This implements refresh tokens, as defined by MSC2918
This MSC has been implemented client side in Hydrogen Web: vector-im/hydrogen-web#235
The basics of the MSC works: requesting refresh tokens on login, having the access tokens expire, and using the refresh token to get a new one.
Signed-off-by: Quentin Gliech <quentingliech@gmail.com>
Implemented config option sso.update_profile_information to keep user's display name in sync with the SSO displayname.
Signed-off-by: Johannes Kanefendt <johannes.kanefendt@krzn.de>
We were repeatedly looking up a config option in a loop (using the
unclassed config style), which is expensive enough that it can cause
large CPU usage.
This PR adds a common configuration section for all modules (see docs). These modules are then loaded at startup by the homeserver. Modules register their hooks and web resources using the new `register_[...]_callbacks` and `register_web_resource` methods of the module API.
Dangerous actions means deactivating an account, modifying an account
password, or adding a 3PID.
Other actions (deleting devices, uploading keys) can re-use the same UI
auth session if ui_auth.session_timeout is configured.
* Room version 7 for knocking.
* Stable prefixes and endpoints (both client and federation) for knocking.
* Removes the experimental configuration flag.
Add 'federation_ip_range_whitelist'. This allows backwards-compatibility, If 'federation_ip_range_blacklist' is set. Otherwise 'ip_range_whitelist' will be used for federation servers.
Signed-off-by: Michael Kutzner 1mikure@gmail.com
MSC1772 specifies the m.room.create event should be sent as part
of the invite_state. This was done optionally behind an experimental
flag, but is now done by default due to MSC1772 being approved.
Now that cross signing exists there is much less of a need for other people to look at devices and verify them individually. This PR adds a config option to allow you to prevent device display names from being shared with other servers.
Signed-off-by: Aaron Raimist <aaron@raim.ist>
* tests for push rule pattern matching
* tests for acl pattern matching
* factor out common `re.escape`
* Factor out common re.compile
* Factor out common anchoring code
* add word_boundary support to `glob_to_regex`
* Use `glob_to_regex` in push rule evaluator
NB that this drops support for character classes. I don't think anyone ever
used them.
* Improve efficiency of globs with multiple wildcards
The idea here is that we compress multiple `*` globs into a single `.*`. We
also need to consider `?`, since `*?*` is as hard to implement efficiently as
`**`.
* add assertion on regex pattern
* Fix mypy
* Simplify glob_to_regex
* Inline the glob_to_regex helper function
Signed-off-by: Dan Callahan <danc@element.io>
* Moar comments
Signed-off-by: Dan Callahan <danc@element.io>
Co-authored-by: Dan Callahan <danc@element.io>
Synapse can be quite memory intensive, and unless care is taken to tune
the GC thresholds it can end up thrashing, causing noticable performance
problems for large servers. We fix this by limiting how often we GC a
given generation, regardless of current counts/thresholds.
This does not help with the reverse problem where the thresholds are set
too high, but that should only happen in situations where they've been
manually configured.
Adds a `gc_min_seconds_between` config option to override the defaults.
Fixes#9890.
Applied a (slightly modified) patch from https://github.com/matrix-org/synapse/issues/9574.
As far as I understand this would allow the cookie set during the OIDC flow to work on deployments using public baseurls that do not sit at the URL path root.
This attempts to be a direct port of https://github.com/matrix-org/synapse-dinsic/pull/74 to mainline. There was some fiddling required to deal with the changes that have been made to mainline since (mainly dealing with the split of `RegistrationWorkerStore` from `RegistrationStore`, and the changes made to `self.make_request` in test code).
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
At the moment, if you'd like to share presence between local or remote users, those users must be sharing a room together. This isn't always the most convenient or useful situation though.
This PR adds a module to Synapse that will allow deployments to set up extra logic on where presence updates should be routed. The module must implement two methods, `get_users_for_states` and `get_interested_users`. These methods are given presence updates or user IDs and must return information that Synapse will use to grant passing presence updates around.
A method is additionally added to `ModuleApi` which allows triggering a set of users to receive the current, online presence information for all users they are considered interested in. This is the equivalent of that user receiving presence information during an initial sync.
The goal of this module is to be fairly generic and useful for a variety of applications, with hard requirements being:
* Sending state for a specific set or all known users to a defined set of local and remote users.
* The ability to trigger an initial sync for specific users, so they receive all current state.
The regex should be terminated so that subdomain matches of another
domain are not accepted. Just ensuring that someone doesn't shoot
themselves in the foot by copying our example.
Signed-off-by: Denis Kasak <dkasak@termina.org.uk>
`room_invite_state_types` was inconvenient as a configuration setting, because
anyone that ever set it would not receive any new types that were added to the
defaults. Here, we deprecate the old setting, and replace it with a couple of
new settings under `room_prejoin_state`.
I've reiterated the advice about using `oidc` to migrate, since I've seen a few
people caught by this.
I've also removed a couple of the examples as they are duplicating the OIDC
documentation, and I think they might be leading people astray.
Running `dmypy run` will do a `mypy` check while spinning up a daemon
that makes rerunning `dmypy run` a lot faster.
`dmypy` doesn't support `follow_imports = silent` and has
`local_partial_types` enabled, so this PR enables those options and
fixes the issues that were newly raised. Note that `local_partial_types`
will be enabled by default in upcoming mypy releases.
* Split ShardedWorkerHandlingConfig
This is so that we have a type level understanding of when it is safe to
call `get_instance(..)` (as opposed to `should_handle(..)`).
* Remove special cases in ShardedWorkerHandlingConfig.
`ShardedWorkerHandlingConfig` tried to handle the various different ways
it was possible to configure federation senders and pushers. This led to
special cases that weren't hit during testing.
To fix this the handling of the different cases is moved from there and
`generic_worker` into the worker config class. This allows us to have
the logic in one place and allows the rest of the code to ignore the
different cases.
This PR adds a homeserver config option, `user_directory.prefer_local_users`, that when enabled will show local users higher in user directory search results than remote users. This option is off by default.
Note that turning this on doesn't necessarily mean that remote users will always be put below local users, but they should be assuming all other ranking factors (search query match, profile information present etc) are identical.
This is useful for, say, University networks that are openly federating, but want to prioritise local students and staff in the user directory over other random users.
Add off-by-default configuration settings to:
- disable putting an invitee's profile info in invite events
- disable profile lookup via federation
Signed-off-by: Andrew Ferrazzutti <fair@miscworks.net>
- Update black version to the latest
- Run black auto formatting over the codebase
- Run autoformatting according to [`docs/code_style.md
`](80d6dc9783/docs/code_style.md)
- Update `code_style.md` docs around installing black to use the correct version
==============================
Features
--------
- Further improvements to the user experience of registration via single sign-on. ([\#9297](https://github.com/matrix-org/synapse/issues/9297))
Bugfixes
--------
- Fix ratelimiting introduced in v1.27.0rc1 for invites to respect the `ratelimit` flag on application services. ([\#9302](https://github.com/matrix-org/synapse/issues/9302))
- Do not automatically calculate `public_baseurl` since it can be wrong in some situations. Reverts behaviour introduced in v1.26.0. ([\#9313](https://github.com/matrix-org/synapse/issues/9313))
Improved Documentation
----------------------
- Clarify the sample configuration for changes made to the template loading code. ([\#9310](https://github.com/matrix-org/synapse/issues/9310))
-----BEGIN PGP SIGNATURE-----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=NSyp
-----END PGP SIGNATURE-----
Merge tag 'v1.27.0rc2' into develop
Synapse 1.27.0rc2 (2021-02-11)
==============================
Features
--------
- Further improvements to the user experience of registration via single sign-on. ([\#9297](https://github.com/matrix-org/synapse/issues/9297))
Bugfixes
--------
- Fix ratelimiting introduced in v1.27.0rc1 for invites to respect the `ratelimit` flag on application services. ([\#9302](https://github.com/matrix-org/synapse/issues/9302))
- Do not automatically calculate `public_baseurl` since it can be wrong in some situations. Reverts behaviour introduced in v1.26.0. ([\#9313](https://github.com/matrix-org/synapse/issues/9313))
Improved Documentation
----------------------
- Clarify the sample configuration for changes made to the template loading code. ([\#9310](https://github.com/matrix-org/synapse/issues/9310))
There's some prelimiary work here to pull out the construction of a jinja environment to a separate function.
I wanted to load the template at display time rather than load time, so that it's easy to update on the fly. Honestly, I think we should do this with all our templates: the risk of ending up with malformed templates is far outweighed by the improved turnaround time for an admin trying to update them.
We've decided to add a 'brand' field to help clients decide how to style the
buttons.
Also, fix up the allowed characters for idp_id, while I'm in the area.
This is the final step for supporting multiple OIDC providers concurrently.
First of all, we reorganise the config so that you can specify a list of OIDC providers, instead of a single one. Before:
oidc_config:
enabled: true
issuer: "https://oidc_provider"
# etc
After:
oidc_providers:
- idp_id: prov1
issuer: "https://oidc_provider"
- idp_id: prov2
issuer: "https://another_oidc_provider"
The old format is still grandfathered in.
With that done, it's then simply a matter of having OidcHandler instantiate a new OidcProvider for each configured provider.
`distutils` is pretty much deprecated these days, and replaced with
`setuptools`. It's also annoying because it's you can't `pip install` it, and
it's hard to figure out which debian package we should depend on to make sure
it's there.
Since we only use it for a tiny function anyway, let's just vendor said
function into our codebase.
Again in preparation for handling more than one OIDC provider, add a new caveat to the macaroon used as an OIDC session cookie, which remembers which OIDC provider we are talking to. In future, when we get a callback, we'll need it to make sure we talk to the right IdP.
As part of this, I'm adding an idp_id and idp_name field to the OIDC configuration object. They aren't yet documented, and we'll just use the old values by default.
If a user tries to do UI Auth via SSO, but uses the wrong account on the SSO
IdP, try to give them a better error.
Previously, the UIA would claim to be successful, but then the operation in
question would simply fail with "auth fail". Instead, serve up an error page
which explains the failure.
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes#8876.
The idea is that the parse_config method of extension modules can raise either a ConfigError or a JsonValidationError,
and it will be magically turned into a legible error message. There's a few components to it:
* Separating the "path" and the "message" parts of a ConfigError, so that we can fiddle with the path bit to turn it
into an absolute path.
* Generally improving the way ConfigErrors get printed.
* Passing in the config path to load_module so that it can wrap any exceptions that get caught appropriately.
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
This PR adds a new config option to the `push` section of the homeserver config, `group_unread_count_by_room`. By default Synapse will group push notifications by room (so if you have 1000 unread messages, if they lie in 55 rooms, you'll see an unread count on your phone of 55).
However, it is also useful to be able to send out the true count of unread messages if desired. If `group_unread_count_by_room` is set to `false`, then with the above example, one would see an unread count of 1000 (email anyone?).
This modifies the configuration of structured logging to be usable from
the standard Python logging configuration.
This also separates the formatting of logs from the transport allowing
JSON logs to files or standard logs to sockets.
This converts a few more of our inline HTML templates to Jinja. This is somewhat part of #7280 and should make it a bit easier to customize these in the future.
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
#8037 changed the default `autoescape` option when rendering Jinja2 templates from `False` to `True`. This caused some bugs, noticeably around redirect URLs being escaped in SAML2 auth confirmation templates, causing those URLs to break for users.
This change returns the previous behaviour as it stood. We may want to look at each template individually and see whether autoescaping is a good idea at some point, but for now lets just fix the breakage.
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
We do this to prevent foot guns. The default config uses a MemoryFilter,
but users are free to change to logging to files directly. If they do
then they have to ensure to set the `filters: [context]` on the right
handler, otherwise records get written with the wrong context.
Instead we move the logic to happen when we generate a record, which is
when we *log* rather than *handle*.
(It's possible to add filters to loggers in the config, however they
don't apply to descendant loggers and so they have to be manually set on
*every* logger used in the code base)
* Change default log config to buffer by default.
This batches up writes to the filesystem, which is more efficient for
disk I/O. This means that it can take some time for logs to get written
to disk. Note that ERROR logs (and above) immediately flush the buffer.
This only effects new installs, as we only write the log config if
started with `--generate-config` (in the same way we do for generating
signing keys).
* Default to keeping last 4 days of logs.
This hopefully reduces the amount of logs kept for new servers. Keeping
the last 1GB of logs is likely overkill for new servers, but equally may
not be enough for busy ones.
Instead, we keep the last four days worth of logs, enough so that admins
can investigate any problems that happened over e.g. a long weekend.
The [postgres setup docs](https://github.com/matrix-org/synapse/blob/develop/docs/postgres.md#set-up-database) recommend setting up your database with user `synapse_user`.
However, uncommenting the postgres defaults in the sample config leave you with user `synapse`.
This PR switches the sample config to recommend `synapse_user`. Took a me a second to figure this out, so assume this will beneficial to others.
The CI appears to use the latest version of isort, which is a problem when isort gets a major version bump. Rather than try to pin the version, I've done the necessary to make isort5 happy with synapse.
This requires a new config option to specify which media repo should be
responsible for running background jobs to e.g. clear out expired URL
preview caches.
This ended up being a bit more invasive than I'd hoped for (not helped by
generic_worker duplicating some of the code from homeserver), but hopefully
it's an improvement.
The idea is that, rather than storing unstructured `dict`s in the config for
the listener configurations, we instead parse it into a structured
`ListenerConfig` object.
Fixes https://github.com/matrix-org/synapse/issues/2431
Adds config option `encryption_enabled_by_default_for_room_type`, which determines whether encryption should be enabled with the default encryption algorithm in private or public rooms upon creation. Whether the room is private or public is decided based upon the room creation preset that is used.
Part of this PR is also pulling out all of the individual instances of `m.megolm.v1.aes-sha2` into a constant variable to eliminate typos ala https://github.com/matrix-org/synapse/pull/7637
Based on #7637
While working on https://github.com/matrix-org/synapse/issues/5665 I found myself digging into the `Ratelimiter` class and seeing that it was both:
* Rather undocumented, and
* causing a *lot* of config checks
This PR attempts to refactor and comment the `Ratelimiter` class, as well as encourage config file accesses to only be done at instantiation.
Best to be reviewed commit-by-commit.
* Expose `return_html_error`, and allow it to take a Jinja2 template instead of a raw string
* Clean up exception handling in SAML2ResponseResource
* use the existing code in `return_html_error` instead of re-implementing it
(giving it a jinja2 template rather than inventing a new form of template)
* do the exception-catching in the REST layer rather than in the handler
layer, to make sure we catch all exceptions.
'client_auth_method' commented out value was erronously 'client_auth_basic',
when code and docstring says it should be 'client_secret_basic'.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
* release-v1.13.0:
Don't UPGRADE database rows
RST indenting
Put rollback instructions in upgrade notes
Fix changelog typo
Oh yeah, RST
Absolute URL it is then
Fix upgrade notes link
Provide summary of upgrade issues in changelog. Fix )
Move next version notes from changelog to upgrade notes
Changelog fixes
1.13.0rc1
Documentation on setting up redis (#7446)
Rework UI Auth session validation for registration (#7455)
Fix errors from malformed log line (#7454)
Drop support for redis.dbid (#7450)
If the admin adds a `.yaml` file that's either empty or doesn't parse into a dict to a config directory (e.g. `conf.d` for debs installs), stuff like https://github.com/matrix-org/synapse/issues/7322 would happen. This PR checks that the file is correctly parsed into a dict, or ignores it with a warning if it parses into any other type (including `None` for empty files).
Fixes https://github.com/matrix-org/synapse/issues/7322
I don't really remember why this was so complicated; I think it dates
back to the time when we had to instantiate the Config classes before
we could call `add_arguments` - ie before #5597. In any case, I don't
think there's a good reason for it any more, and the impact of it
being complicated is that `--help` doesn't work correctly.
That fallback sets the redirect URL to itself (so it can process the login
token then return gracefully to the client). This would make it pointless to
ask the user for confirmation, since the URL the confirmation page would be
showing wouldn't be the client's.
If an error happened while processing a SAML AuthN response, or a client
ends up doing a `GET` request to `/authn_response`, then render a
customisable error page rather than a confusing error.
Jonathan de Jong