Users admin API can now also modify user
type in addition to allowing it to be
set on user creation.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
Resolve and share `state_groups` for all historical events in batch. This also helps for showing the appropriate avatar/displayname in Element and will work whenever `/messages` has one of the historical messages as the first message in the batch.
This does have the flaw where if you just insert a single historical event somewhere, it probably won't resolve the state correctly from `/messages` or `/context` since it will grab a non historical event above or below with resolved state which never included the historical state back then. For the same reasions, this also does not work in Element between the transition from actual messages to historical messages. In the Gitter case, this isn't really a problem since all of the historical messages are in one big lump at the beginning of the room.
For a future iteration, might be good to look at `/messages` and `/context` to additionally add the `state` for any historical messages in that batch.
---
How are the `state_groups` shared? To illustrate the `state_group` sharing, see this example:
**Before** (new `state_group` for every event 😬, very inefficient):
```
# Tests from https://github.com/matrix-org/complement/pull/206
$ COMPLEMENT_ALWAYS_PRINT_SERVER_LOGS=1 COMPLEMENT_DIR=../complement ./scripts-dev/complement.sh TestBackfillingHistory/parallel/should_resolve_member_state_events_for_historical_events
create_new_client_event m.room.member event=$_JXfwUDIWS6xKGG4SmZXjSFrizhARM7QblhATVWWUcA state_group=None
create_new_client_event org.matrix.msc2716.insertion event=$1ZBfmBKEjg94d-vGYymKrVYeghwBOuGJ3wubU1-I9y0 state_group=9
create_new_client_event org.matrix.msc2716.insertion event=$Mq2JvRetTyclPuozRI682SAjYp3GqRuPc8_cH5-ezPY state_group=10
create_new_client_event m.room.message event=$MfmY4rBQkxrIp8jVwVMTJ4PKnxSigpG9E2cn7S0AtTo state_group=11
create_new_client_event m.room.message event=$uYOv6V8wiF7xHwOMt-60d1AoOIbqLgrDLz6ZIQDdWUI state_group=12
create_new_client_event m.room.message event=$PAbkJRMxb0bX4A6av463faiAhxkE3FEObM1xB4D0UG4 state_group=13
create_new_client_event org.matrix.msc2716.batch event=$Oy_S7AWN7rJQe_MYwGPEy6RtbYklrI-tAhmfiLrCaKI state_group=14
```
**After** (all events in batch sharing `state_group=10`) (the base insertion event has `state_group=8` which matches the `prev_event` we're inserting next to):
```
# Tests from https://github.com/matrix-org/complement/pull/206
$ COMPLEMENT_ALWAYS_PRINT_SERVER_LOGS=1 COMPLEMENT_DIR=../complement ./scripts-dev/complement.sh TestBackfillingHistory/parallel/should_resolve_member_state_events_for_historical_events
create_new_client_event m.room.member event=$PWomJ8PwENYEYuVNoG30gqtybuQQSZ55eldBUSs0i0U state_group=None
create_new_client_event org.matrix.msc2716.insertion event=$e_mCU7Eah9ABF6nQU7lu4E1RxIWccNF05AKaTT5m3lw state_group=9
create_new_client_event org.matrix.msc2716.insertion event=$ui7A3_GdXIcJq0C8GpyrF8X7B3DTjMd_WGCjogax7xU state_group=10
create_new_client_event m.room.message event=$EnTIM5rEGVezQJiYl62uFBl6kJ7B-sMxWqe2D_4FX1I state_group=10
create_new_client_event m.room.message event=$LGx5jGONnBPuNhAuZqHeEoXChd9ryVkuTZatGisOPjk state_group=10
create_new_client_event m.room.message event=$wW0zwoN50lbLu1KoKbybVMxLbKUj7GV_olozIc5i3M0 state_group=10
create_new_client_event org.matrix.msc2716.batch event=$5ZB6dtzqFBCEuMRgpkU201Qhx3WtXZGTz_YgldL6JrQ state_group=10
```
Updating mypy past version 0.9 means that third-party stubs are no-longer distributed with typeshed. See http://mypy-lang.blogspot.com/2021/06/mypy-0900-released.html for details.
We therefore pull in stub packages in setup.py
Additionally, some modules that we were previously ignoring import failures for now have stubs. So let's use them.
The rest of this change consists of fixups to make the newer mypy + stubs pass CI.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
This removes the magic allowing accessing configurable
variables directly from the config object. It is now required
that a specific configuration class is used (e.g. `config.foo`
must be replaced with `config.server.foo`).
This avoids the overhead of searching through the various
configuration classes by directly referencing the class that
the attributes are in.
It also improves type hints since mypy can now resolve the
types of the configuration variables.
* Improved titles (fall back to the author name if there's not title) and include the site name.
* Handle photo/video payloads.
* Include the original URL in the Open Graph response.
* Fix the expiration time (by properly converting from seconds to milliseconds).
The major change is moving the decision of whether to use oEmbed
further up the call-stack. This reverts the _download_url method to
being a "dumb" functionwhich takes a single URL and downloads it
(as it was before #7920).
This also makes more minor refactorings:
* Renames internal variables for clarity.
* Factors out shared code between the HTML and rich oEmbed
previews.
* Fixes tests to preview an oEmbed image.
* add tests for checking if room search works with non-ascii char
* change encoding on parse_string to UTF-8
* lints
* properly encode search term
* lints
* add changelog file
* update changelog number
* set changelog entry filetype to .bugfix
* Revert "set changelog entry filetype to .bugfix"
This reverts commit be8e5a3142.
* update changelog message and file type
* change parse_string default encoding back to ascii and update room search admin api calll to parse string
* refactor tests
* Update tests/rest/admin/test_room.py
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
This adds the format to the request arguments / URL to
ensure that JSON data is returned (which is all that
Synapse supports).
This also adds additional error checking / filtering to the
configuration file to ignore XML-only providers.
* Validate device_keys for C-S /keys/query requests
Closes#10354
A small, not particularly critical fix. I'm interested in seeing if we
can find a more systematic approach though. #8445 is the place for any discussion.
Several configuration sections are using separate settings for custom template directories, which can be confusing. This PR adds a new top-level configuration for a custom template directory which is then used for every module. The only exception is the consent templates, since the consent template directory require a specific hierarchy, so it's probably better that it stays separate from everything else.
* Make historical messages available to federated servers
Part of MSC2716: https://github.com/matrix-org/matrix-doc/pull/2716
Follow-up to https://github.com/matrix-org/synapse/pull/9247
* Debug message not available on federation
* Add base starting insertion point when no chunk ID is provided
* Fix messages from multiple senders in historical chunk
Follow-up to https://github.com/matrix-org/synapse/pull/9247
Part of MSC2716: https://github.com/matrix-org/matrix-doc/pull/2716
---
Previously, Synapse would throw a 403,
`Cannot force another user to join.`,
because we were trying to use `?user_id` from a single virtual user
which did not match with messages from other users in the chunk.
* Remove debug lines
* Messing with selecting insertion event extremeties
* Move db schema change to new version
* Add more better comments
* Make a fake requester with just what we need
See https://github.com/matrix-org/synapse/pull/10276#discussion_r660999080
* Store insertion events in table
* Make base insertion event float off on its own
See https://github.com/matrix-org/synapse/pull/10250#issuecomment-875711889
Conflicts:
synapse/rest/client/v1/room.py
* Validate that the app service can actually control the given user
See https://github.com/matrix-org/synapse/pull/10276#issuecomment-876316455
Conflicts:
synapse/rest/client/v1/room.py
* Add some better comments on what we're trying to check for
* Continue debugging
* Share validation logic
* Add inserted historical messages to /backfill response
* Remove debug sql queries
* Some marker event implemntation trials
* Clean up PR
* Rename insertion_event_id to just event_id
* Add some better sql comments
* More accurate description
* Add changelog
* Make it clear what MSC the change is part of
* Add more detail on which insertion event came through
* Address review and improve sql queries
* Only use event_id as unique constraint
* Fix test case where insertion event is already in the normal DAG
* Remove debug changes
* Switch to chunk events so we can auth via power_levels
Previously, we were using `content.chunk_id` to connect one
chunk to another. But these events can be from any `sender`
and we can't tell who should be able to send historical events.
We know we only want the application service to do it but these
events have the sender of a real historical message, not the
application service user ID as the sender. Other federated homeservers
also have no indicator which senders are an application service on
the originating homeserver.
So we want to auth all of the MSC2716 events via power_levels
and have them be sent by the application service with proper
PL levels in the room.
* Switch to chunk events for federation
* Add unstable room version to support new historical PL
* Fix federated events being rejected for no state_groups
Add fix from https://github.com/matrix-org/synapse/pull/10439
until it merges.
* Only connect base insertion event to prev_event_ids
Per discussion with @erikjohnston,
https://matrix.to/#/!UytJQHLQYfvYWsGrGY:jki.re/$12bTUiObDFdHLAYtT7E-BvYRp3k_xv8w0dUQHibasJk?via=jki.re&via=matrix.org
* Make it possible to get the room_version with txn
* Allow but ignore historical events in unsupported room version
See https://github.com/matrix-org/synapse/pull/10245#discussion_r675592489
We can't reject historical events on unsupported room versions because homeservers without knowledge of MSC2716 or the new room version don't reject historical events either.
Since we can't rely on the auth check here to stop historical events on unsupported room versions, I've added some additional checks in the processing/persisting code (`synapse/storage/databases/main/events.py` -> `_handle_insertion_event` and `_handle_chunk_event`). I've had to do some refactoring so there is method to fetch the room version by `txn`.
* Move to unique index syntax
See https://github.com/matrix-org/synapse/pull/10245#discussion_r675638509
* High-level document how the insertion->chunk lookup works
* Remove create_event fallback for room_versions
See https://github.com/matrix-org/synapse/pull/10245/files#r677641879
* Use updated method name
IE11 doesn't support Content-Security-Policy but it has support for
a non-standard X-Content-Security-Policy header, which only supports the
sandbox directive. This prevents script execution, so it at least offers
some protection against media repo-based attacks.
Signed-off-by: Denis Kasak <dkasak@termina.org.uk>
* Fix no-access-token bug in deactivation tests
* Support MSC2033: Device ID on whoami
* Test for appservices too
MSC: https://github.com/matrix-org/matrix-doc/pull/2033
The MSC has passed FCP, which means stable endpoints can be used.
Improves type hints for:
* parse_{boolean,integer}
* parse_{boolean,integer}_from_args
* parse_json_{value,object}_from_request
And fixes any incorrect calls that resulted from unknown types.
Previously, we were using `content.chunk_id` to connect one
chunk to another. But these events can be from any `sender`
and we can't tell who should be able to send historical events.
We know we only want the application service to do it but these
events have the sender of a real historical message, not the
application service user ID as the sender. Other federated homeservers
also have no indicator which senders are an application service on
the originating homeserver.
So we want to auth all of the MSC2716 events via power_levels
and have them be sent by the application service with proper
PL levels in the room.
This adds an API for third-party plugin modules to implement account validity, so they can provide this feature instead of Synapse. The module implementing the current behaviour for this feature can be found at https://github.com/matrix-org/synapse-email-account-validity.
To allow for a smooth transition between the current feature and the new module, hooks have been added to the existing account validity endpoints to allow their behaviours to be overridden by a module.
* Add base starting insertion point when no chunk ID is provided
This is so we can have the marker event point to this initial
insertion event and be able to traverse the events in the first chunk.
This implements refresh tokens, as defined by MSC2918
This MSC has been implemented client side in Hydrogen Web: vector-im/hydrogen-web#235
The basics of the MSC works: requesting refresh tokens on login, having the access tokens expire, and using the refresh token to get a new one.
Signed-off-by: Quentin Gliech <quentingliech@gmail.com>
Required some fixes due to merge conflicts with #6739, but nothing too hairy. The first commit is the same as the original (after merge conflict resolution) then two more for compatibility with the latest sync code.
Dangerous actions means deactivating an account, modifying an account
password, or adding a 3PID.
Other actions (deleting devices, uploading keys) can re-use the same UI
auth session if ui_auth.session_timeout is configured.
* Room version 7 for knocking.
* Stable prefixes and endpoints (both client and federation) for knocking.
* Removes the experimental configuration flag.
* Fix /upload 500'ing when presented a very large image
Catch DecompressionBombError and re-raise as ThumbnailErrors
* Set PIL's MAX_IMAGE_PIXELS to match homeserver.yaml
to get it to bomb out quicker, to load less into memory
in the case of super large images
* Add changelog entry for 10029
Per changes in MSC2946, the C-S and S-S APIs for spaces summary
should use GET requests.
Until this is stable, the POST endpoints still exist.
This does not switch federation requests to use the GET version yet
since it is newly added and already deployed servers might not support
it. When switching to the stable endpoint we should switch to GET
requests.
This leaves out all optional keys from /sync. This should be fine for all clients tested against conduit already, but it may break some clients, as such we should check, that at least most of them don't break horribly and maybe back out some of the individual changes. (We can probably always leave out groups for example, while the others may cause more issues.)
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Support the delete of a room through DELETE request and mark
previous request as deprecated through documentation.
Signed-off-by: Thibault Ferrante <thibault.ferrante@pm.me>
I went through and removed a bunch of cruft that was lying around for compatibility with old Python versions. This PR also will now prevent Synapse from starting unless you're running Python 3.6+.
This attempts to be a direct port of https://github.com/matrix-org/synapse-dinsic/pull/74 to mainline. There was some fiddling required to deal with the changes that have been made to mainline since (mainly dealing with the split of `RegistrationWorkerStore` from `RegistrationStore`, and the changes made to `self.make_request` in test code).
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
This change ensures that the appservice registration behaviour follows the spec. We decided to do this for Dendrite, so it made sense to also make a PR for synapse to correct the behaviour.
Related: #8334
Deprecated in: #9429 - Synapse 1.28.0 (2021-02-25)
`GET /_synapse/admin/v1/users/<user_id>` has no
- unit tests
- documentation
API in v2 is available (#5925 - 12/2019, v1.7.0).
API is misleading. It expects `user_id` and returns a list of all users.
Signed-off-by: Dirk Klimpel dirk@klimpel.org
This should fix a class of bug where we forget to check if e.g. the appservice shouldn't be ratelimited.
We also check the `ratelimit_override` table to check if the user has ratelimiting disabled. That table is really only meant to override the event sender ratelimiting, so we don't use any values from it (as they might not make sense for different rate limits), but we do infer that if ratelimiting is disabled for the user we should disabled all ratelimits.
Fixes#9663
Running `dmypy run` will do a `mypy` check while spinning up a daemon
that makes rerunning `dmypy run` a lot faster.
`dmypy` doesn't support `follow_imports = silent` and has
`local_partial_types` enabled, so this PR enables those options and
fixes the issues that were newly raised. Note that `local_partial_types`
will be enabled by default in upcoming mypy releases.
Jason Robinson