Old device entries for the same user were being removed in individual
SQL commands, making the batch take way longer than necessary.
This combines the commands into a single one with a IN/ANY clause.
Example of log entry before the change, regularly observed with
"log_min_duration_statement = 10000" in PostgreSQL's config:
LOG: duration: 42538.282 ms statement:
DELETE FROM device_lists_stream
WHERE user_id = '@someone' AND device_id = 'someid1'
AND stream_id < 123456789
;
DELETE FROM device_lists_stream
WHERE user_id = '@someone' AND device_id = 'someid2'
AND stream_id < 123456789
;
[repeated for each device ID of that user, potentially a lot...]
With the patch applied on my instance for the past couple of days, I
no longer notice overly long statements of that particular kind.
Signed-off-by: pacien <pacien.trangirard@pacien.net>
* Fix use of config override directory in `devenv up`
`--config-directory` is for the generate config script; `-c` is for usage
* Add homeserver config override directory to gitignore
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
If you leave a room and forget it, then rejoin it, the room would be
missing from the next initial sync.
fixes#13262
Signed-off-by: Nicolas Werner <n.werner@famedly.com>
The port DB script would try and run database background tasks, which
could fail if the data they acted on was in the process of being ported.
These exceptions were non fatal.
Fixes#15789
We now only block the client to backfill when we see a large gap in the events (more than 2 events missing in a row according to `depth`), more than 3 single-event holes, or not enough messages to fill the response. Otherwise, we return the messages directly to the client and backfill in the background for eventual consistency sake.
Fix https://github.com/matrix-org/synapse/issues/15696
* Check required power levels earlier in createRoom handler.
- If a server was configured to reject the creation of rooms with E2EE
enabled (by specifying an unattainably high power level for
"m.room.encryption" in default_power_level_content_override), the 403
error was not being triggered until after the room was created and
before the "m.room.power_levels" was sent. This allowed a user to
access the partially-configured room and complete the setup of E2EE
and power levels manually.
- This change causes the power level overrides to be checked earlier and
the request to be rejected before the user gains access to the room.
- A new `_validate_room_config` method is added to contain checks that
should be run before a room is created.
- The new test case confirms that a user request is rejected by the new
validation method.
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
* Add a changelog file.
* Formatting fix for black.
* Remove unneeded line from test.
---------
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
See https://github.com/matrix-org/synapse/pull/14095#discussion_r990335492
This is useful because when see that a relevant event is an `outlier` or `soft-failed`, then that's a good unexpected indicator explaining why it's not showing up. `filter_events_for_client` is used in `/sync`, `/messages`, `/context` which are all common end-to-end assertion touch points (also notifications, relations).
Implements stable support for MSC3882; this involves updating Synapse's support to
match the MSC / the spec says.
Continue to support the unstable version to allow clients to transition.
Fix https://github.com/matrix-org/synapse/issues/15662
This manifests as purple lines that show up on all time series panels
that you can hover and see what version was deployed.
Also added a new "Deployed Synapse versions over time" panel
where the color block changes with each version. And mixed this
color block into the "Up" time series panel.
To get the Grafana dashboard JSON to copy here: use the **Share** icon at the top -> **Export** -> check the **Export for sharing externally** option -> **View JSON** or **Save to file**
The stubs have some issues so this has some generous cast
and ignores in it, but it is better than not having stubs.
Note that confusing that Element is a function which creates
_Element instances (and similarly for Comment).
* Fully qualified docker image names for the main Dockerfile and Complement related.
* Fully qualified docker image names for Dockerfiles associated with building Debian release artifacts.
This one is harder and is separate from the other commit in case it wasn't correct or was unwanted. I decided to
do the expansion on the docker images in the Dockerfile itself, instead of the various source places that build
which distribution that is selected, as it would have been more invasive with the scripts breaking up the string
for tagging and such. This one is untested.
* Changelog
* Update docker/Dockerfile-workers
* Update docker/complement/Dockerfile
---------
Co-authored-by: reivilibre <olivier@librepush.net>
Fix#15667
- Reiterate the importance of getting Rust installed and set up before attempting to install the Python dependencies.
- Mention the importance of confirming that `poetry install` completed successfully and include a typical error that the user might see if it did not.
- Expand on "Now edit homeserver.yaml" to give examples of things likely to need changing and to link to the relevant sections of the Synapse server documentation.
Updates the database schema to require a thread_id (by adding a
constraint that the column is non-null) for event_push_actions,
event_push_actions_staging, and event_push_actions_summary.
For PostgreSQL we add the constraint as NOT VALID, then
VALIDATE the constraint a background job to avoid locking
the table during an upgrade.
Each table is updated as a separate schema delta to avoid
deadlocks between them.
For SQLite we simply rebuild the table & copy the data.
The cached decorators always return a Deferred, which was not
properly propagated. It was close enough when wrapping coroutines,
but failed if a bare function was wrapped.
```
2023-05-21 09:30:09,288 - synapse.logging.opentracing - 940 - ERROR - POST-1 - @trace may not have wrapped StateStorageController.get_state_for_groups correctly! The function is not async but returned a coroutine
```
Tracing instrumentation for these functions originally introduced in https://github.com/matrix-org/synapse/pull/15610
This moves the deactivated user check to the method which
all login types call.
Additionally updates the application service tests to be more
realistic by removing invalid tests and fixing server names.
All the information needed is already in the `instance_map`, so
use that instead of passing the hostname / IP & port manually
for each replication request.
This consolidates logic for future improvements of using e.g.
UNIX sockets for workers.
Fix https://github.com/matrix-org/synapse/issues/15618
### Before
```
2023-05-17 22:51:36-0500 [-] 2023-05-17 22:51:36,889 - synapse.server - 338 - INFO - sentinel - Finished setting up.
```
### After
```
2023-05-19 18:16:20-0500 [-] synapse.server - 338 - INFO - sentinel - Finished setting up.
```
### Dev notes
The `Twisted.Logger` controls the `2023-05-19 18:16:20-0500 [-]` prefix, see : [`twisted/twisted` -> `src/twisted/logger/_format.py#L362-L374`](34b161e66b/src/twisted/logger/_format.py (L362-L374))
And we delegate our logs to the Twisted Logger for the tests which puts it in `_trial_temp/test.log`
The event_fields property in filters should use the proper
escape rules, namely backslashes can be escaped with
an additional backslash.
This adds tests (adapted from matrix-js-sdk) and implements
the logic to properly split the event_fields strings.
...to try to control memory usage. `HomeServerConfig`s hold on to
many Jinja2 objects, which come out to over 0.5 MiB per config.
Over the course of a full test run, the cache grows to ~360 entries.
Limit it to 8 entries.
Part of #15622.
Signed-off-by: Sean Quah <seanq@matrix.org>
Instrument `state` and `state_group` storage related things (tracing) so it's a little more clear where these database transactions are coming from as there is a lot of wires crossing in these functions.
Part of `/messages` performance investigation: https://github.com/matrix-org/synapse/issues/13356
R30v2 has been out since 2021-07-19 (https://github.com/matrix-org/synapse/pull/10332)
and we started collecting stats on 2021-08-16. Since it's been over a year now
(almost 2 years), this is enough grace period for us to now rip it out.
Synapse will no longer send (or respond to) the unstable flags
for faster joins. These were only available behind a configuration
flag and handled in parallel with the stable flags.
This change fixes two memory leaks during `trial` test runs.
Garbage collection is disabled during each test case and a gen-0 GC is
run at the end of each test. However, when the gen-0 GC is run, the
`TestCase` object usually still holds references to the `HomeServer`
used during the test. As a result, the `HomeServer` gets promoted to
gen-1 and then never garbage collected.
Fix this by periodically running full GCs.
Additionally, fix `HomeServer`s leaking after tests that touch inbound
federation due to `FederationRateLimiter`s adding themselves to a global
set, by turning the set into a `WeakSet`.
Resolves#15622.
Signed-off-by: Sean Quah <seanq@matrix.org>
If the previous read marker is pointing to an event that no longer exists
(e.g. due to retention) then assume that the newly given read marker
is newer.
To track changes in MSC2666:
- The change from `/mutual_rooms/{user_id}` to `/mutual_rooms?user_id={user_id}`.
- The addition of `next_batch_token` (and logic).
- Unstable flag now being `uk.half-shot.msc2666.query_mutual_rooms`.
- The error code when your own user is requested.
The second argument of `ConfigError` is a path, passed as an optional
`Iterable[str]` and not a `str`. If a string is passed directly,
Synapse unhelpfully emits "Error in configuration at
a.p.p._.s.e.r.v.i.c.e._.c.o.n.f.i.g._.f.i.l.e.s'" when the config
option has the wrong data type.
Signed-off-by: Sean Quah <seanq@matrix.org>
There are two situations which were previously not properly checked:
1. If the requested URL was replaced with an oEmbed URL, then the
oEmbed URL was not checked against url_preview_url_blacklist.
2. Follow-up URLs (either via autodiscovery of oEmbed or to pre-cache
images) were not checked against url_preview_url_blacklist.
We use the oldest Python version because later Python versions can include some overloads which don't work in the older versions which we still support.
We're using Python 3.8 instead of 3.7 which is our actual minimum support version because it's EOL is in a matter of weeks so can avoid the extra effort. And in any case, minimum Python 3.8 support is better than winging it on Python 3.11.
* Usage that is compatible with Python 3.8 and 3.11
> Since Python 3.10, instead of passing value and tb, an exception object can
be passed as the first argument. If value and tb are provided, the first
argument is ignored in order to provide backwards compatibility.
>
> -- https://docs.python.org/3/library/traceback.html
* Add changelog
Fix the following `mypy` errors when running `mypy` with Python 3.7:
```
synapse/storage/controllers/stats.py:58: error: "Counter" is not subscriptable, use "typing.Counter" instead [misc]
tests/test_state.py:267: error: "dict" is not subscriptable, use "typing.Dict" instead [misc]
```
Part of https://github.com/matrix-org/synapse/issues/15603
In Python 3.9, `typing` is deprecated and the types are subscriptable (generics) by default, https://peps.python.org/pep-0585/#implementation
MSC3389 proposes protecting the relation type & parent event ID
from redaction. This keeps the relation information intact after
redaction which helps with some UX flaws (e.g. deleting an
event causes it to no longer be in a thread, which is confusing).
Adds logging for key server requests which include a key ID.
This is technically in violation of the 1.6 spec, but is the only
way to remain backwards compatibly with earlier versions of
Synapse (and possibly other homeservers) which *did* include
the key ID.
I found the error in the **Before** really vague and obtuse and didn't realize port `5432` corresponded to the Postgres port until searching the codebase. It says to check the logs but that wasn't my first instinct. It's just more obvious if we just print the full thing which gives context of the error type and the traceback to the relevant area of code.
#### Before
```
$ poetry run python -m synapse.app.homeserver -c homeserver.yaml
**********************************************************************************
Error during initialisation:
connection to server at "localhost" (::1), port 5432 failed: Connection refused
Is the server running on that host and accepting TCP/IP connections?
connection to server at "localhost" (127.0.0.1), port 5432 failed: Connection refused
Is the server running on that host and accepting TCP/IP connections?
There may be more information in the logs.
**********************************************************************************
```
#### After
```sh
$ poetry run python -m synapse.app.homeserver -c homeserver.yaml
**********************************************************************************
Error during initialisation:
Traceback (most recent call last):
File "/home/eric/Documents/github/element/synapse/synapse/app/homeserver.py", line 352, in setup
hs.setup()
File "/home/eric/Documents/github/element/synapse/synapse/server.py", line 337, in setup
self.datastores = Databases(self.DATASTORE_CLASS, self)
File "/home/eric/Documents/github/element/synapse/synapse/storage/databases/__init__.py", line 65, in __init__
with make_conn(database_config, engine, "startup") as db_conn:
File "/home/eric/Documents/github/element/synapse/synapse/storage/database.py", line 161, in make_conn
native_db_conn = engine.module.connect(**db_params)
File "/home/eric/.cache/pypoetry/virtualenvs/matrix-synapse-xCtC9ulO-py3.10/lib/python3.10/site-packages/psycopg2/__init__.py", line 122, in connect
conn = _connect(dsn, connection_factory=connection_factory, **kwasync)
psycopg2.OperationalError: connection to server at "localhost" (::1), port 5432 failed: Connection refused
Is the server running on that host and accepting TCP/IP connections?
connection to server at "localhost" (127.0.0.1), port 5432 failed: Connection refused
Is the server running on that host and accepting TCP/IP connections?
There may be more information in the logs.
**********************************************************************************
```
* Add SSL options to redis config
* fix lint issues
* Add documentation and changelog file
* add missing . at the end of the changelog
* Move client context factory to new file
* Rename ssl to tls and fix typo
* fix lint issues
* Added when redis attributes were added
* Add master to the instance_map as part of Complement, have ReplicationEndpoint look at instance_map for master.
* Fix typo in drive by.
* Remove unnecessary worker_replication_* bits from unit tests and add master to instance_map(hopefully in the right place)
* Several updates:
1. Switch from master to main for naming the main process in the instance_map. Add useful constants for easier adjustment of names in the future.
2. Add backwards compatibility for worker_replication_* to allow time to transition to new style. Make sure to prioritize declaring main directly on the instance_map.
3. Clean up old comments/commented out code.
4. Adjust unit tests to match with new code.
5. Adjust Complement setup infrastructure to only add main to the instance_map if workers are used and remove now unused options from the worker.yaml template.
* Initial Docs upload
* Changelog
* Missed some commented out code that can go now
* Remove TODO comment that no longer holds true.
* Fix links in docs
* More docs
* Remove debug logging
* Apply suggestions from code review
Co-authored-by: reivilibre <olivier@librepush.net>
* Apply suggestions from code review
Co-authored-by: reivilibre <olivier@librepush.net>
* Update version to latest, include completeish before/after examples in upgrade notes.
* Fix up and docs too
---------
Co-authored-by: reivilibre <olivier@librepush.net>
Separate out a HTTP client for replication in preparation for
also supporting using UNIX sockets. The major difference from
the base class is that this does not use treq to handle HTTP
requests.
This stops media (and thumbnails) from being accessed from the
listed domains. It does not delete any already locally cached media,
but will prevent accessing it.
Note that admin APIs are unaffected by this change.
m.push_rules, like m.fully_read, is a special account data type that cannot
be set using the normal /account_data endpoint. Return an error instead
of allowing data that will not be used to be stored.
Michael Weimann