This PR adds a common configuration section for all modules (see docs). These modules are then loaded at startup by the homeserver. Modules register their hooks and web resources using the new `register_[...]_callbacks` and `register_web_resource` methods of the module API.
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
At the moment, if you'd like to share presence between local or remote users, those users must be sharing a room together. This isn't always the most convenient or useful situation though.
This PR adds a module to Synapse that will allow deployments to set up extra logic on where presence updates should be routed. The module must implement two methods, `get_users_for_states` and `get_interested_users`. These methods are given presence updates or user IDs and must return information that Synapse will use to grant passing presence updates around.
A method is additionally added to `ModuleApi` which allows triggering a set of users to receive the current, online presence information for all users they are considered interested in. This is the equivalent of that user receiving presence information during an initial sync.
The goal of this module is to be fairly generic and useful for a variety of applications, with hard requirements being:
* Sending state for a specific set or all known users to a defined set of local and remote users.
* The ability to trigger an initial sync for specific users, so they receive all current state.
This bug was discovered by DINUM. We were modifying `serialized_event["content"]`, which - if you've got `USE_FROZEN_DICTS` turned on or are [using a third party rules module](17cd48fe51/synapse/events/third_party_rules.py (L73-L76)) - will raise a 500 if you try to a edit a reply to a message.
`serialized_event["content"]` could be set to the edit event's content, instead of a copy of it, which is bad as we attempt to modify it. Instead, we also end up modifying the original event's content. DINUM uses a third party rules module, which meant the event's content got frozen and thus an exception was raised.
To be clear, the problem is not that the event's content was frozen. In fact doing so helped us uncover the fact we weren't copying event content correctly.
* Populate `internal_metadata.outlier` based on `events` table
Rather than relying on `outlier` being in the `internal_metadata` column,
populate it based on the `events.outlier` column.
* Move `outlier` out of InternalMetadata._dict
Ultimately, this will allow us to stop writing it to the database. For now, we
have to grandfather it back in so as to maintain compatibility with older
versions of Synapse.
Fixes https://github.com/matrix-org/synapse/issues/9572
When a SSO user logs in for the first time, we create a local Matrix user for them. This goes through the register_user flow, which ends up triggering the spam checker. Spam checker modules don't currently have any way to differentiate between a user trying to sign up initially, versus an SSO user (whom has presumably already been approved elsewhere) trying to log in for the first time.
This PR passes `auth_provider_id` as an argument to the `check_registration_for_spam` function. This argument will contain an ID of an SSO provider (`"saml"`, `"cas"`, etc.) if one was used, else `None`.
- Update black version to the latest
- Run black auto formatting over the codebase
- Run autoformatting according to [`docs/code_style.md
`](80d6dc9783/docs/code_style.md)
- Update `code_style.md` docs around installing black to use the correct version
`distutils` is pretty much deprecated these days, and replaced with
`setuptools`. It's also annoying because it's you can't `pip install` it, and
it's hard to figure out which debian package we should depend on to make sure
it's there.
Since we only use it for a tiny function anyway, let's just vendor said
function into our codebase.
otherwise non-state events get written as `<FrozenEvent ... state_key='None'>`
which is indistinguishable from state events with the actual state_key `None`.
Lots of different module apis is not easy to maintain.
Rather than adding yet another ModuleApi(hs, hs.get_auth_handler()) incantation, first add an hs.get_module_api() method and use it where possible.
* Optimise and test state fetching for 3p event rules
Getting all the events at once is much more efficient than getting them
individually
* Test that 3p event rules can modify events
PR #8292 tried to maintain backwards compat with modules which don't provide a
`check_visibility_can_be_modified` method, but the tests weren't being run,
and the check didn't work.
This PR allows `ThirdPartyEventRules` modules to view, manipulate and block changes to the state of whether a room is published in the public rooms directory.
While the idea of whether a room is in the public rooms list is not kept within an event in the room, `ThirdPartyEventRules` generally deal with controlling which modifications can happen to a room. Public rooms fits within that idea, even if its toggle state isn't controlled through a state event.
There's no need for it to be in the dict as well as the events table. Instead,
we store it in a separate attribute in the EventInternalMetadata object, and
populate that on load.
This means that we can rely on it being correctly populated for any event which
has been persited to the database.
This is a bit fiddly because it all has to be done on one fell swoop:
* Wherever we create a new event, pass in the room version (and check it matches the format version)
* When we prune an event, use the room version of the unpruned event to create the pruned version.
* When we pass an event over the replication protocol, pass the room version over alongside it, and use it when deserialising the event again.
There are quite a few places that we assume that a redaction event has a
corresponding `redacts` key, which is not always the case. So lets
cheekily make it so that event.redacts just returns None instead.
Fixes a bug where rejected events were persisted with the wrong state group.
Also fixes an occasional internal-server-error when receiving events over
federation which are rejected and (possibly because they are
backwards-extremities) have no prev_group.
Fixes#6289.
* Raise an exception if accessing state for rejected events
Add some sanity checks on accessing state_group etc for
rejected events.
* Skip calculating push actions for rejected events
It didn't actually cause any bugs, because rejected events get filtered out at
various later points, but there's not point in trying to calculate the push
actions for a rejected event.
The intention here is to make it clearer which fields we can expect to be
populated when: notably, that the _event_type etc aren't used for the
synchronous impl of EventContext.
* Offer the homeserver instance to the spam checker
* Newsfile
* Linting
* Expose a Spam Checker API instead of passing the homeserver object
* Alter changelog
* s/hs/api
Adds new config option `cleanup_extremities_with_dummy_events` which
periodically sends dummy events to rooms with more than 10 extremities.
THIS IS REALLY EXPERIMENTAL.
If we remove support for a particular room version, we should behave more
gracefully. This should make client requests fail with a 400 rather than a 500,
and will ignore individiual PDUs in a federation transaction, rather than the
whole transaction.
The validator was being run on the EventBuilder objects, and so the
validator only checked a subset of fields. With the upcoming
EventBuilder refactor even fewer fields will be there to validate.
To get around this we split the validation into those that can be run
against an EventBuilder and those run against a fully fledged event.
This is in preparation for making EventBuilder format agnostic, which
means event signing should be done against the event dict rather than
the EventBuilder object.
Currently we only have the one event format version defined, but this
adds the necessary infrastructure to persist and fetch the format
versions alongside the events.
We specify the format version rather than the room version as:
1. We don't necessarily know the room version, existing events may be
either v1 or v2.
2. We'd need to be careful to prevent/handle correctly if different
events in the same room reported to be of different versions, which
sounds annoying.
If we receive an event that doesn't pass their content hash check (e.g.
due to already being redacted) then we hit a bug which causes an
exception to be raised, which then promplty stops the event (and
request) from being processed.
This effects all sorts of federation APIs, including joining rooms with
a redacted state event.
We don't want to bother pulling out the current state from the DB since
until we know we have to. Checking the context for state is just an
optimisation.
They raised KeyError before. I'm changing this because the code uses
hasattr() to check for the presence of a key. This worked accidentally
before, because hasattr() silences all exceptions in python 2. However,
in python3, this isn't the case anymore.
I had a look around to see if anything depended on this raising a
KeyError and I couldn't find anything. Of course, I could have simply
missed it.
Signed-off-by: Adrian Tschira <nota@notafile.com>
* Split state group persist into seperate storage func
* Add per database engine code for state group id gen
* Move store_state_group to StateReadStore
This allows other workers to use it, and so resolve state.
* Hook up store_state_group
* Fix tests
* Rename _store_mult_state_groups_txn
* Rename StateGroupReadStore
* Remove redundant _have_persisted_state_group_txn
* Update comments
* Comment compute_event_context
* Set start val for state_group_id_seq
... otherwise we try to recreate old state groups
* Update comments
* Don't store state for outliers
* Update comment
* Update docstring as state groups are ints
A few non-functional changes:
* A bunch of docstrings to document types
* Split `EventsStore._persist_events_txn` up a bit. Hopefully it's a bit more
readable.
* Rephrase `EventFederationStore._update_min_depth_for_room_txn` to avoid
mind-bending conditional.
* Rephrase rejected/outlier conditional in `_update_outliers_txn` to avoid
mind-bending conditional.
Move the checks for whether an event is new state inside persist
event itself.
This was harder than expected because there wasn't enough information
passed to persist event to correctly handle invites from remote servers
for new rooms.
Brendan Abolivier