Previously, we would spin in a tight loop until
`update_state_for_partial_state_event` stopped raising
`FederationPullAttemptBackoffError`s. Replace the spinloop with a wait
until the backoff period has expired.
Signed-off-by: Sean Quah <seanq@matrix.org>
Fixes#12801.
Complement tests are at
https://github.com/matrix-org/complement/pull/567.
Avoid blocking on full state when handling a subsequent join into a
partial state room.
Also always perform a remote join into partial state rooms, since we do
not know whether the joining user has been banned and want to avoid
leaking history to banned users.
Signed-off-by: Mathieu Velten <mathieuv@matrix.org>
Co-authored-by: Sean Quah <seanq@matrix.org>
Co-authored-by: David Robertson <davidr@element.io>
The per-room account data is no longer unconditionally
fetched, even if all rooms will be filtered out.
Global account data will not be fetched if it will all be
filtered out.
If a sync request does not need to calculate per-room entries &
is not generating presence & is not generating device list data
(e.g. during initial sync) avoid the expensive calculation of room
specific data.
This is a micro-optimisation for clients syncing simply to receive
to-device information.
MSC3952 defines push rules which searches for mentions in a list of
Matrix IDs in the event body, instead of searching the entire event
body for display name / local part.
This is implemented behind an experimental configuration flag and
does not yet implement the backwards compatibility pieces of the MSC.
This has two related changes:
* It enables fast-path processing for an empty filter (`[]`) which was
previously only used for wildcard not-filters (`["*"]`).
* It special cases a `/sync` filter with no-rooms to skip all room
processing, previously we would partially skip processing, but would
generally still calculate intermediate values for each room which were
then unused.
Future changes might consider further optimizations:
* Skip calculating per-room account data when all rooms are filtered (currently
this is thrown away).
* Make similar improvements to other endpoints which support filters.
A batch of changes intended to make it easier to trace to-device messages through the system.
The intention here is that a client can set a property org.matrix.msgid in any to-device message it sends. That ID is then included in any tracing or logging related to the message. (Suggestions as to where this field should be documented welcome. I'm not enthusiastic about speccing it - it's very much an optional extra to help with debugging.)
I've also generally improved the data we send to opentracing for these messages.
* Add support for MSC3931: Room Version Supports push rule condition
* Create experimental flag for future work, and use it to gate MSC3931
* Changelog entry
Remove type hints from comments which have been added
as Python type hints. This helps avoid drift between comments
and reality, as well as removing redundant information.
Also adds some missing type hints which were simple to fill in.
For forward compatibility, Synapse needs to ignore fields it does not
recognise instead of raising an error.
Fixes#14365.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Introduce a test for the old behaviour which we want to restore
* Reintroduce the old behaviour in a simpler way
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Use 1 credit instead of 2 for creating a room: be more lenient than before
Notably, the UI in Element Web was still broken after restoring to prior behaviour.
After discussion, we agreed that it would be sensible to increase the limit.
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
While https://github.com/matrix-org/synapse/pull/13635 stops us from doing the slow thing after we've already done it once, this PR stops us from doing one of the slow things in the first place.
Related to
- https://github.com/matrix-org/synapse/issues/13622
- https://github.com/matrix-org/synapse/pull/13635
- https://github.com/matrix-org/synapse/issues/13676
Part of https://github.com/matrix-org/synapse/issues/13356
Follow-up to https://github.com/matrix-org/synapse/pull/13815 which tracks event signature failures.
With this PR, we avoid the call to the costly `_get_state_ids_after_missing_prev_event` because the signature failure will count as an attempt before and we filter events based on the backoff before calling `_get_state_ids_after_missing_prev_event` now.
For example, this will save us 156s out of the 185s total that this `matrix.org` `/messages` request. If you want to see the full Jaeger trace of this, you can drag and drop this `trace.json` into your own Jaeger, https://gist.github.com/MadLittleMods/4b12d0d0afe88c2f65ffcc907306b761
To explain this exact scenario around `/messages` -> backfill, we call `/backfill` and first check the signatures of the 100 events. We see bad signature for `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` and `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` (both member events). Then we process the 98 events remaining that have valid signatures but one of the events references `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` as a `prev_event`. So we have to do the whole `_get_state_ids_after_missing_prev_event` rigmarole which pulls in those same events which fail again because the signatures are still invalid.
- `backfill`
- `outgoing-federation-request` `/backfill`
- `_check_sigs_and_hash_and_fetch`
- `_check_sigs_and_hash_and_fetch_one` for each event received over backfill
- ❗ `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` fails with `Signature on retrieved event was invalid.`: `unable to verify signature for sender domain xxx: 401: Failed to find any key to satisfy: _FetchKeyRequest(...)`
- ❗ `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` fails with `Signature on retrieved event was invalid.`: `unable to verify signature for sender domain xxx: 401: Failed to find any key to satisfy: _FetchKeyRequest(...)`
- `_process_pulled_events`
- `_process_pulled_event` for each validated event
- ❗ Event `$Q0iMdqtz3IJYfZQU2Xk2WjB5NDF8Gg8cFSYYyKQgKJ0` references `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` as a `prev_event` which is missing so we try to get it
- `_get_state_ids_after_missing_prev_event`
- `outgoing-federation-request` `/state_ids`
- ❗ `get_pdu` for `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` which fails the signature check again
- ❗ `get_pdu` for `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` which fails the signature check
When retrieving counts of notifications segment the results based on the
thread ID, but choose whether to return them as individual threads or as
a single summed field by letting the client opt-in via a sync flag.
The summarization code is also updated to be per thread, instead of per
room.
Part of #13019
This changes all the permission-related methods to rely on the Requester instead of the UserID. This is a first step towards enabling scoped access tokens at some point, since I expect the Requester to have scope-related informations in it.
It also changes methods which figure out the user/device/appservice out of the access token to return a Requester instead of something else. This avoids having store-related objects in the methods signatures.
This adds support for the stable identifiers of MSC2285 while
continuing to support the unstable identifiers behind the configuration
flag. These will be removed in a future version.
This simplifies the access token verification logic by removing the `rights`
parameter which was only ever used for the unsubscribe link in email
notifications. The latter has been moved under the `/_synapse` namespace,
since it is not a standard API.
This also makes the email verification link more secure, by embedding the
app_id and pushkey in the macaroon and verifying it. This prevents the user
from tampering the query parameters of that unsubscribe link.
Macaroon generation is refactored:
- Centralised all macaroon generation and verification logic to the
`MacaroonGenerator`
- Moved to `synapse.utils`
- Changed the constructor to require only a `Clock`, hostname, and a secret key
(instead of a full `Homeserver`).
- Added tests for all methods.
* Update worker docs to remove group endpoints.
* Removes an unused parameter to `ApplicationService`.
* Break dependency between media repo and groups.
* Avoid copying `m.room.related_groups` state events during room upgrades.
Makes it so that groups/communities no longer exist from a user-POV. E.g. we remove:
* All API endpoints (including Client-Server, Server-Server, and admin).
* Documented configuration options (and the experimental flag, which is now unused).
* Special handling during room upgrades.
* The `groups` section of the `/sync` response.
getClientIP was deprecated in Twisted 18.4.0, which also added
getClientAddress. The Synapse minimum version for Twisted is
currently 18.9.0, so all supported versions have the new API.
* Changes hidden read receipts to be a separate receipt type
(instead of a field on `m.read`).
* Updates the `/receipts` endpoint to accept `m.fully_read`.
The unstable identifiers are still supported if the experimental configuration
flag is enabled. The unstable identifiers will be removed in a future release.
* Fix `PushRuleEvaluator` to work on frozendicts
frozendicts do not (necessarily) inherit from dict, so this needs to handle
them correctly.
* Fix event filtering for frozen events
Looks like this one was introduced by #11194.
Currently when puppeting another user, the user doing the puppeting is
tracked for client IPs and MAU (if configured).
When tracking MAU is important, it becomes necessary to be possible to
also track the client IPs and MAU of puppeted users. As an example a
client that manages user creation and creation of tokens via the Synapse
admin API, passing those tokens for the client to use.
This PR adds optional configuration to enable tracking of puppeted users
into monthly active users. The default behaviour stays the same.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
* Wrap `auth.get_user_by_req` in an opentracing span
give `get_user_by_req` its own opentracing span, since it can result in a
non-trivial number of sub-spans which it is useful to group together.
This requires a bit of reorganisation because it also sets some tags (and may
force tracing) on the servlet span.
* Emit opentracing span for encoding json responses
This can be a significant time sink.
* Rename all sync spans with a prefix
* Write an opentracing span for encoding sync response
* opentracing span to group generate_room_entries
* opentracing spans within sync.encode_response
* changelog
* Use the `trace` decorator instead of context managers
This change makes mypy complain if the constants are ever reassigned,
and, more usefully, makes mypy type them as `Literal`s instead of `str`s,
allowing code of the following form to pass mypy:
```py
def do_something(membership: Literal["join", "leave"], ...): ...
do_something(Membership.JOIN, ...)
```
The shared ratelimit function was replaced with a dedicated
RequestRatelimiter class (accessible from the HomeServer
object).
Other properties were copied to each sub-class that inherited
from BaseHandler.
This fixes a "Event not signed by authorising server" error when
transition room member from join -> join, e.g. when updating a
display name or avatar URL for restricted rooms.
If the MAU count had been reached, Synapse incorrectly blocked appservice users even though they've been explicitly configured not to be tracked (the default). This was due to bypassing the relevant if as it was chained behind another earlier hit if as an elif.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
Patrick Cloke