* Make historical messages available to federated servers
Part of MSC2716: https://github.com/matrix-org/matrix-doc/pull/2716
Follow-up to https://github.com/matrix-org/synapse/pull/9247
* Debug message not available on federation
* Add base starting insertion point when no chunk ID is provided
* Fix messages from multiple senders in historical chunk
Follow-up to https://github.com/matrix-org/synapse/pull/9247
Part of MSC2716: https://github.com/matrix-org/matrix-doc/pull/2716
---
Previously, Synapse would throw a 403,
`Cannot force another user to join.`,
because we were trying to use `?user_id` from a single virtual user
which did not match with messages from other users in the chunk.
* Remove debug lines
* Messing with selecting insertion event extremeties
* Move db schema change to new version
* Add more better comments
* Make a fake requester with just what we need
See https://github.com/matrix-org/synapse/pull/10276#discussion_r660999080
* Store insertion events in table
* Make base insertion event float off on its own
See https://github.com/matrix-org/synapse/pull/10250#issuecomment-875711889
Conflicts:
synapse/rest/client/v1/room.py
* Validate that the app service can actually control the given user
See https://github.com/matrix-org/synapse/pull/10276#issuecomment-876316455
Conflicts:
synapse/rest/client/v1/room.py
* Add some better comments on what we're trying to check for
* Continue debugging
* Share validation logic
* Add inserted historical messages to /backfill response
* Remove debug sql queries
* Some marker event implemntation trials
* Clean up PR
* Rename insertion_event_id to just event_id
* Add some better sql comments
* More accurate description
* Add changelog
* Make it clear what MSC the change is part of
* Add more detail on which insertion event came through
* Address review and improve sql queries
* Only use event_id as unique constraint
* Fix test case where insertion event is already in the normal DAG
* Remove debug changes
* Switch to chunk events so we can auth via power_levels
Previously, we were using `content.chunk_id` to connect one
chunk to another. But these events can be from any `sender`
and we can't tell who should be able to send historical events.
We know we only want the application service to do it but these
events have the sender of a real historical message, not the
application service user ID as the sender. Other federated homeservers
also have no indicator which senders are an application service on
the originating homeserver.
So we want to auth all of the MSC2716 events via power_levels
and have them be sent by the application service with proper
PL levels in the room.
* Switch to chunk events for federation
* Add unstable room version to support new historical PL
* Fix federated events being rejected for no state_groups
Add fix from https://github.com/matrix-org/synapse/pull/10439
until it merges.
* Only connect base insertion event to prev_event_ids
Per discussion with @erikjohnston,
https://matrix.to/#/!UytJQHLQYfvYWsGrGY:jki.re/$12bTUiObDFdHLAYtT7E-BvYRp3k_xv8w0dUQHibasJk?via=jki.re&via=matrix.org
* Make it possible to get the room_version with txn
* Allow but ignore historical events in unsupported room version
See https://github.com/matrix-org/synapse/pull/10245#discussion_r675592489
We can't reject historical events on unsupported room versions because homeservers without knowledge of MSC2716 or the new room version don't reject historical events either.
Since we can't rely on the auth check here to stop historical events on unsupported room versions, I've added some additional checks in the processing/persisting code (`synapse/storage/databases/main/events.py` -> `_handle_insertion_event` and `_handle_chunk_event`). I've had to do some refactoring so there is method to fetch the room version by `txn`.
* Move to unique index syntax
See https://github.com/matrix-org/synapse/pull/10245#discussion_r675638509
* High-level document how the insertion->chunk lookup works
* Remove create_event fallback for room_versions
See https://github.com/matrix-org/synapse/pull/10245/files#r677641879
* Use updated method name
IE11 doesn't support Content-Security-Policy but it has support for
a non-standard X-Content-Security-Policy header, which only supports the
sandbox directive. This prevents script execution, so it at least offers
some protection against media repo-based attacks.
Signed-off-by: Denis Kasak <dkasak@termina.org.uk>
* Fix no-access-token bug in deactivation tests
* Support MSC2033: Device ID on whoami
* Test for appservices too
MSC: https://github.com/matrix-org/matrix-doc/pull/2033
The MSC has passed FCP, which means stable endpoints can be used.
Improves type hints for:
* parse_{boolean,integer}
* parse_{boolean,integer}_from_args
* parse_json_{value,object}_from_request
And fixes any incorrect calls that resulted from unknown types.
Previously, we were using `content.chunk_id` to connect one
chunk to another. But these events can be from any `sender`
and we can't tell who should be able to send historical events.
We know we only want the application service to do it but these
events have the sender of a real historical message, not the
application service user ID as the sender. Other federated homeservers
also have no indicator which senders are an application service on
the originating homeserver.
So we want to auth all of the MSC2716 events via power_levels
and have them be sent by the application service with proper
PL levels in the room.
This adds an API for third-party plugin modules to implement account validity, so they can provide this feature instead of Synapse. The module implementing the current behaviour for this feature can be found at https://github.com/matrix-org/synapse-email-account-validity.
To allow for a smooth transition between the current feature and the new module, hooks have been added to the existing account validity endpoints to allow their behaviours to be overridden by a module.
* Add base starting insertion point when no chunk ID is provided
This is so we can have the marker event point to this initial
insertion event and be able to traverse the events in the first chunk.
This implements refresh tokens, as defined by MSC2918
This MSC has been implemented client side in Hydrogen Web: vector-im/hydrogen-web#235
The basics of the MSC works: requesting refresh tokens on login, having the access tokens expire, and using the refresh token to get a new one.
Signed-off-by: Quentin Gliech <quentingliech@gmail.com>
Required some fixes due to merge conflicts with #6739, but nothing too hairy. The first commit is the same as the original (after merge conflict resolution) then two more for compatibility with the latest sync code.
Dangerous actions means deactivating an account, modifying an account
password, or adding a 3PID.
Other actions (deleting devices, uploading keys) can re-use the same UI
auth session if ui_auth.session_timeout is configured.
* Room version 7 for knocking.
* Stable prefixes and endpoints (both client and federation) for knocking.
* Removes the experimental configuration flag.
* Fix /upload 500'ing when presented a very large image
Catch DecompressionBombError and re-raise as ThumbnailErrors
* Set PIL's MAX_IMAGE_PIXELS to match homeserver.yaml
to get it to bomb out quicker, to load less into memory
in the case of super large images
* Add changelog entry for 10029
Per changes in MSC2946, the C-S and S-S APIs for spaces summary
should use GET requests.
Until this is stable, the POST endpoints still exist.
This does not switch federation requests to use the GET version yet
since it is newly added and already deployed servers might not support
it. When switching to the stable endpoint we should switch to GET
requests.
This leaves out all optional keys from /sync. This should be fine for all clients tested against conduit already, but it may break some clients, as such we should check, that at least most of them don't break horribly and maybe back out some of the individual changes. (We can probably always leave out groups for example, while the others may cause more issues.)
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Support the delete of a room through DELETE request and mark
previous request as deprecated through documentation.
Signed-off-by: Thibault Ferrante <thibault.ferrante@pm.me>
I went through and removed a bunch of cruft that was lying around for compatibility with old Python versions. This PR also will now prevent Synapse from starting unless you're running Python 3.6+.
This attempts to be a direct port of https://github.com/matrix-org/synapse-dinsic/pull/74 to mainline. There was some fiddling required to deal with the changes that have been made to mainline since (mainly dealing with the split of `RegistrationWorkerStore` from `RegistrationStore`, and the changes made to `self.make_request` in test code).
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
This change ensures that the appservice registration behaviour follows the spec. We decided to do this for Dendrite, so it made sense to also make a PR for synapse to correct the behaviour.
Related: #8334
Deprecated in: #9429 - Synapse 1.28.0 (2021-02-25)
`GET /_synapse/admin/v1/users/<user_id>` has no
- unit tests
- documentation
API in v2 is available (#5925 - 12/2019, v1.7.0).
API is misleading. It expects `user_id` and returns a list of all users.
Signed-off-by: Dirk Klimpel dirk@klimpel.org
This should fix a class of bug where we forget to check if e.g. the appservice shouldn't be ratelimited.
We also check the `ratelimit_override` table to check if the user has ratelimiting disabled. That table is really only meant to override the event sender ratelimiting, so we don't use any values from it (as they might not make sense for different rate limits), but we do infer that if ratelimiting is disabled for the user we should disabled all ratelimits.
Fixes#9663
Running `dmypy run` will do a `mypy` check while spinning up a daemon
that makes rerunning `dmypy run` a lot faster.
`dmypy` doesn't support `follow_imports = silent` and has
`local_partial_types` enabled, so this PR enables those options and
fixes the issues that were newly raised. Note that `local_partial_types`
will be enabled by default in upcoming mypy releases.
Instead of if the user does not have a password hash. This allows a SSO
user to add a password to their account, but only if the local password
database is configured.
This great big stack of commits is a a whole load of hoop-jumping to make it easier to store additional values in login tokens, and then to actually store the SSO Identity Provider in the login token. (Making use of that data will follow in a subsequent PR.)
### Changes proposed in this PR
- Add support for the `no_proxy` and `NO_PROXY` environment variables
- Internally rely on urllib's [`proxy_bypass_environment`](bdb941be42/Lib/urllib/request.py (L2519))
- Extract env variables using urllib's `getproxies`/[`getproxies_environment`](bdb941be42/Lib/urllib/request.py (L2488)) which supports lowercase + uppercase, preferring lowercase, except for `HTTP_PROXY` in a CGI environment
This does contain behaviour changes for consumers so making sure these are called out:
- `no_proxy`/`NO_PROXY` is now respected
- lowercase `https_proxy` is now allowed and taken over `HTTPS_PROXY`
Related to #9306 which also uses `ProxyAgent`
Signed-off-by: Timothy Leung tim95@hotmail.co.uk
- Update black version to the latest
- Run black auto formatting over the codebase
- Run autoformatting according to [`docs/code_style.md
`](80d6dc9783/docs/code_style.md)
- Update `code_style.md` docs around installing black to use the correct version
==============================
Features
--------
- Further improvements to the user experience of registration via single sign-on. ([\#9297](https://github.com/matrix-org/synapse/issues/9297))
Bugfixes
--------
- Fix ratelimiting introduced in v1.27.0rc1 for invites to respect the `ratelimit` flag on application services. ([\#9302](https://github.com/matrix-org/synapse/issues/9302))
- Do not automatically calculate `public_baseurl` since it can be wrong in some situations. Reverts behaviour introduced in v1.26.0. ([\#9313](https://github.com/matrix-org/synapse/issues/9313))
Improved Documentation
----------------------
- Clarify the sample configuration for changes made to the template loading code. ([\#9310](https://github.com/matrix-org/synapse/issues/9310))
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEF3tZXk38tRDFVnUIM/xY9qcRMEgFAmAlX4AACgkQM/xY9qcR
MEjxhg/+JzOGDmgxy4Vm9oU84htkkJsflU755ykxhwbIjVy2j+07pMgtWMmebXIS
/tWjinwRB9OgKIK+j5RWdYzz/GRTkLCbafTLhhNOWsnaCO7nnAfZFozLOMd9g2qN
309cS8efZkxGCISGSRm1QQKjQDx6HHx7nZVAwpqb778Q9TMrBYRAQeCk9yws7FfL
GsP5YrBI42n84YhvflWA8J8QRYkeJJaggVWzE0XvwdI6raY1BmxMKcDvyl9iKpGb
/QXsdketD3eJxdOlU92O5ZxRXmL00bdyAFdw2+J3Y+wjoGBnC5njKSFG3j8Z2UcP
xIdB6w/zyGoPLKd4s7tkDI3axE7qrwFetA4NytannWGEHZ9q5tgOd5PA1kTeKYvn
ao2os4pKMjWQOHiWLskqZVXgmoW5Kb2zgyZU/vhFAz8ImuidFULOjpEytAWqtt1B
iuL/fRlM3z0BpwQNd3NBsblYTpZri8gdTp7ULJYtaKpT2MeG0sg3swJAptUjw9L4
awbQuBFZ8o/E/0xwiGieSxbR6b6Nz5WiCyLaeMz6b3Y4YdomttOAZ6pL6E9y8ygU
2wKYleSmg+tbaBKKZR5CSCwXOduSYPhWw7oqsfEfvT0NCQLuItfGNFZqxRzsf73H
lCV0wwxNZBv8kRyMs6KivMvSI6SKinAjXS8AjzHE402ozdwOCv0=
=NSyp
-----END PGP SIGNATURE-----
Merge tag 'v1.27.0rc2' into develop
Synapse 1.27.0rc2 (2021-02-11)
==============================
Features
--------
- Further improvements to the user experience of registration via single sign-on. ([\#9297](https://github.com/matrix-org/synapse/issues/9297))
Bugfixes
--------
- Fix ratelimiting introduced in v1.27.0rc1 for invites to respect the `ratelimit` flag on application services. ([\#9302](https://github.com/matrix-org/synapse/issues/9302))
- Do not automatically calculate `public_baseurl` since it can be wrong in some situations. Reverts behaviour introduced in v1.26.0. ([\#9313](https://github.com/matrix-org/synapse/issues/9313))
Improved Documentation
----------------------
- Clarify the sample configuration for changes made to the template loading code. ([\#9310](https://github.com/matrix-org/synapse/issues/9310))
This could arguably replace the existing admin API for `/members`, however that is out of scope of this change.
This sort of endpoint is ideal for moderation use cases as well as other applications, such as needing to retrieve various bits of information about a room to perform a task (like syncing power levels between two places). This endpoint exposes nothing more than an admin would be able to access with a `select *` query on their database.
There's some prelimiary work here to pull out the construction of a jinja environment to a separate function.
I wanted to load the template at display time rather than load time, so that it's easy to update on the fly. Honestly, I think we should do this with all our templates: the risk of ending up with malformed templates is far outweighed by the improved turnaround time for an admin trying to update them.
Fixes#8966.
* Factor out build_synapse_client_resource_tree
Start a function which will mount resources common to all workers.
* Move sso init into build_synapse_client_resource_tree
... so that we don't have to do it for each worker
* Fix SSO-login-via-a-worker
Expose the SSO login endpoints on workers, like the documentation says.
* Update workers config for new endpoints
Add documentation for endpoints recently added (#8942, #9017, #9262)
* remove submit_token from workers endpoints list
this *doesn't* work on workers (yet).
* changelog
* Add a comment about the odd path for SAML2Resource
There are going to be a couple of paths to get to the final step of SSO reg, and I want the URL in the browser to consistent. So, let's move the final step onto a separate path, which we redirect to.
We've decided to add a 'brand' field to help clients decide how to style the
buttons.
Also, fix up the allowed characters for idp_id, while I'm in the area.
Treat unknown encodings (according to lxml) as UTF-8
when generating a preview for HTML documents. This
isn't fully accurate, but will hopefully give a reasonable
title and summary.
This expands the current shadow-banning feature to be usable via
the admin API and adds documentation for it.
A shadow-banned users receives successful responses to their
client-server API requests, but the events are not propagated into rooms.
Shadow-banning a user should be used as a tool of last resort and may lead
to confusing or broken behaviour for the client.
If no thumbnail of the requested type exists, return a 404 instead
of erroring. This doesn't quite match the spec (which does not define
what happens if no thumbnail can be found), but is consistent with
what Synapse already does.
* Factor out a common TestHtmlParser
Looks like I'm doing this in a few different places.
* Improve OIDC login test
Complete the OIDC login flow, rather than giving up halfway through.
* Ensure that OIDC login works with multiple OIDC providers
* Fix bugs in handling clientRedirectUrl
- don't drop duplicate query-params, or params with no value
- allow utf-8 in query-params
Protecting media stops it from being quarantined when
e.g. all media in a room is quarantined. This is useful
for sticker packs and other media that is uploaded by
server administrators, but used by many people.
If we have integrations with multiple identity providers, when the user does a UI Auth, we need to redirect them to the right one.
There are a few steps to this. First of all we actually need to store the userid of the user we are trying to validate in the UIA session, since the /auth/sso/fallback/web request is unauthenticated.
Then, once we get the /auth/sso/fallback/web request, we can fish the user id out of the session, and use it to look up the external id mappings, and hence pick an SSO provider for them.
GET /_synapse/admin/v1/rooms/<identifier>/forward_extremities now gets forward extremities for a room, returning count and the list of extremities.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
* Implement CasHandler.handle_redirect_request
... to make it match OidcHandler and SamlHandler
* Clean up interface for OidcHandler.handle_redirect_request
Make it accept `client_redirect_url=None`.
* Clean up interface for `SamlHandler.handle_redirect_request`
... bring it into line with CAS and OIDC by making it take a Request parameter,
move the magic for `client_redirect_url` for UIA into the handler, and fix the
return type to be a `str` rather than a `bytes`.
* Define a common protocol for SSO auth provider impls
* Give SsoIdentityProvider an ID and register them
* Combine the SSO Redirect servlets
Now that the SsoHandler knows about the identity providers, we can combine the
various *RedirectServlets into a single implementation which delegates to the
right IdP.
* changelog
This adds an admin API that allows a server admin to get power in a room if a local user has power in a room. Will also invite the user if they're not in the room and its a private room. Can specify another user (rather than the admin user) to be granted power.
Co-authored-by: Matthew Hodgson <matthew@matrix.org>
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes#8876.
* Call set_avatar_url with target_user, not user_id
Fixes https://github.com/matrix-org/synapse/issues/8871
* Create 8872.bugfix
* Update synapse/rest/admin/users.py
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Testing
* Update changelog.d/8872.bugfix
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
The spec requires synapse to support `identifier` dicts for `m.login.password`
user-interactive auth, which it did not (instead, it required an undocumented
`user` parameter.)
To fix this properly, we need to pull the code that interprets `identifier`
into `AuthHandler.validate_login` so that it can be called from the UIA code.
Fixes#5665.
The main use case is to see how many requests are being made, and how
many are second/third/etc attempts. If there are large number of retries
then that likely indicates a delivery problem.
Split admin API for reported events in detail und list view.
API was introduced with #8217 in synapse v.1.21.0.
It makes the list (`GET /_synapse/admin/v1/event_reports`) less complex and provides a better overview.
The details can be queried with: `GET /_synapse/admin/v1/event_reports/<report_id>`.
It is similar to room and users API.
It is a kind of regression in `GET /_synapse/admin/v1/event_reports`. `event_json` was removed. But the api was introduced one version before and it is an admin API (not under spec).
Signed-off-by: Dirk Klimpel dirk@klimpel.org
There's no need for it to be in the dict as well as the events table. Instead,
we store it in a separate attribute in the EventInternalMetadata object, and
populate that on load.
This means that we can rely on it being correctly populated for any event which
has been persited to the database.
#7124 changed the behaviour of remote thumbnails so that the thumbnailing method was included in the filename of the thumbnail. To support existing files, it included a fallback so that we would check the old filename if the new filename didn't exist.
Unfortunately, it didn't apply this logic to storage providers, so any thumbnails stored on such a storage provider was broken.
This converts a few more of our inline HTML templates to Jinja. This is somewhat part of #7280 and should make it a bit easier to customize these in the future.
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
Broken in https://github.com/matrix-org/synapse/pull/8275 and has yet to be put in a release. Fixes https://github.com/matrix-org/synapse/issues/8418.
`next_link` is an optional parameter. However, we were checking whether the `next_link` param was valid, even if it wasn't provided. In that case, `next_link` was `None`, which would clearly not be a valid URL.
This would prevent password reset and other operations if `next_link` was not provided, and the `next_link_domain_whitelist` config option was set.
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEF3tZXk38tRDFVnUIM/xY9qcRMEgFAl9kzk8ACgkQM/xY9qcR
MEim6A//aERkhyLGRlGpLd37lCyFQCeffTMH1rTvu04iIBQBaUZ6g7CYWOpK43zT
U8kt379+5OShjdAXs/X4XP+ucdHVbrwsRSP3hBS/fFLiDT0fJgP8uiSf5QqO6NnT
OqDyXYjcXvj/c6tMKglVtsdh8u4hFwNZjGPMGG68IzJu14uEhnD100cL9jSB9bLB
ongWpsQzzdGBpJPSFRjv9dCUSeRbzyUdl1t0uqzrNqyN9s/JnzFTn7ZYo6y3lnSS
dHGVMMo/12M2PkbBHnbJVvDY5Q/R7ZxyXlpz0gvSNOQIw8FqYFnuB0Niy5dQhXSR
Sy5h4qbczLxqbql1x+lmzeQm4ZMORsW/Tl4C3z6yK6OYaOCJHIf9en4DplTSTqp1
t+85JxWR2wH10d99YHBpaYKmkVovpwgchrO4YWrtXljUFAhhavzf+YiAdOHYT52s
RDsDLsvjMbxEHsz4cHfycmshYhjzjb340wkoDXuQpj0zrO99d+Zd83xdK8pS0UQn
OaljLRAd/5iBjTSyZPSrB1U5141OzlM3QZVJzaYAnP12yhR9eaX2twSCk+lPYOWd
nhLJjNnj1B1XSGArthuE5NLyEiCPz6KyN2RhO0EOx5YjZN9TwH7LS9upyNFe1nN1
GIhO5gz+jWLuBZE3xzRNjJyCx/I/LolpCwGMvKDu6638rpsbrPs=
=tT5/
-----END PGP SIGNATURE-----
Merge tag 'v1.20.0rc5' into develop
Synapse 1.20.0rc5 (2020-09-18)
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
Add ability for ASes to /login using the `uk.half-shot.msc2778.login.application_service` login `type`.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
slots use less memory (and attribute access is faster) while slightly
limiting the flexibility of the class attributes. This focuses on objects
which are instantiated "often" and for short periods of time.
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
If a file cannot be thumbnailed for some reason (e.g. the file is empty), then
catch the exception and convert it to a reasonable error message for the client.
This fixes an issue where different methods (crop/scale) overwrite each other.
This first tries the new path. If that fails and we are looking for a
remote thumbnail, it tries the old path. If that still isn't found, it
continues as normal.
This should probably be removed in the future, after some of the newer
thumbnails were generated with the new path on most deployments. Then
the overhead should be minimal if the other thumbnails need to be
regenerated.
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
* Add shared_rooms api
* Add changelog
* Add .
* Wrap response in {"rooms": }
* linting
* Add unstable_features key
* Remove options from isort that aren't part of 5.x
`-y` and `-rc` are now default behaviour and no longer exist.
`dont-skip` is no longer required
https://timothycrosley.github.io/isort/CHANGELOG/#500-penny-july-4-2020
* Update imports to make isort happy
* Add changelog
* Update tox.ini file with correct invocation
* fix linting again for isort
* Vendor prefix unstable API
* Fix to match spec
* import Codes
* import Codes
* Use FORBIDDEN
* Update changelog.d/7785.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Implement get_shared_rooms_for_users
* a comma
* trailing whitespace
* Handle the easy feedback
* Switch to using runInteraction
* Add tests
* Feedback
* Seperate unstable endpoint from v2
* Add upgrade node
* a line
* Fix style by adding a blank line at EOF.
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Update UPGRADE.rst
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Fix UPGRADE/CHANGELOG unstable paths
unstable unstable unstable
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
This is split out from https://github.com/matrix-org/synapse/pull/7438, which had gotten rather large.
`LoginRestServlet` has a couple helper methods, `login_submission_legacy_convert` and `login_id_thirdparty_from_phone`. They're primarily used for converting legacy user login submissions to "identifier" dicts ([see spec](https://matrix.org/docs/spec/client_server/r0.6.1#post-matrix-client-r0-login)). Identifying information such as usernames or 3PID information used to be top-level in the login body. They're now supposed to be put inside an [identifier](https://matrix.org/docs/spec/client_server/r0.6.1#identifier-types) parameter instead.
#7438's purpose is to allow using the new identifier parameter during User-Interactive Authentication, which is currently handled in AuthHandler. That's why I've moved these helper methods there. I also moved the refactoring of these method from #7438 as they're relevant.
Small cleanup PR.
* Removed the unused `is_guest` argument
* Added a safeguard to a (currently) impossible code path, fixing static checking at the same time.
* Don't raise session_id errors on submit_token if request_token_inhibit_3pid_errors is set
* Changelog
* Also wait some time before responding to /requestToken
* Incorporate review
* Update synapse/storage/databases/main/registration.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Incorporate review
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
It's just a thin wrapper around two ID gens to make `get_current_token`
and `get_next` return tuples. This can easily be replaced by calling the
appropriate methods on the underlying ID gens directly.
The CI appears to use the latest version of isort, which is a problem when isort gets a major version bump. Rather than try to pin the version, I've done the necessary to make isort5 happy with synapse.
This requires a new config option to specify which media repo should be
responsible for running background jobs to e.g. clear out expired URL
preview caches.
The spec [states](https://matrix.org/docs/spec/client_server/r0.6.1#phone-number) that `m.id.phone` requires the field `country` and `phone`.
In Synapse, we've been enforcing `country` and `number`.
I am not currently sure whether this affects any client implementations.
This issue was introduced in #1994.
While working on https://github.com/matrix-org/synapse/issues/5665 I found myself digging into the `Ratelimiter` class and seeing that it was both:
* Rather undocumented, and
* causing a *lot* of config checks
This PR attempts to refactor and comment the `Ratelimiter` class, as well as encourage config file accesses to only be done at instantiation.
Best to be reviewed commit-by-commit.
* Expose `return_html_error`, and allow it to take a Jinja2 template instead of a raw string
* Clean up exception handling in SAML2ResponseResource
* use the existing code in `return_html_error` instead of re-implementing it
(giving it a jinja2 template rather than inventing a new form of template)
* do the exception-catching in the REST layer rather than in the handler
layer, to make sure we catch all exceptions.
The idea here is that if an instance persists an event via the replication HTTP API it can return before we receive that event over replication, which can lead to races where code assumes that persisting an event immediately updates various caches (e.g. current state of the room).
Most of Synapse doesn't hit such races, so we don't do the waiting automagically, instead we do so where necessary to avoid unnecessary delays. We may decide to change our minds here if it turns out there are a lot of subtle races going on.
People probably want to look at this commit by commit.
Bugfixes:
- Hash passwords as early as possible during registration. #7523
-----BEGIN PGP SIGNATURE-----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=lpDI
-----END PGP SIGNATURE-----
Merge tag 'v1.13.0rc3' into develop
Synapse 1.13.0rc3 (2020-05-18)
Bugfixes:
- Hash passwords as early as possible during registration. #7523
==============================
Bugfixes
--------
- Fix a long-standing bug which could cause messages not to be sent over federation, when state events with state keys matching user IDs (such as custom user statuses) were received. ([\#7376](https://github.com/matrix-org/synapse/issues/7376))
- Restore compatibility with non-compliant clients during the user interactive authentication process, fixing a problem introduced in v1.13.0rc1. ([\#7483](https://github.com/matrix-org/synapse/issues/7483))
Internal Changes
----------------
- Fix linting errors in new version of Flake8. ([\#7470](https://github.com/matrix-org/synapse/issues/7470))
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEv27Axt/F4vrTL/8QOSor00I9eP8FAl69IQ8ACgkQOSor00I9
eP87lAf8DK+v6cs2U0BoD5opzQ7ZazJT6JYTmnMBaTzHU6Wx20V2ttkF7Vpwm3WU
Zsz0048tdYtHFyYBQ1kF5RNIBBJwV8SA/QUcPkR7FVpwZMLR2q4aJn0EE7kC9OMf
tYsmdbHeBdyfLXpXzazxWlgHquLyEIt52ykAcCphjx/Jl2fAExFEhtfsxpECoJ2f
8Dqhjg3WFjd6QWU6AFkElbwHUYCdIWdJOcsC8N1p8OvBmDz5QXv/RlYipHE00Cpx
QQQOgEjdRc6dlz2mbetMklnfII3p2kO9bzNdmEpOzT0Zt7nFaGdntW4I1QA0yJfa
gows9bYMzhqYk7YSiyTYOZ4qyavVtw==
=N/zZ
-----END PGP SIGNATURE-----
Merge tag 'v1.13.0rc2' into develop
Synapse 1.13.0rc2 (2020-05-14)
==============================
Bugfixes
--------
- Fix a long-standing bug which could cause messages not to be sent over federation, when state events with state keys matching user IDs (such as custom user statuses) were received. ([\#7376](https://github.com/matrix-org/synapse/issues/7376))
- Restore compatibility with non-compliant clients during the user interactive authentication process, fixing a problem introduced in v1.13.0rc1. ([\#7483](https://github.com/matrix-org/synapse/issues/7483))
Internal Changes
----------------
- Fix linting errors in new version of Flake8. ([\#7470](https://github.com/matrix-org/synapse/issues/7470))
* release-v1.13.0:
Don't UPGRADE database rows
RST indenting
Put rollback instructions in upgrade notes
Fix changelog typo
Oh yeah, RST
Absolute URL it is then
Fix upgrade notes link
Provide summary of upgrade issues in changelog. Fix )
Move next version notes from changelog to upgrade notes
Changelog fixes
1.13.0rc1
Documentation on setting up redis (#7446)
Rework UI Auth session validation for registration (#7455)
Fix errors from malformed log line (#7454)
Drop support for redis.dbid (#7450)
By persisting the user interactive authentication sessions to the database, this fixes
situations where a user hits different works throughout their auth session and also
allows sessions to persist through restarts of Synapse.
If an error happened while processing a SAML AuthN response, or a client
ends up doing a `GET` request to `/authn_response`, then render a
customisable error page rather than a confusing error.
... and set it everywhere it's called.
while we're here, rename it for consistency with `check_user_in_room` (and to
help check that I haven't missed any instances)
This was ill-advised. We can't modify verify_keys here, because the response
object has already been signed by the requested key.
Furthermore, it's somewhat unnecessary because existing versions of Synapse
(which get upset that the notary key isn't present in verify_keys) will fall
back to a direct fetch via `/key/v2/server`.
Also: more tests for fetching keys via perspectives: it would be nice if we actually tested when our fetcher can't talk to our notary impl.
* Kill off redundant SynapseRequestFactory
We already get the Site via the Channel, so there's no need for a dedicated
RequestFactory: we can just use the right constructor.
* Workaround for error when fetching notary's own key
As a notary server, when we return our own keys, include all of our signing
keys in verify_keys.
This is a workaround for #6596.
* Remove redundant python2 support code
`str.decode()` doesn't exist on python3, so presumably this code was doing
nothing
* Filter out pushers with corrupt data
When we get a row with unparsable json, drop the row, rather than returning a
row with null `data`, which will then cause an explosion later on.
* Improve logging when we can't start a pusher
Log the ID to help us understand the problem
* Make email pusher setup more robust
We know we'll have a `data` member, since that comes from the database. What we
*don't* know is if that is a dict, and if that has a `brand` member, and if
that member is a string.
Eric Eastwood