* Add support for followers synchronization on the receiving end
Check the `collectionSynchronization` attribute on `Create` and `Announce`
activities and synchronize followers from provided collection if possible.
* Add tests for followers synchronization on the receiving end
* Add support for follower synchronization on the sender's end
* Add tests for the sending end
* Switch from AS attributes to HTTP header
Replace the custom `collectionSynchronization` ActivityStreams attribute by
an HTTP header (`X-AS-Collection-Synchronization`) with the same syntax as
the `Signature` header and the following fields:
- `collectionId` to specify which collection to synchronize
- `digest` for the SHA256 hex-digest of the list of followers known on the
receiving instance (where “receiving instance” is determined by accounts
sharing the same host name for their ActivityPub actor `id`)
- `url` of a collection that should be fetched by the instance actor
Internally, move away from the webfinger-based `domain` attribute and use
account `uri` prefix to group accounts.
* Add environment variable to disable followers synchronization
Since the whole mechanism relies on some new preconditions that, in some
extremely rare cases, might not be met, add an environment variable
(DISABLE_FOLLOWERS_SYNCHRONIZATION) to disable the mechanism altogether and
avoid followers being incorrectly removed.
The current conditions are:
1. all managed accounts' actor `id` and inbox URL have the same URI scheme and
netloc.
2. all accounts whose actor `id` or inbox URL share the same URI scheme and
netloc as a managed account must be managed by the same Mastodon instance
as well.
As far as Mastodon is concerned, breaking those preconditions require extensive
configuration changes in the reverse proxy and might also cause other issues.
Therefore, this environment variable provides a way out for people with highly
unusual configurations, and can be safely ignored for the overwhelming majority
of Mastodon administrators.
* Only set follower synchronization header on non-public statuses
This is to avoid unnecessary computations and allow Follow-related
activities to be handled by the usual codepath instead of going through
the synchronization mechanism (otherwise, any Follow/Undo/Accept activity
would trigger the synchronization mechanism even if processing the activity
itself would be enough to re-introduce synchronization)
* Change how ActivityPub::SynchronizeFollowersService handles follow requests
If the remote lists a local follower which we only know has sent a follow
request, consider the follow request as accepted instead of sending an Undo.
* Integrate review feeback
- rename X-AS-Collection-Synchronization to Collection-Synchronization
- various minor refactoring and code style changes
* Only select required fields when computing followers_hash
* Use actor URI rather than webfinger domain in synchronization endpoint
* Change hash computation to be a XOR of individual hashes
Makes it much easier to be memory-efficient, and avoid sorting discrepancy issues.
* Marginally improve followers_hash computation speed
* Further improve hash computation performances by using pluck_each
* Add bell button
Fix#4890
* Remove duplicate type from post-deployment migration
* Fix legacy class type mappings
* Improve query performance with better index
* Fix validation
* Remove redundant index from notifications
Same URI passed between follow request and follow, since they are
the same thing in ActivityPub. Local URIs are generated during
creation using UUIDs and are passed to serializers.
* Update annotate to version 2.7.3
* Update aws-sdk-s3 to version 1.9.2
* Update browser to version 2.5.3
* Update capistrano to version 3.10.2
* Update domain_name to version 0.5.20180417
* Update http to version 3.2.0
* Update lograge to version 0.10.0
* Update oj to version 3.5.1
* Update parallel_tests to version 2.21.3
* Update puma to version 3.11.4
* Update rubocop to version 0.55.0
* Update scss_lint to version 0.57.0
* Update simplecov to version 0.16.1
* Update tty-command to version 0.8.0
* Update tty-prompt to version 0.16.0
* Update pkg-config to version 1.3.0
* Update fog-local to version 0.5.0
* Update fog-openstack to version 0.1.25
* Update devise-two-factor to version 3.0.3
* bundle update
* Allow hiding of reblogs from followed users
This adds a new entry to the account menu to allow users to hide
future reblogs from a user (and then if they've done that, to show
future reblogs instead).
This does not remove or add historical reblogs from/to the user's
timeline; it only affects new statuses.
The API for this operates by sending a "reblogs" key to the follow
endpoint. If this is sent when starting a new follow, it will be
respected from the beginning of the follow relationship (even if
the follow request must be approved by the followee). If this is
sent when a follow relationship already exists, it will simply
update the existing follow relationship. As with the notification
muting, this will now return an object ({reblogs: [true|false]}) or
false for each follow relationship when requesting relationship
information for an account. This should cause few issues due to an
object being truthy in many languages, but some modifications may
need to be made in pickier languages.
Database changes: adds a show_reblogs column (default true,
non-nullable) to the follows and follow_requests tables. Because
these are non-nullable, we use the existing MigrationHelpers to
perform this change without locking those tables, although the
tables are likely to be small anyway.
Tests included.
See also <https://github.com/glitch-soc/mastodon/pull/212>.
* Rubocop fixes
* Code review changes
* Test fixes
This patchset closes#648 and resolves#3271.
* Rubocop fix
* Revert reblogs defaulting in argument, fix tests
It turns out we needed this for the same reason we needed it in muting:
if nil gets passed in somehow (most usually by an API client not passing
any value), we need to detect and handle it.
We could specify a default in the parameter and then also catch nil, but
there's no great reason to duplicate the default value.
* Add structure for lists
* Add list timeline streaming API
* Add list APIs, bind list-account relation to follow relation
* Add API for adding/removing accounts from lists
* Add pagination to lists API
* Add pagination to list accounts API
* Adjust scopes for new APIs
- Creating and modifying lists merely requires "write" scope
- Fetching information about lists merely requires "read" scope
* Add test for wrong user context on list timeline
* Clean up tests
All the migrations have been updated to use BIGINTs for ID fields in the DB, but ActiveRecord needs to be told to treat those values as BIGINT as well. This PR does that.
* Make IdsToBigints (mostly!) non-blocking
This pulls in GitLab's MigrationHelpers, which include code to make
column changes in ways that Postgres can do without locking. In general,
this involves creating a new column, adding an index and any foreign
keys as appropriate, adding a trigger to keep it populated alongside
the old column, and then progressively copying data over to the new
column, before removing the old column and replacing it with the new
one.
A few changes to GitLab's MigrationHelpers were necessary:
* Some changes were made to remove dependencies on other GitLab code.
* We explicitly wait for index creation before forging ahead on column
replacements.
* We use different temporary column names, to avoid running into index
name length limits.
* We rename the generated indices back to what they "should" be after
replacing columns.
* We rename the generated foreign keys to use the new column names when
we had to create them. (This allows the migration to be rolled back
without incident.)
# Big Scary Warning
There are two things here that may trip up large instances:
1. The change for tables' "id" columns is not concurrent. In
particular, the stream_entries table may be big, and does not
concurrently migrate its id column. (On the other hand, x_id type
columns are all concurrent.)
2. This migration will take a long time to run, *but it should not
lock tables during that time* (with the exception of the "id"
columns as described above). That means this should probably be run
in `screen` or some other session that can be run for a long time.
Notably, the migration will take *longer* than it would without
these changes, but the website will still be responsive during that
time.
These changes were tested on a relatively large statuses table (256k
entries), and the service remained responsive during the migration.
Migrations both forward and backward were tested.
* Rubocop fixes
* MigrationHelpers: Support ID columns in some cases
This doesn't work in cases where the ID column is referred to as a
foreign key by another table.
* MigrationHelpers: support foreign keys for ID cols
Note that this does not yet support foreign keys on non-primary-key
columns, but Mastodon also doesn't yet have any that we've needed to
migrate.
This means we can perform fully "concurrent" migrations to change ID
column types, and the IdsToBigints migration can happen with effectively
no downtime. (A few operations require a transaction, such as renaming
columns or deleting them, but these transactions should not block for
noticeable amounts of time.)
The algorithm for generating foreign key names has changed with this,
and therefore all of those changed in schema.rb.
* Provide status, allow for interruptions
The MigrationHelpers now allow restarting the rename of a column if it
was interrupted, by removing the old "new column" and re-starting the
process.
Along with this, they now provide status updates on the changes which
are happening, as well as indications about when the changes can be
safely interrupted (when there are at least 10 seconds estimated to be
left before copying data is complete).
The IdsToBigints migration now also sorts the columns it migrates by
size, starting with the largest tables. This should provide
administrators a worst-case scenario estimate for the length of
migrations: each successive change will get faster, giving admins a
chance to abort early on if they need to run the migration later. The
idea is that this does not force them to try to time interruptions
between smaller migrations.
* Fix column sorting in IdsToBigints
Not a significant change, but it impacts the order of columns in the
database and db/schema.rb.
* Actually pause before IdsToBigints
* add annotate to Gemfile
* rails g annotate:install
* configure annotate_models
* add schema info to models
* fix rubocop to add frozen_string_literal
ThibG