mirror of https://github.com/tootsuite/mastodon
6 Commits (57bb62d5cfe1b269ccfc82c0d2fd73fbf1252a3d)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Quint Guvernator
|
da13fa5021 |
Fix low-hanging rubocop gripes (#8458)
* rubocop: quit being so picky * rubocop: miscellany * rubocop: prefer present to blank |
|
|
Eugen Rochko
|
0717d9b3e6 |
Set snowflake IDs for backdated statuses (#5260)
- Rename Mastodon::TimestampIds into Mastodon::Snowflake for clarity - Skip for statuses coming from inbox, aka delivered in real-time - Skip for statuses that claim to be from the future |
|
|
Eugen Rochko
|
eb5ac23434 |
Clean up code style of Mastodon::TimestampId module (#5232)
* Clean up code style of Mastodon::TimestampId module * Update brakeman config |
|
|
aschmitz
|
468523f4ad |
Non-Serial ("Snowflake") IDs (#4801)
* Use non-serial IDs
This change makes a number of nontrivial tweaks to the data model in
Mastodon:
* All IDs are now 8 byte integers (rather than mixed 4- and 8-byte)
* IDs are now assigned as:
* Top 6 bytes: millisecond-resolution time from epoch
* Bottom 2 bytes: serial (within the millisecond) sequence number
* See /lib/tasks/db.rake's `define_timestamp_id` for details, but
note that the purpose of these changes is to make it difficult to
determine the number of objects in a table from the ID of any
object.
* The Redis sorted set used for the feed will have values used to look
up toots, rather than scores. This is almost always the same as the
existing behavior, except in the case of boosted toots. This change
was made because Redis stores scores as double-precision floats,
which cannot store the new ID format exactly. Note that this doesn't
cause problems with sorting/pagination, because ZREVRANGEBYSCORE
sorts lexicographically when scores are tied. (This will still cause
sorting issues when the ID gains a new significant digit, but that's
extraordinarily uncommon.)
Note a couple of tradeoffs have been made in this commit:
* lib/tasks/db.rake is used to enforce many/most column constraints,
because this commit seems likely to take a while to bring upstream.
Enforcing a post-migrate hook is an easier way to maintain the code
in the interim.
* Boosted toots will appear in the timeline as many times as they have
been boosted. This is a tradeoff due to the way the feed is saved in
Redis at the moment, but will be handled by a future commit.
This would effectively close Mastodon's #1059, as it is a
snowflake-like system of generating IDs. However, given how involved
the changes were simply within Mastodon, it may have unexpected
interactions with some clients, if they store IDs as doubles
(or as 4-byte integers). This was a problem that Twitter ran into with
their "snowflake" transition, particularly in JavaScript clients that
treated IDs as JS integers, rather than strings. It therefore would be
useful to test these changes at least in the web interface and popular
clients before pushing them to all users.
* Fix JavaScript interface with long IDs
Somewhat predictably, the JS interface handled IDs as numbers, which in
JS are IEEE double-precision floats. This loses some precision when
working with numbers as large as those generated by the new ID scheme,
so we instead handle them here as strings. This is relatively simple,
and doesn't appear to have caused any problems, but should definitely
be tested more thoroughly than the built-in tests. Several days of use
appear to support this working properly.
BREAKING CHANGE:
The major(!) change here is that IDs are now returned as strings by the
REST endpoints, rather than as integers. In practice, relatively few
changes were required to make the existing JS UI work with this change,
but it will likely hit API clients pretty hard: it's an entirely
different type to consume. (The one API client I tested, Tusky, handles
this with no problems, however.)
Twitter ran into this issue when introducing Snowflake IDs, and decided
to instead introduce an `id_str` field in JSON responses. I have opted
to *not* do that, and instead force all IDs to 64-bit integers
represented by strings in one go. (I believe Twitter exacerbated their
problem by rolling out the changes three times: once for statuses, once
for DMs, and once for user IDs, as well as by leaving an integer ID
value in JSON. As they said, "If you’re using the `id` field with JSON
in a Javascript-related language, there is a very high likelihood that
the integers will be silently munged by Javascript interpreters. In most
cases, this will result in behavior such as being unable to load or
delete a specific direct message, because the ID you're sending to the
API is different than the actual identifier associated with the
message." [1]) However, given that this is a significant change for API
users, alternatives or a transition time may be appropriate.
1: https://blog.twitter.com/developer/en_us/a/2011/direct-messages-going-snowflake-on-sep-30-2011.html
* Restructure feed pushes/unpushes
This was necessary because the previous behavior used Redis zset scores
to identify statuses, but those are IEEE double-precision floats, so we
can't actually use them to identify all 64-bit IDs. However, it leaves
the code in a much better state for refactoring reblog handling /
coalescing.
Feed-management code has been consolidated in FeedManager, including:
* BatchedRemoveStatusService no longer directly manipulates feed zsets
* RemoveStatusService no longer directly manipulates feed zsets
* PrecomputeFeedService has moved its logic to FeedManager#populate_feed
(PrecomputeFeedService largely made lots of calls to FeedManager, but
didn't follow the normal adding-to-feed process.)
This has the effect of unifying all of the feed push/unpush logic in
FeedManager, making it much more tractable to update it in the future.
Due to some additional checks that must be made during, for example,
batch status removals, some Redis pipelining has been removed. It does
not appear that this should cause significantly increased load, but if
necessary, some optimizations are possible in batch cases. These were
omitted in the pursuit of simplicity, but a batch_push and batch_unpush
would be possible in the future.
Tests were added to verify that pushes happen under expected conditions,
and to verify reblog behavior (both on pushing and unpushing). In the
case of unpushing, this includes testing behavior that currently leads
to confusion such as Mastodon's #2817, but this codifies that the
behavior is currently expected.
* Rubocop fixes
I could swear I made these changes already, but I must have lost them
somewhere along the line.
* Address review comments
This addresses the first two comments from review of this feature:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336735
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336931
This adds an optional argument to FeedManager#key, the subtype of feed
key to generate. It also tests to ensure that FeedManager's settings are
such that reblogs won't be tracked forever.
* Hardcode IdToBigints migration columns
This addresses a comment during review:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139337452
This means we'll need to make sure that all _id columns going forward
are bigints, but that should happen automatically in most cases.
* Additional fixes for stringified IDs in JSON
These should be the last two. These were identified using eslint to try
to identify any plain casts to JavaScript numbers. (Some such casts are
legitimate, but these were not.)
Adding the following to .eslintrc.yml will identify casts to numbers:
~~~
no-restricted-syntax:
- warn
- selector: UnaryExpression[operator='+'] > :not(Literal)
message: Avoid the use of unary +
- selector: CallExpression[callee.name='Number']
message: Casting with Number() may coerce string IDs to numbers
~~~
The remaining three casts appear legitimate: two casts to array indices,
one in a server to turn an environment variable into a number.
* Only implement timestamp IDs for Status IDs
Per discussion in #4801, this is only being merged in for Status IDs at
this point. We do this in a migration, as there is no longer use for
a post-migration hook. We keep the initialization of the timestamp_id
function as a Rake task, as it is also needed after db:schema:load (as
db/schema.rb doesn't store Postgres functions).
* Change internal streaming payloads to stringified IDs as well
This is equivalent to
|
|
|
Daniel Hunsaker
|
9ead3d1cdb |
[nanobox] Adjustments for Nanobox development (#3295)
Because Nanobox doesn't run data components in the same container as the code, there are a few tweaks that need to be made in the configuration to get WebPack to work properly in development mode. The same differences lead to needing to use `DATABASE_URL` by default in the `.env` file for Rails to work correctly. Limitations of our `.env` loader for Node.js mean the `.env` file needs to be compiled everywhere in order to work, so we compile it in development, now, too. Also, all the `.env.production` tweaks have been consolidated into a single command. Finally, since Nanobox actually creates the database when it sets up the database server, using the existence of the database alone to determine whether to migrate or setup is insufficient. So we add a condition to `rake db:migrate:setup` to check whether any migrations have run - if the database doesn't exist yet, `db:setup` will be called; if it does, but no migrations have been run, `db:migrate` and `db:seed` are called instead (the same basic idea as what `db:setup` does, but it skips `db:create`, which will only cause problems with an existing DB); otherwise, only `db:migrate` is called. None of these changes should affect development, and all are designed not to interfere with existing behaviors in other environments. |
|
|
Daniel Hunsaker
|
256e3adc1d |
Add Support for Nanobox (#1709)
* Nanobox Support
- Added support for running Mastodon using Nanobox, both for local development, and for deployment to production
- Dev mode tested and is working properly
- Deployment is undergoing test as of this writing. If it works, this line will be amended to state success; if not, one or more subsequent commits will provide fixes.
* [nanobox] Resolve Deploy Issues
Everything seems to work except routing to the streaming API. Will investigate with the Nanobox staff and make fix commits if needed.
Changes made:
- Also need `NODE_ENV` in production
- Node runs on `:4000`
- Use `envsubst` to commit `.env.production` values, since `dotEnv` packages don't always support referencing other variables
- Can't precompile assets after `transform` hook, but do this locally so it only has to be done once.
- Rails won't create `production.log` on its own, so we do this ourselves.
- Some `start` commands run from `/data/` for some reason, so use absolute paths in command arguments
* [nanobox] Update Ruby version
* [nanobox] Fix db.rake Ruby code style issues
* [nanobox] Minor Fixes
Some minor adjustments to improve functionality:
- Fixed routing to `web.stream` instances
- Adjust `.env.nanobox` to properly generate a default `SMTP_FROM_ADDRESS` via `envsubst`
- Update Nginx configs to properly support the needed HTTP version and headers for proper functionality (the streaming API doesn't work without some of these settings in place)
* [nanobox] Move usage info to docs repo
* [nanobox] Updates for 1.2.x
- Need to leave out `pkg-config` since Nanobox deploys without Ruby's headers - create a gem group to exclude the gem during Nanobox installs, but allow it to remain part of the default set otherwise
- Update cron jobs to cover new/updated Rake tasks
- Update `.env.nanobox` to include latest defaults and additions
* [nanobox] Fix for nokogumbo, added in 1.3.x
Apparently, nokogumbo (pulled in by sanitize, added with `OEmbed Support for PreviewCard` (#2337) -
|