to_s method of HTTP::Response keeps blocking while it receives the whole
content, no matter how it is big. This means it may waste time to receive
unacceptably large files. It may also consume memory and disk in the
process. This solves the inefficency by checking response length while
receiving.
HTTP connections must be explicitly closed in many cases, and letting
perform method close connections makes its callers less redundant and
prevent them from forgetting to close connections.
* request: in the event of failure, try other IPs (#6761)
In the case where a name has multiple A/AAAA records, we should
try subsequent records instead of immediately failing when we have a
failure on the first IP address.
This significantly improves delivery success when there are network
connectivity problems affecting only IPv4 or IPv6.
* fix method call style
* request_spec: adjust test case to use Addrinfo
* request: Request/open: move private addr check to within begin/rescue
* request_spec: add case to test failover, fix exception check
* Double Addrinfo.foreach so that it correctly yields instances
Previously the default locale was set by Localized concern for controllers,
but it was not enforced for mailers.
config is enforced throughout the application and an appropriate place to
set the default locale.
A complemental change for precompute_feed_service_spec.rb also fixes its
random failure which is caused by the Snowlake randomization of the order
of an original status and its reblog.
* Redesign landing page (again)
* Move login form in small version to the right column
* Display closed registrations message
* Add site setting for the hero image
* Fix test
* Increase spacing, maximum width, change call to action section
* Fix#201: Account archive download
* Export actor and private key in the archive
* Optimize BackupService
- Add conversation to cached associations of status, because
somehow it was forgotten and is source of N+1 queries
- Explicitly call GC between batches of records being fetched
(Model class allocations are the worst offender)
- Stream media files into the tar in 1MB chunks
(Do not allocate media file (up to 8MB) as string into memory)
- Use #bytesize instead of #size to calculate file size for JSON
(Fix FileOverflow error)
- Segment media into subfolders by status ID because apparently
GIF-to-MP4 media are all named "media.mp4" for some reason
* Keep uniquely generated filename in Paperclip::GifTranscoder
* Ensure dumped files do not overwrite each other by maintaing directory partitions
* Give tar archives a good name
* Add scheduler to remove week-old backups
* Fix code style issue
The cache store is explicitly used by some specs, but they were not
isolated and therefore not reliable. This fixes the issue by clearing
the cache after each specs.
Some available languages lack translations for notification mails. Now it
tests for two languages which is certain to have required translations:
German and English.
German is the language the current project owner, Eugen Rochko speaks, and
providing English translations for new messages is de facto mandatory.
In cases where a URL has a trailing hyphen the FetchLinkCardService incorrectly removes the hyphen when it is parsed
The hyphen is not a reserved character in the URI spec https://tools.ietf.org/html/rfc3986#section-2.2
* Add full-text search for authorized statuses
- Search API will return statuses that match the query
- Only for logged in users
- Only if you are author of the status,
- Or you were mentioned in it
- Or you favourited or reblogged it
- Configuration over `ES_ENABLED`, `ES_HOST`, `ES_PORT`, `ES_PREFIX`
- Run `rails chewy:deploy` to create & populate index
Fix#5880Fix#4293Fix#1152
* Add commented out docker-compose configuration for ES container
* Optimize index import, filter search results
* Add basic normalization to the index
* Add better stemming and normalization to the index
* Skip webfinger request if search query includes both @ and a space
* Fix code style
* Visually separate search result sections
* Fix code style issues
* When must_be_following_dm is on, only notify if recipient dm'ed user
Currently, when must_be_following_dm is on, if a user sends a direct
message replying to any status from the recipient, the recipient gets a
notification. This should not be the case, as if the recipient posted
something publicly this can be used to spam their notifications.
* Refactor replied_to_status_is_direct_message?
Following suggestion in PR
* Fix regeneration marker not being removed after completion
* Return HTTP 206 from /api/v1/timelines/home if regeneration in progress
Prioritize RegenerationWorker by putting it into default queue
* Display loading indicator and poll home timeline while it regenerates
* Add graphic to regeneration message
* Make "not found" indicator consistent with home regeneration
* Fix actors accepting invalid URI schemes or different host between URI and URL
* Fix statuses accepting invalid URI scheme or different host to actor
* Adjust tests to new requirements
* Improve readability of mismatching_origin?/invalid_origin? methods
A change introduced in #6125 prevents
`Devise::Models::Confirmable#confirm` from being called for existing
users, which in turn leads to `email` not being set to
`unconfirmed_email`, breaking email updates. This also adds a test
that would've caught this issue.
* Don't normalize URLs in toots
URL normalization is ill-defined and may cause certain links to break.
* Change specs since we are not normalizing user-provided URLs
* Sanitize classlist properly
* Actually properly sanitize every class after the first
* Improve Formatter spec to check for multiple classes and non-space whitespace
* Add confirmation step for email changes
This adds a confirmation step for email changes of existing users.
Like the initial account confirmation, a confirmation link is sent
to the new address.
Additionally, a notification is sent to the existing address when
the change is initiated. This message includes instruction to reset
the password immediately or to contact the instance admin if the
change was not initiated by the account owner.
Fixes#3871
* Add review fixes
* Break out nested relationship API keys
This closes#5856 by restoring the existing behavior of the `muting`
and `following` keys (returning booleans rather than truthy or false).
It adds `showing_reblogs` and `muting_notifications` keys:
* `showing_reblogs` returns true if:
1. You've requested to follow the user, with reblogs shown, or
2. You are following the user, with reblogs shown.
* `muting_notifications` returns true if you have muted the user and
their notifications as well.
* Rubocop fix
* Fix pulling reblog/mute status from relationships
I could swear this had passed tests before, but apparently not.
Works now.
* More test fixes
Really, you'd expect this to be more straightforward.
* Add list of lists component to web UI
* Add list adding
* Add list removing
* List editor modal
* Add API account search limited by following=true relation
* Rework list editor modal
* Remove mandatory pagination of GET /api/v1/lists/:id/accounts
* Adjust search input placeholder
* Fix rspec (#5890)
* i18n: (zh-CN) Add missing translations for #5811 (#5891)
* i18n: (zh-CN) yarn manage:translations -- zh-CN
* i18n: (zh-CN) Add missing translations for #5811
* Fix some issues
- Display loading/missing state for list timelines
- Order lists alphabetically in overview
- Fix async list editor reset
- Redirect to /lists after deleting unpinned list
- Redirect to / after pinning a list
* Remove dead list columns when a list is deleted or fetch returns 404
* Add semi-support for Video/Image objects in ActivityPub
Video and Image objects will create corresponding status records
with manually crafted text contents (title + URL)
* Extract html-url-finding logic into JsonLdHelper
* Fallback to id when url missing, extract supported object types
* Avoid sending explicit Undo->Announce when original deleted
* Do not forward a reply back to the server that sent it
* Deduplicate inboxes of rebloggers' followers for delete forwarding
* Adjust test
* Fix wrong class, bad SQL, wrong variable, outdated comment
* Allow hiding of reblogs from followed users
This adds a new entry to the account menu to allow users to hide
future reblogs from a user (and then if they've done that, to show
future reblogs instead).
This does not remove or add historical reblogs from/to the user's
timeline; it only affects new statuses.
The API for this operates by sending a "reblogs" key to the follow
endpoint. If this is sent when starting a new follow, it will be
respected from the beginning of the follow relationship (even if
the follow request must be approved by the followee). If this is
sent when a follow relationship already exists, it will simply
update the existing follow relationship. As with the notification
muting, this will now return an object ({reblogs: [true|false]}) or
false for each follow relationship when requesting relationship
information for an account. This should cause few issues due to an
object being truthy in many languages, but some modifications may
need to be made in pickier languages.
Database changes: adds a show_reblogs column (default true,
non-nullable) to the follows and follow_requests tables. Because
these are non-nullable, we use the existing MigrationHelpers to
perform this change without locking those tables, although the
tables are likely to be small anyway.
Tests included.
See also <https://github.com/glitch-soc/mastodon/pull/212>.
* Rubocop fixes
* Code review changes
* Test fixes
This patchset closes#648 and resolves#3271.
* Rubocop fix
* Revert reblogs defaulting in argument, fix tests
It turns out we needed this for the same reason we needed it in muting:
if nil gets passed in somehow (most usually by an API client not passing
any value), we need to detect and handle it.
We could specify a default in the parameter and then also catch nil, but
there's no great reason to duplicate the default value.
* Add test for temporary account resolving failures in ProcessMentionsService
* Fix processing of mentions to already-known remote accounts on temporary failures
* Add consumable invites
* Add UI for generating invite codes
* Add tests
* Display max uses and expiration in invites table, delete invite
* Remove unused column and redundant validator
- Default follows not used, probably bad idea
- InviteCodeValidator is redundant because RegistrationsController
checks invite code validity
* Add admin setting to disable invites
* Add admin UI for invites, configurable role for invite creation
- Admin UI that lists everyone's invites, always available
- Admin setting min_invite_role to control who can invite people
- Non-admin invite UI only visible if users are allowed to
* Do not remove invites from database, expire them instantly
* Add structure for lists
* Add list timeline streaming API
* Add list APIs, bind list-account relation to follow relation
* Add API for adding/removing accounts from lists
* Add pagination to lists API
* Add pagination to list accounts API
* Adjust scopes for new APIs
- Creating and modifying lists merely requires "write" scope
- Fetching information about lists merely requires "read" scope
* Add test for wrong user context on list timeline
* Clean up tests
* Add a hide_notifications column to mutes
* Add muting_notifications? and a notifications argument to mute!
* block notifications in notify_service from hard muted accounts
* Add specs for how mute! interacts with muting_notifications?
* specs testing that hide_notifications in mutes actually hides notifications
* Add support for muting notifications in MuteService
* API support for muting notifications (and specs)
* Less gross passing of notifications flag
* Break out a separate mute modal with a hide-notifications checkbox.
* Convert profile header mute to use mute modal
* Satisfy eslint.
* specs for MuteService notifications params
* add trailing newlines to files for Pork :)
* Put the label for the hide notifications checkbox in a label element.
* Add a /api/v1/mutes/details route that just returns the array of mutes.
* Define a serializer for /api/v1/mutes/details
* Add more specs for the /api/v1/mutes/details endpoint
* Expose whether a mute hides notifications in the api/v1/relationships endpoint
* Show whether muted users' notifications are muted in account lists
* Allow modifying the hide_notifications of a mute with the /api/v1/accounts/:id/mute endpoint
* make the hide/unhide notifications buttons work
* satisfy eslint
* In probably dead code, replace a dispatch of muteAccount that was skipping the modal with launching the mute modal.
* fix a missing import
* add an explanatory comment to AccountInteractions
* Refactor handling of default params for muting to make code cleaner
* minor code style fixes oops
* Fixed a typo that was breaking the account mute API endpoint
* Apply white-space: nowrap to account relationships icons
* Fix code style issues
* Remove superfluous blank line
* Rename /api/v1/mutes/details -> /api/v2/mutes
* Don't serialize "account" in MuteSerializer
Doing so is somewhat unnecessary since it's always the current user's account.
* Fix wrong variable name in api/v2/mutes
* Use Toggle in place of checkbox in the mute modal.
* Make the Toggle in the mute modal look better
* Code style changes in specs and removed an extra space
* Code review suggestions from akihikodaki
Also fixed a syntax error in tests for AccountInteractions.
* Make AddHideNotificationsToMute Concurrent
It's not clear how much this will benefit instances in practice, as the
number of mutes tends to be pretty small, but this should prevent any
blocking migrations nonetheless.
* Fix up migration things
* Remove /api/v2/mutes
* Add option to block direct messages from people you don't follow
Fix#5326
* If the DM responds to a toot by recipient, allow it through
* i18n: Update Polish translation (for #5669) (#5673)
* Add a test for FollowRequest#authorize!
* Remove tests
There is no need to test
ActiveModel::Validations::ClassMethods#validates.
* Make an alias of destroy! as reject!
Instead of defining the method,
make an alias of destroy! as reject! because of reducing test.
* Clean up reblog-tracking sets from FeedManager
Builds on #5419, with a few minor optimizations and cleanup of sets
after they are no longer needed.
* Update tests, fix multiply-reblogged case
Previously, we would have lost the fact that a given status was
reblogged if the displayed reblog of it was removed, now we don't.
Also added tests to make sure FeedManager#trim cleans up our reblog
tracking keys, fixed up FeedCleanupScheduler to use the right loop,
and fixed the test for it.
* Keep references to all reblogs of a status on home feed
When inserting reblog: Add to set of reblogs of this status on
the feed, if original status was present in the feed, add it to
that set as well.
When removing a reblog: Remove it from that set. Take random
remaining item from the set. If one exists, re-insert it into feed,
otherwise do not re-insert anything.
Fix#4210
* When original is removed, toss out reblog references
We've changed un-reblogging behavior when we implement Snowflake, to insert un-reblogged status at the position reblogging status existed.
However, our API expects home timeline is ordered by status ids, and max_id/since_id filters by zset score. Due to this, un-reblogged status appears as a last item of result set, and timeline expansion may skips many statuses.
So this reverts that change...reblogged status inserted at corresponding position to its id.
* Retoot count increases without reason
-The store_uri method for Statuses was being called on after_create and causing reblogs to be incremented twice.
-This calls it when the transaction is finished by using after_create_commit.
-Fixes #4916.
* Added test case for after_create_commit callback for checking reblog count.
* Rewrote test to keep original, but added one for only the after_create_commit callback.
- Rename Mastodon::TimestampIds into Mastodon::Snowflake for clarity
- Skip for statuses coming from inbox, aka delivered in real-time
- Skip for statuses that claim to be from the future
* Use non-serial IDs
This change makes a number of nontrivial tweaks to the data model in
Mastodon:
* All IDs are now 8 byte integers (rather than mixed 4- and 8-byte)
* IDs are now assigned as:
* Top 6 bytes: millisecond-resolution time from epoch
* Bottom 2 bytes: serial (within the millisecond) sequence number
* See /lib/tasks/db.rake's `define_timestamp_id` for details, but
note that the purpose of these changes is to make it difficult to
determine the number of objects in a table from the ID of any
object.
* The Redis sorted set used for the feed will have values used to look
up toots, rather than scores. This is almost always the same as the
existing behavior, except in the case of boosted toots. This change
was made because Redis stores scores as double-precision floats,
which cannot store the new ID format exactly. Note that this doesn't
cause problems with sorting/pagination, because ZREVRANGEBYSCORE
sorts lexicographically when scores are tied. (This will still cause
sorting issues when the ID gains a new significant digit, but that's
extraordinarily uncommon.)
Note a couple of tradeoffs have been made in this commit:
* lib/tasks/db.rake is used to enforce many/most column constraints,
because this commit seems likely to take a while to bring upstream.
Enforcing a post-migrate hook is an easier way to maintain the code
in the interim.
* Boosted toots will appear in the timeline as many times as they have
been boosted. This is a tradeoff due to the way the feed is saved in
Redis at the moment, but will be handled by a future commit.
This would effectively close Mastodon's #1059, as it is a
snowflake-like system of generating IDs. However, given how involved
the changes were simply within Mastodon, it may have unexpected
interactions with some clients, if they store IDs as doubles
(or as 4-byte integers). This was a problem that Twitter ran into with
their "snowflake" transition, particularly in JavaScript clients that
treated IDs as JS integers, rather than strings. It therefore would be
useful to test these changes at least in the web interface and popular
clients before pushing them to all users.
* Fix JavaScript interface with long IDs
Somewhat predictably, the JS interface handled IDs as numbers, which in
JS are IEEE double-precision floats. This loses some precision when
working with numbers as large as those generated by the new ID scheme,
so we instead handle them here as strings. This is relatively simple,
and doesn't appear to have caused any problems, but should definitely
be tested more thoroughly than the built-in tests. Several days of use
appear to support this working properly.
BREAKING CHANGE:
The major(!) change here is that IDs are now returned as strings by the
REST endpoints, rather than as integers. In practice, relatively few
changes were required to make the existing JS UI work with this change,
but it will likely hit API clients pretty hard: it's an entirely
different type to consume. (The one API client I tested, Tusky, handles
this with no problems, however.)
Twitter ran into this issue when introducing Snowflake IDs, and decided
to instead introduce an `id_str` field in JSON responses. I have opted
to *not* do that, and instead force all IDs to 64-bit integers
represented by strings in one go. (I believe Twitter exacerbated their
problem by rolling out the changes three times: once for statuses, once
for DMs, and once for user IDs, as well as by leaving an integer ID
value in JSON. As they said, "If you’re using the `id` field with JSON
in a Javascript-related language, there is a very high likelihood that
the integers will be silently munged by Javascript interpreters. In most
cases, this will result in behavior such as being unable to load or
delete a specific direct message, because the ID you're sending to the
API is different than the actual identifier associated with the
message." [1]) However, given that this is a significant change for API
users, alternatives or a transition time may be appropriate.
1: https://blog.twitter.com/developer/en_us/a/2011/direct-messages-going-snowflake-on-sep-30-2011.html
* Restructure feed pushes/unpushes
This was necessary because the previous behavior used Redis zset scores
to identify statuses, but those are IEEE double-precision floats, so we
can't actually use them to identify all 64-bit IDs. However, it leaves
the code in a much better state for refactoring reblog handling /
coalescing.
Feed-management code has been consolidated in FeedManager, including:
* BatchedRemoveStatusService no longer directly manipulates feed zsets
* RemoveStatusService no longer directly manipulates feed zsets
* PrecomputeFeedService has moved its logic to FeedManager#populate_feed
(PrecomputeFeedService largely made lots of calls to FeedManager, but
didn't follow the normal adding-to-feed process.)
This has the effect of unifying all of the feed push/unpush logic in
FeedManager, making it much more tractable to update it in the future.
Due to some additional checks that must be made during, for example,
batch status removals, some Redis pipelining has been removed. It does
not appear that this should cause significantly increased load, but if
necessary, some optimizations are possible in batch cases. These were
omitted in the pursuit of simplicity, but a batch_push and batch_unpush
would be possible in the future.
Tests were added to verify that pushes happen under expected conditions,
and to verify reblog behavior (both on pushing and unpushing). In the
case of unpushing, this includes testing behavior that currently leads
to confusion such as Mastodon's #2817, but this codifies that the
behavior is currently expected.
* Rubocop fixes
I could swear I made these changes already, but I must have lost them
somewhere along the line.
* Address review comments
This addresses the first two comments from review of this feature:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336735https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336931
This adds an optional argument to FeedManager#key, the subtype of feed
key to generate. It also tests to ensure that FeedManager's settings are
such that reblogs won't be tracked forever.
* Hardcode IdToBigints migration columns
This addresses a comment during review:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139337452
This means we'll need to make sure that all _id columns going forward
are bigints, but that should happen automatically in most cases.
* Additional fixes for stringified IDs in JSON
These should be the last two. These were identified using eslint to try
to identify any plain casts to JavaScript numbers. (Some such casts are
legitimate, but these were not.)
Adding the following to .eslintrc.yml will identify casts to numbers:
~~~
no-restricted-syntax:
- warn
- selector: UnaryExpression[operator='+'] > :not(Literal)
message: Avoid the use of unary +
- selector: CallExpression[callee.name='Number']
message: Casting with Number() may coerce string IDs to numbers
~~~
The remaining three casts appear legitimate: two casts to array indices,
one in a server to turn an environment variable into a number.
* Only implement timestamp IDs for Status IDs
Per discussion in #4801, this is only being merged in for Status IDs at
this point. We do this in a migration, as there is no longer use for
a post-migration hook. We keep the initialization of the timestamp_id
function as a Rake task, as it is also needed after db:schema:load (as
db/schema.rb doesn't store Postgres functions).
* Change internal streaming payloads to stringified IDs as well
This is equivalent to 591a9af356 from
#5019, with an extra change for the addition to FeedManager#unpush.
* Ensure we have a status_id_seq sequence
Apparently this is not a given when specifying a custom ID function,
so now we ensure it gets created. This uses the generic version of this
function to more easily support adding additional tables with timestamp
IDs in the future, although it would be possible to cut this down to a
less generic version if necessary. It is only run during db:schema:load
or the relevant migration, so the overhead is extraordinarily minimal.
* Transition reblogs to new Redis format
This provides a one-way migration to transition old Redis reblog entries
into the new format, with a separate tracking entry for reblogs.
It is not invertible because doing so could (if timestamp IDs are used)
require a database query for each status in each users' feed, which is
likely to be a significant toll on major instances.
* Address review comments from @akihikodaki
No functional changes.
* Additional review changes
* Heredoc cleanup
* Run db:schema:load hooks for test in development
This matches the behavior in Rails'
ActiveRecord::Tasks::DatabaseTasks.each_current_configuration, which
would otherwise break `rake db:setup` in development.
It also moves some functionality out to a library, which will be a good
place to put additional related functionality in the near future.
Additionally, ActivityPub::FetchRemoteStatusService no longer parses
activities.
OStatus::Activity::Creation no longer delegates to ActivityPub because
the provided ActivityPub representations are not signed while OStatus
representations are.
* Return sensible HTTP status for ActivityPub inbox processing
* Return sensible HTTP status for salmon slap processing
* Return additional information to debug signature verification failures
* Fix order of paginated accounts in FollowerDomainsController
Unordered pagination could result in unexpected behavior.
* Cover Settings::FollowerDomainsController more
* Fix#117 - Add ability to specify alternative text for media attachments
- POST /api/v1/media accepts `description` straight away
- PUT /api/v1/media/:id to update `description` (only for unattached ones)
- Serialized as `name` of Document object in ActivityPub
- Uploads form adjusted for better performance and description input
* Add tests
* Change undo button blend mode to difference
A new rake task emojis:generate downloads a full list of valid
unicode sequences from unicode.org and checks it against existing
Twemoji files, finally generating a map from each sequence to the
existing file (e.g. when there's multiple ways an emoji can be
expressed). The map is dumped into app/javascript/mastodon/emoji_map.json
That file is loaded by emojione_light.js (now a misnomer) which
decorates it further with shortcodes taken from emoji-mart's index.
* Add emoji autosuggest
Some credit goes to glitch-soc/mastodon#149
* Remove server-side shortcode->unicode conversion
* Insert shortcode when suggestion is custom emoji
* Remove remnant of server-side emojis
* Update style of autosuggestions
* Fix wrong emoji filenames generated in autosuggest item
* Do not lazy load emoji picker, as that no longer works
* Fix custom emoji autosuggest
* Fix multiple "Custom" categories getting added to emoji index, only add once
* Fix JavaScript interface with long IDs
Somewhat predictably, the JS interface handled IDs as numbers, which in
JS are IEEE double-precision floats. This loses some precision when
working with numbers as large as those generated by the new ID scheme,
so we instead handle them here as strings. This is relatively simple,
and doesn't appear to have caused any problems, but should definitely
be tested more thoroughly than the built-in tests. Several days of use
appear to support this working properly.
BREAKING CHANGE:
The major(!) change here is that IDs are now returned as strings by the
REST endpoints, rather than as integers. In practice, relatively few
changes were required to make the existing JS UI work with this change,
but it will likely hit API clients pretty hard: it's an entirely
different type to consume. (The one API client I tested, Tusky, handles
this with no problems, however.)
Twitter ran into this issue when introducing Snowflake IDs, and decided
to instead introduce an `id_str` field in JSON responses. I have opted
to *not* do that, and instead force all IDs to 64-bit integers
represented by strings in one go. (I believe Twitter exacerbated their
problem by rolling out the changes three times: once for statuses, once
for DMs, and once for user IDs, as well as by leaving an integer ID
value in JSON. As they said, "If you’re using the `id` field with JSON
in a Javascript-related language, there is a very high likelihood that
the integers will be silently munged by Javascript interpreters. In most
cases, this will result in behavior such as being unable to load or
delete a specific direct message, because the ID you're sending to the
API is different than the actual identifier associated with the
message." [1]) However, given that this is a significant change for API
users, alternatives or a transition time may be appropriate.
1: https://blog.twitter.com/developer/en_us/a/2011/direct-messages-going-snowflake-on-sep-30-2011.html
* Additional fixes for stringified IDs in JSON
These should be the last two. These were identified using eslint to try
to identify any plain casts to JavaScript numbers. (Some such casts are
legitimate, but these were not.)
Adding the following to .eslintrc.yml will identify casts to numbers:
~~~
no-restricted-syntax:
- warn
- selector: UnaryExpression[operator='+'] > :not(Literal)
message: Avoid the use of unary +
- selector: CallExpression[callee.name='Number']
message: Casting with Number() may coerce string IDs to numbers
~~~
The remaining three casts appear legitimate: two casts to array indices,
one in a server to turn an environment variable into a number.
* Back out RelationshipsController Change
This was made to make a test a bit less flakey, but has nothing to
do with this branch.
* Change internal streaming payloads to stringified IDs as well
Per
https://github.com/tootsuite/mastodon/pull/5019#issuecomment-330736452
we need these changes to send deleted status IDs as strings, not
integers.
* Custom emoji
- In OStatus: `<link rel="emoji" name="coolcat" href="http://..." />`
- In ActivityPub: `{ type: "Emoji", name: ":coolcat:", href: "http://..." }`
- In REST API: Status object includes `emojis` array (`shortcode`, `url`)
- Domain blocks with reject media stop emojis
- Emoji file up to 50KB
- Web UI handles custom emojis
- Static pages render custom emojis as `<img />` tags
Side effects:
- Undo #4500 optimization, as I needed to modify it to restore
shortcode handling in emojify()
- Formatter#plaintext should now make sure stripped out line-breaks
and paragraphs are replaced with newlines
* Fix emoji at the start not being converted
* Fix ActivityPub handling of replies when LOCAL_DOMAIN ≠ WEB_DOMAIN (#4895)
For all intents and purposes, `local_url?` is used to check if an URL refers
to the Web UI or the various API endpoints of the local instances. Those things
reside on `WEB_DOMAIN` and not `LOCAL_DOMAIN`.
* Change local_url? spec, as all URLs handled by Mastodon are based on WEB_DOMAIN
David Underwood