-upgrade.sh ##/`cat 0_apt-upgrade.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_sudoKeeper.sh ##/`cat 0_sudoKeeper.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_installCoreDeps.sh ##/`cat 0_installCoreDeps.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_installDepsPhp74.sh ##/`cat 0_installDepsPhp74.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_installDepsPhp73.sh ##/`cat 0_installDepsPhp73.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_installDepsPhp72.sh ##/`cat 0_installDepsPhp72.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_installDepsPhp70.sh ##/`cat 0_installDepsPhp70.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 1_apacheConfig.sh ##/`cat 1_apacheConfig.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 1_mispCoreInstall.sh ##/`cat 1_mispCoreInstall.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 1_installCake.sh ##/`cat 1_installCake.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 2_permissions.sh ##/`cat 2_permissions.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 2_configMISP.sh ##/`cat 2_configMISP.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_support-functions.sh ##/`cat 0_support-functions.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 2_gnupg.sh ##/`cat 2_gnupg.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 2_logRotation.sh ##/`cat 2_logRotation.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 2_backgroundWorkers.sh ##/`cat 2_backgroundWorkers.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 2_core-cake.sh ##/`cat 2_core-cake.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 3_misp-modules.sh ##/`cat 3_misp-modules.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 4_misp-dashboard-cake.sh ##/`cat 4_misp-dashboard-cake.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 4_misp-dashboard.sh ##/`cat 4_misp-dashboard.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 5_mail_to_misp.sh ##/`cat 5_mail_to_misp.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 6_viper.sh ##/`cat 6_viper.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 6_ssdeep.sh ##/`cat 6_ssdeep.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_RHEL_SCL.sh ##/`cat 0_RHEL_SCL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_CentOS_EPEL.sh ##/`cat 0_CentOS_EPEL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_RHEL_EPEL.sh ##/`cat 0_RHEL_EPEL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 0_yumInstallCoreDeps.sh ##/`cat 0_yumInstallCoreDeps.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 1_mispCoreInstall_RHEL.sh ##/`cat 1_mispCoreInstall_RHEL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 1_installCake_RHEL.sh ##/`cat 1_installCake_RHEL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 2_permissions_RHEL.sh ##/`cat 2_permissions_RHEL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 1_apacheConfig_RHEL.sh ##/`cat 1_apacheConfig_RHEL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 1_firewall_RHEL.sh ##/`cat 1_firewall_RHEL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 2_logRotation_RHEL.sh ##/`cat 2_logRotation_RHEL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 2_configMISP_RHEL.sh ##/`cat 2_configMISP_RHEL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 3_configWorkers_RHEL.sh ##/`cat 3_configWorkers_RHEL.sh`/ge' -i INSTALL.tpl.sh
perl -pe 's/^## 3_misp-modules_RHEL.sh ##/`cat 3_misp-modules_RHEL.sh`/ge' -i INSTALL.tpl.sh
cp INSTALL.tpl.sh ../INSTALL.sh
cd ..
for ALGO in $( echo "1 256 384 512" ) ; do
shasum -a ${ ALGO } INSTALL.sh > INSTALL.sh.sha${ ALGO }
done
[ [ " $( which rhash > /dev/null 2>& 1 ; echo $? ) " = = "0" ] ] && rhash --sfv --sha1 --sha256 --sha384 --sha512 INSTALL.sh > INSTALL.sh.sfv
rm -rf installer
echo -e " ${ LBLUE } Generated INSTALL.sh ${ NC } "
exit 0
}
# Simple debug function with message
# Make sure no alias exists
[ [ $( type -t debug) = = "alias" ] ] && unalias debug
debug ( ) {
if [ [ ! -z ${ DEBUG } ] ] ; then
NO_PROGRESS = 1
exec 3>& 1
read
else
# [Set up conditional redirection](https://stackoverflow.com/questions/8756535/conditional-redirection-in-bash)
#exec 3>&1 &>/dev/null
:
fi
}
installSupported ( ) {
space
echo "Proceeding with the installation of MISP core"
space
# Set Base URL - functionLocation('generic/supportFunctions.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && setBaseURL
progress 4
# Check if sudo is installed and etckeeper - functionLocation('generic/sudo_etckeeper.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && checkSudoKeeper
[ [ ! -z ${ MISP_USER } ] ] && [ [ ! -f /etc/sudoers.d/misp ] ] && echo " % ${ MISP_USER } ALL=(ALL:ALL) NOPASSWD:ALL " | sudo tee /etc/sudoers.d/misp
progress 4
# Set locale if not set - functionLocation('generic/supportFunctions.md')
checkLocale
# Upgrade system to make sure we install the latest packages - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && aptUpgrade
progress 4
# TODO: Double check how the user is added and subsequently used during the install.
# TODO: Work on possibility to install as user X and install MISP for user Y
# TODO: Check if logout needed. (run SUDO_CMD in installer)
# <snippet-begin add-user.sh>
# TODO: Double check how to properly handle postfix
# <snippet-begin postfix.sh>
# Pull in all possible MISP Environment variables - functionLocation('generic/globalVariables.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && MISPvars
progress 4
# Check if MISP user is installed and we do not run as root - functionLocation('generic/supportFunctions.md')
checkID
progress 4
# Starting friendly UI spinner
#spin &
#SPIN_PID=$!
#disown
#trap "kill -9 $SPIN_PID" `seq 0 15`
# Install Core Dependencies - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && installCoreDeps
progress 4
if [ [ " $1 " = ~ ^PHP= ] ] ; then
PHP_VER = $( echo $1 | cut -f2 -d= )
if [ [ " $PHP_VER " = = 7.2 ] ] ; then
# Install PHP 7.2 Dependencies - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && installDepsPhp72
elif [ [ " $PHP_VER " = = 7.3 ] ] ; then
# Install PHP 7.3 Dependencies - functionLocation('generic/supportFunctions.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && installDepsPhp73
elif [ [ " $PHP_VER " = = 7.4 ] ] ; then
# Install PHP 7.4 Dependencies - functionLocation('INSTALL.ubuntu2004.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && installDepsPhp74
elif [ [ " $PHP_VER " = = 7.0 ] ] ; then
# Install PHP 7.0 Dependencies - functionLocation('generic/supportFunctions.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && installDepsPhp70
fi
else
# Install PHP 7.2 Dependencies by dangerous default - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && installDepsPhp72
fi
progress 4
# Install Core MISP - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && installCore
progress 4
# Install PHP Cake - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && installCake
progress 4
# Make sure permissions are sane - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && permissions
progress 4
# Roll Apache Config - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && apacheConfig
progress 4
# Setup log logrotate - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && logRotation
progress 4
# Generate MISP Config files - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && configMISP
progress 4
# Generate GnuPG key - functionLocation('generic/gnupg.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && setupGnuPG
progress 4
# Setup and start background workers - functionLocation('INSTALL.ubuntu1804.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && backgroundWorkers
progress 4
# Run cake CLI for the core installation - functionLocation('generic/MISP_CAKE_init.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && coreCAKE
progress 4
# Update Galaxies, Template Objects, Warning Lists, Notice Lists, Taxonomies - functionLocation('generic/MISP_CAKE_init.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && updateGOWNT
progress 4
# Disable spinner
#(kill $SPIN_PID 2>&1) >/dev/null
# Check if /usr/local/src is writeable by target install user - functionLocation('generic/supportFunctions.md')
[ [ -n $CORE ] ] || [ [ -n $ALL ] ] && checkUsrLocalSrc
progress 4
## Resume spinner
#spin &
#SPIN_PID=$!
#disown
#trap "kill -9 $SPIN_PID" `seq 0 15`
# Install misp-modules - functionLocation('generic/misp-modules-debian.md')
[ [ -n $MODULES ] ] || [ [ -n $ALL ] ] && mispmodules
progress 4
# Install Viper - functionLocation('generic/viper-debian.md')
## FIXME: The current state of Viper is broken, disabling any use.
##[[ -n $VIPER ]] || [[ -n $ALL ]] && viper
##progress 4
# Install ssdeep - functionLocation('generic/ssdeep-debian.md')
[ [ -n $SSDEEP ] ] || [ [ -n $ALL ] ] && ssdeep
progress 4
# Install misp-dashboard - functionLocation('generic/misp-dashboard-debian.md')
## FIXME: The current state of misp-dashboard is broken, disabling any use.
##[[ -n $DASHBOARD ]] || [[ -n $ALL ]] && mispDashboard ; dashboardCAKE
##progress 4
# Install Mail2MISP - functionLocation('generic/mail_to_misp-debian.md')
[ [ -n $MAIL2 ] ] || [ [ -n $ALL ] ] && mail2misp
progress 2
# Run tests
runTests
progress 2
# Run final script to inform the User what happened - functionLocation('generic/supportFunctions.md')
theEnd
}
# Main Kali Install function
installMISPonKali ( ) {
# Kali might have a bug on installs where libc6 is not up to date, this forces bash and libc to update - functionLocation('generic/supportFunctions.md')
kaliUpgrade
# Set locale if not set - functionLocation('generic/supportFunctions.md')
checkLocale
# Set Base URL - functionLocation('generic/supportFunctions.md')
setBaseURL
# Install PHP 7.4 Dependencies - functionLocation('INSTALL.ubuntu2004.md')
installDepsPhp74
# Set custom Kali only variables and tweaks
space
# The following disables sleep on kali/gnome
### FIXME: Disabling for now, maybe source of some issues.
##disableSleep
##debug "Sleeping 3 seconds to make sure the disable sleep does not confuse the execution of the script."
##sleep 3
# Kali specific dependencies - functionLocation('generic/supportFunctions.md')
debug "Installing dependencies"
installDeps
# Install Core Dependencies - functionLocation('INSTALL.ubuntu1804.md')
installCoreDeps
debug "Enabling redis and gnupg modules"
sudo phpenmod -v 7.4 redis
sudo phpenmod -v 7.4 gnupg
debug "Apache2 ops: dismod: status - dissite: 000-default enmod: ssl rewrite headers php7.3 ensite: default-ssl"
sudo a2dismod status
sudo a2enmod ssl rewrite headers php7.4
sudo a2dissite 000-default
sudo a2ensite default-ssl
debug "Restarting mysql.service"
sudo systemctl restart mysql.service
debug "Fixing redis rc script on Kali"
fixRedis
debug "git clone, submodule update everything"
sudo mkdir ${ PATH_TO_MISP }
sudo chown ${ WWW_USER } :${ WWW_USER } ${ PATH_TO_MISP }
cd ${ PATH_TO_MISP }
false; while [ [ $? -ne 0 ] ] ; do ${ SUDO_WWW } git clone https://github.com/MISP/MISP.git ${ PATH_TO_MISP } ; done
${ SUDO_WWW } git config core.filemode false
cd ${ PATH_TO_MISP }
false; while [ [ $? -ne 0 ] ] ; do ${ SUDO_WWW } git submodule update --progress --init --recursive; done
# Make git ignore filesystem permission differences for submodules
${ SUDO_WWW } git submodule foreach --recursive git config core.filemode false
cd ${ PATH_TO_MISP } /app/files/scripts
false; while [ [ $? -ne 0 ] ] ; do ${ SUDO_WWW } git clone https://github.com/CybOXProject/python-cybox.git; done
false; while [ [ $? -ne 0 ] ] ; do ${ SUDO_WWW } git clone https://github.com/STIXProject/python-stix.git; done
false; while [ [ $? -ne 0 ] ] ; do ${ SUDO_WWW } git clone https://github.com/CybOXProject/mixbox.git; done
false; while [ [ $? -ne 0 ] ] ; do ${ SUDO_WWW } git clone https://github.com/MAECProject/python-maec.git; done
sudo mkdir /var/www/.cache/
MISP_USER_HOME = $( sudo -Hiu $MISP_USER env | grep HOME | cut -f 2 -d= )
sudo mkdir $MISP_USER_HOME /.cache
sudo chown $MISP_USER :$MISP_USER $MISP_USER_HOME /.cache
sudo chown ${ WWW_USER } :${ WWW_USER } /var/www/.cache
## Not really needed...
## debug "Generating rc.local"
## genRCLOCAL
debug "Setting up main MISP virtualenv"
# Needs virtualenv
${ SUDO_WWW } virtualenv -p python3 ${ PATH_TO_MISP } /venv
## FIXME: The current stat of misp-dashboard is broken, disabling any use.
##debug "Installing MISP dashboard"
##mispDashboard
debug "Installing python-cybox"
cd ${ PATH_TO_MISP } /app/files/scripts/python-cybox
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install .
debug "Installing python-stix"
cd ${ PATH_TO_MISP } /app/files/scripts/python-stix
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install .
debug "Install maec"
cd ${ PATH_TO_MISP } /app/files/scripts/python-maec
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install .
# install STIX2.0 library to support STIX 2.0 export
debug "Installing cti-python-stix2"
# install STIX2.0 library to support STIX 2.0 export:
cd ${ PATH_TO_MISP } /cti-python-stix2
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install .
debug "Installing mixbox"
cd ${ PATH_TO_MISP } /app/files/scripts/mixbox
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install .
# install PyMISP
debug "Installing PyMISP"
cd ${ PATH_TO_MISP } /PyMISP
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install .
# install pydeep
false; while [ [ $? -ne 0 ] ] ; do ${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install git+https://github.com/kbandla/pydeep.git; done
# install lief
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install lief
# install python-magic
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install python-magic
# install plyara
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install plyara
# install zmq needed by mispzmq
${ SUDO_WWW } ${ PATH_TO_MISP } /venv/bin/pip install zmq
debug "Installing cake"
composer
${ SUDO_WWW } cp -fa ${ PATH_TO_MISP } /INSTALL/setup/config.php ${ PATH_TO_MISP } /app/Plugin/CakeResque/Config/config.php
sudo chown -R ${ WWW_USER } :${ WWW_USER } ${ PATH_TO_MISP }
sudo chmod -R 750 ${ PATH_TO_MISP }
sudo chmod -R g+ws ${ PATH_TO_MISP } /app/tmp
sudo chmod -R g+ws ${ PATH_TO_MISP } /app/files
sudo chmod -R g+ws ${ PATH_TO_MISP } /app/files/scripts/tmp
debug "Generating Certificate"
sudo openssl req -newkey rsa:4096 -days 365 -nodes -x509 \
-subj " /C= ${ OPENSSL_C } /ST= ${ OPENSSL_ST } /L= ${ OPENSSL_L } /O= ${ OPENSSL_O } /OU= ${ OPENSSL_OU } /CN= ${ OPENSSL_CN } /emailAddress= ${ OPENSSL_EMAILADDRESS } " \
-keyout /etc/ssl/private/misp.local.key -out /etc/ssl/private/misp.local.crt
debug "Generating Apache Conf"
genApacheConf
echo "127.0.0.1 misp.local" | sudo tee -a /etc/hosts
debug "Disabling site default-ssl, enabling misp-ssl"
sudo a2dissite default-ssl
sudo a2ensite misp-ssl
for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
do
sudo sed -i " s/^\( $key \).*/\1 = $( eval echo \$ { $key } ) / " $PHP_INI
done
debug "Restarting Apache2"
sudo systemctl restart apache2
debug "Setting up logrotate"
sudo cp ${ PATH_TO_MISP } /INSTALL/misp.logrotate /etc/logrotate.d/misp
sudo chmod 0640 /etc/logrotate.d/misp
${ SUDO_WWW } cp -a ${ PATH_TO_MISP } /app/Config/bootstrap.default.php ${ PATH_TO_MISP } /app/Config/bootstrap.php
${ SUDO_WWW } cp -a ${ PATH_TO_MISP } /app/Config/core.default.php ${ PATH_TO_MISP } /app/Config/core.php
${ SUDO_WWW } cp -a ${ PATH_TO_MISP } /app/Config/config.default.php ${ PATH_TO_MISP } /app/Config/config.php
sudo chown -R ${ WWW_USER } :${ WWW_USER } ${ PATH_TO_MISP } /app/Config
sudo chmod -R 750 ${ PATH_TO_MISP } /app/Config
debug "Setting up GnuPG"
setupGnuPG
debug "Adding workers to systemd"
backgroundWorkers
debug "Running Core Cake commands"
coreCAKE
## FIXME: The current state of misp-dashboard is broken, disabling any use.
##dashboardCAKE
debug "Update: Galaxies, Template Objects, Warning Lists, Notice Lists, Taxonomies"
updateGOWNT
# This is not needed atm...
##gitPullAllRCLOCAL
checkUsrLocalSrc
debug "Installing misp-modules"
mispmodules
## FIXME: The current state of Viper is broken, disabling any use.
##debug "Installing Viper"
##viper
debug "Installing ssdeep"
ssdeep
sudo phpenmod -v 7.3 ssdeep
debug "Setting permissions"
permissions
debug "Running Then End!"
theEnd
}
# End installMISPonKali ()
# Main Install on RHEL function
installMISPRHEL ( ) {
if [ [ -n $SSDEEP ] ] || [ [ -n $MAIL2 ] ] ; then
echo "RHEL installation currently only supports Core and Modules"
echo "Ignoring other options..."
fi
if [ [ -n $CORE ] ] || [ [ -n $ALL ] ] ; then
space
echo " Proceeding with MISP core installation on RHEL ${ dist_version } "
space
id -u " ${ MISP_USER } " > /dev/null
if [ [ $? -eq 1 ] ] ; then
debug "Creating MISP user"
sudo useradd -r " ${ MISP_USER } "
fi
debug "Enabling Extras Repos (SCL)"
if [ [ " ${ FLAVOUR } " = = "rhel" ] ] ; then
sudo subscription-manager register --auto-attach
enableReposRHEL
enableEPEL
else # CentOS
centosEPEL
fi
debug "Installing System Dependencies"
yumInstallCoreDeps
debug "Enabling Haveged for additional entropy"
sudo yum install haveged -y
sudo systemctl enable --now haveged.service
debug "Installing MISP code"
installCoreRHEL
debug "Install Cake PHP"
installCake_RHEL
debug "Setting File permissions"
permissions_RHEL
debug "Configuring Apache"
apacheConfig_RHEL
debug "Setting up firewall"
firewall_RHEL
debug "Enabling log rotation"
logRotation_RHEL
debug "Configuring MISP"
configMISP_RHEL
debug "Setting up background workers"
configWorkersRHEL
debug "Optimizing Cake Installation"
coreCAKE
debug "Updating tables"
updateGOWNT
echo "Core Intallation finished, check on port 443 to see the Web UI"
fi
if [ [ -n $MODULES ] ] || [ [ -n $ALL ] ] ; then
space
echo "Installing MISP Modules"
space
mispmodulesRHEL
echo "MISP modules installation finished."
fi
}
# End installMISPRHEL ()
## End Function Section ##
colors
debug "Checking if we are run as the installer template"
if [ [ " $0 " = = "./INSTALL.tpl.sh" || " $( echo $0 | grep -o -e 'INSTALL.tpl.sh' ) " = = "INSTALL.tpl.sh" ] ] ; then
generateInstaller
fi
debug "Checking Linux distribution and flavour..."
checkFlavour
debug "Checking if we are uptodate and checksums match"
checkInstaller
space
debug "Setting MISP variables"
MISPvars
debug "Checking for parameters or Unattended Kali Install"
if [ [ $# -eq 0 && " $0 " != "/tmp/misp-kali.sh" ] ] ; then
usage
exit
else
debug "Setting install options with given parameters."
# The setOpt/checkOpt function lives in generic/supportFunctions.md
setOpt $@
checkOpt core && echo " ${ LBLUE } MISP ${ NC } ${ GREEN } core ${ NC } selected "
checkOpt viper && echo " ${ GREEN } Viper ${ NC } selected "
checkOpt modules && echo " ${ LBLUE } MISP ${ NC } ${ GREEN } modules ${ NC } selected "
checkOpt dashboard && echo " ${ LBLUE } MISP ${ NC } ${ GREEN } dashboard ${ NC } selected "
checkOpt mail2 && echo " ${ GREEN } Mail 2 ${ NC } ${ LBLUE } MISP ${ NC } selected "
checkOpt all && echo " ${ GREEN } All options ${ NC } selected "
checkOpt pre && echo " ${ GREEN } Pre-flight checks ${ NC } selected "
checkOpt unattended && echo " ${ GREEN } unattended ${ NC } install selected "
checkOpt upgrade && echo " ${ GREEN } upgrade ${ NC } install selected "
checkOpt force && echo " ${ GREEN } force ${ NC } install selected "
# Check if at least core is selected if no other options that do not require core are set
if [ [ " $CORE " != "1" && " $ALL " != "1" && " $UPGRADE " != "1" && " $PRE " != "1" && " $0 " != "/tmp/misp-kali.sh" ] ] ; then
space
usage
echo "You need to at least select core, or -A to install everything."
echo " $0 -c # Is the minima for install options "
exit 1
fi
fi
# Add upgrade option to do upgrade pre flight
[ [ -n $PRE ] ] && preInstall
[ [ -n $UPGRADE ] ] && upgrade
[ [ -n $NUKE ] ] && nuke && exit
# TODO: Move support map to top
SUPPORT_MAP = "
x86_64-centos-7
x86_64-rhel-7
x86_64-fedora-30
x86_64-debian-stretch
x86_64-debian-buster
x86_64-ubuntu-bionic
x86_64-ubuntu-focal
x86_64-ubuntu-hirsute
x86_64-kali-2020.4
armv6l-raspbian-stretch
armv7l-raspbian-stretch
armv7l-debian-jessie
armv7l-debian-stretch
armv7l-debian-buster
armv7l-ubuntu-bionic
armv7l-ubuntu-focal
"
# Check if we actually support this configuration
if ! echo " $SUPPORT_MAP " | grep " $( uname -m) - $FLAVOUR - $dist_version " >/dev/null; then
cat >& 2 <<-'EOF'
Either your platform is not easily detectable or is not supported by this
installer script.
Please visit the following URL for more detailed installation instructions:
https://misp.github.io/MISP/
EOF
exit 1
fi
# If Ubuntu is detected, figure out which release it is and run the according scripts
if [ [ " ${ FLAVOUR } " = = "ubuntu" ] ] ; then
RELEASE = $( lsb_release -s -r| tr '[:upper:]' '[:lower:]' )
if [ [ " ${ RELEASE } " = = "18.04" ] ] ; then
echo "Install on Ubuntu 18.04 LTS fully supported."
echo "Please report bugs/issues here: https://github.com/MISP/MISP/issues"
installSupported && exit || exit
fi
if [ [ " ${ RELEASE } " = = "20.04" ] ] ; then
echo "Install on Ubuntu 20.04 LTS fully supported."
echo "Please report bugs/issues here: https://github.com/MISP/MISP/issues"
installSupported PHP = "7.4" && exit || exit
fi
if [ [ " ${ RELEASE } " = = "21.04" ] ] ; then
echo "Install on Ubuntu 21.04 LTS fully supported."
echo "Please report bugs/issues here: https://github.com/MISP/MISP/issues"
installSupported PHP = "7.4" && exit || exit
fi
if [ [ " ${ RELEASE } " = = "18.10" ] ] ; then
echo "Install on Ubuntu 18.10 partially supported, bye."
echo "Please report bugs/issues here: https://github.com/MISP/MISP/issues"
installSupported && exit || exit
fi
if [ [ " ${ RELEASE } " = = "19.04" ] ] ; then
echo "Install on Ubuntu 19.04 partially supported bye."
echo "Please report bugs/issues here: https://github.com/MISP/MISP/issues"
installSupported && exit || exit
exit 1
fi
if [ [ " ${ RELEASE } " = = "19.10" ] ] ; then
echo "Install on Ubuntu 19.10 not supported, bye"
exit 1
fi
echo "Installation done!"
exit
fi
# If Debian is detected, figure out which release it is and run the according scripts
if [ [ " ${ FLAVOUR } " = = "debian" ] ] ; then
CODE = $( lsb_release -s -c| tr '[:upper:]' '[:lower:]' )
if [ [ " ${ CODE } " = = "buster" ] ] ; then
echo "Install on Debian testing fully supported."
echo "Please report bugs/issues here: https://github.com/MISP/MISP/issues"
installSupported PHP = 7.3 && exit || exit
fi
if [ [ " ${ CODE } " = = "sid" ] ] ; then
echo "Install on Debian unstable not fully supported."
echo "Please report bugs/issues here: https://github.com/MISP/MISP/issues"
installSupported PHP = 7.3 && exit || exit
fi
if [ [ " ${ CODE } " = = "stretch" ] ] ; then
echo "Install on Debian stable fully supported."
echo "Please report bugs/issues here: https://github.com/MISP/MISP/issues"
installSupported PHP = 7.0 && exit || exit
fi
echo "Installation done!"
exit 0
fi
# If Tsurugi is detected, figure out which release it is and run the according scripts
if [ [ " ${ FLAVOUR } " = = "tsurugi" ] ] ; then
CODE = $( lsb_release -s -c| tr '[:upper:]' '[:lower:]' )
if [ [ " ${ CODE } " = = "bamboo" ] ] ; then
echo "Install on Tsurugi Lab partially supported."
echo "Please report bugs/issues here: https://github.com/MISP/MISP/issues"
fi
if [ [ " ${ CODE } " = = "soy sauce" ] ] ; then
echo "Install on Tsurugi Acquire partially supported."
echo "Please report bugs/issues here: https://github.com/MISP/MISP/issues"
fi
echo "Installation done!"
exit 0
fi
# If Kali Linux is detected, run the acccording scripts
if [ [ " ${ FLAVOUR } " = = "kali" ] ] ; then
KALI = 1
kaliOnTheR0ckz
installMISPonKali
echo "Installation done!"
exit
fi
# If RHEL/CentOS is detected, run appropriate script
if [ [ " ${ FLAVOUR } " = = "rhel" ] ] || [ [ " ${ FLAVOUR } " = = "centos" ] ] ; then
installMISPRHEL
echo "Installation done !"
exit
fi
