* Update room summary card header
* test coverage for public room label
* test coverage for public room label (#11841)
* fix encrypted badge selector in cypress/crypto.spec
---------
Co-authored-by: Kerry <kerrya@element.io>
* Re-enable QR verification cypress test for Element-R
This test was disabled by
https://github.com/matrix-org/matrix-react-sdk/pull/11710. The impl has now
been fixed, so it should be possible to re-enable it now.
While we're here, rename a couple of the tests for clarity.
* fix lint
* Check that the new verified device is connected to key backup
* Review changes. Extract key backup verification in its own function and chang parameter order of bot `bootstrapSecretStorage` call.
* Fix a flaky cypress crypto test
We need to be a bit proactive to get existing shields to update when a device
is deleted.
* Handle different text between rust and legacy crypto
* Use new crypto-api for cross user verification
* update verification flow with new APIs
* Replace some calls to `checkUserTrust`
A start on https://github.com/vector-im/crypto-internal/issues/147
* Enable cypress tests
* update tests
* Delegate decisions on event shields to the js-sdk
* rerender after editing events
This is required because a transition from "valid event" to "unencrypted event"
no longer triggers a state change, so the component does not render
itself. Previously, this would be a transition from `verified:
E2EState.Normal` to `verified: null`.
* Update tests
* prettier
* Test coverage
* Enable cypress tests for shields with rust crypto
---------
Co-authored-by: Florian Duros <florianduros@element.io>
* Use new crypto-api for cross user verification
* update verification flow with new APIs
* Replace some calls to `checkUserTrust`
A start on https://github.com/vector-im/crypto-internal/issues/147
* Enable cypress tests
* update tests
* Delegate decisions on event shields to the js-sdk
* rerender after editing events
This is required because a transition from "valid event" to "unencrypted event"
no longer triggers a state change, so the component does not render
itself. Previously, this would be a transition from `verified:
E2EState.Normal` to `verified: null`.
* Update tests
* prettier
* Test coverage
---------
Co-authored-by: Florian Duros <florianduros@element.io>
There is a little-known feature where, if you have verified a user (eg, via the
emoji game), then when you mouse-over a message that they sent, it gets a green
highlight.
We also show a brown bar sometimes, and according to the CSS there may be a
yellow bar too?
Very few people seem to know this exists, and even if you do know it exists
nobody seems to understand what exactly the various colours are supposed to be.
So, rather than porting this magic mystery feature to Rust Crypto, let's rip it
out.
* Update all non-major dependencies
* Add isLocation to ComposerEvent analytics events
* Remove cypress-each as it is incompatible with modern typescript
* Roll back eslint-plugin-deprecate
* Remove stale comment
---------
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Andy Balaam <andy.balaam@matrix.org>
Co-authored-by: Michael Telatynski <7t3chguy@gmail.com>
* Run cypress test without `cryptoCallbacks`
* Add security phrase test
* Add security key test
* Fix type import
* Move new test in `verification.spec.ts`
* The nest tests work with the new crypto
* Fix import yupe
* Cypress: `crypto.verification.request` -> `crypto.verificationRequestReceived`
matrix-org/matrix-js-sdk#3514 deprecated crypto.verification.request.
* Cypress: `beginKeyVerification` -> `startVerification`
matrix-org/matrix-js-sdk#3528 deprecated beginKeyVerification
* simplify `setupBotClient`
no functional change here, just combining the various `cy.wrap()`ed things into
a single async func
* Cypress: Use Rust crypto for the bot user in verification tests
We can already start using the Rust crypto implementation for the "bot" user in
the verification tests!
* Cypress: move verification tests to their own file
* Remove redundant cypress test
This does nothing that the verification test doesn't do better.
* Factor `beginKeyVerification` call out of `doTwoWaySasVerification`
... for more flexibility. This allows us to have tests where the other side
picks the verification method.
* Cypress test for incoming verification requests
* Update references to `VerificationRequestEvent`
* Update references to `Phase`
* update references to legacy `PHASE_*` constants
* Replace `request.canAccept` with `canAcceptVerificationRequest`
* Replace `VerificationRequest` with the interface throughout
* Minor strict type fixes
* Add a couple of tests
* Add WIP Sas cross-signing test
* Login after bot creation
* Figuring out how to make it work in ci
* Wait for `r0/login` to be called before bot creation
* Make waitForVerificationRequest automatically accept requests
... thereby making the `acceptVerificationRequest` helper redundant
* Clean up `deviceIsCrossSigned`
* combine `handleVerificationRequest` and `verifyEmojiSas`
* get rid of a layer
... it adds no value
* fix bad merge
* minor cleanups to new test
* Move `logIntoElement` to utils module
* use `logIntoElement` function
* Avoid intercept
* Avoid `CryptoTestContext`
---------
Co-authored-by: Richard van der Hoff <richard@matrix.org>
* Cypress: skip tests known to fail when using Rust crypto
... which means we can then run the cypress test suite against Element Web R to
check we aren't introducing regressions.
* Update cypress/e2e/register/register.spec.ts
* Use env var to detect rust crypto
* Hoist `skipIfRustCrypto` call earlier
* Remove redundant `verifier.done()` call
This `done` call completes the verification process and stops it responding
with further messages. It is unnecessary, *provided* the verification completes
successfully, for which see
https://github.com/matrix-org/matrix-js-sdk/pull/3382.
* Remove duplicated code in `decryption-failure` test
* remove unused imports
* Use grid layout instead
- BEM naming style
- Increase block gap from 4px to 8px
- Use flexbox inside 'header' grid-area to let the buttons wrapped
- Use variables
- Remove 4px gap when one of the buttons is not rendered
- Change 'body' to 'message'
- Set 'align-self: start' to the icon and spinner
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Unset height of spinner
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Break lines at newline characters with white-space: pre-line
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Edit tests to check decryption failure bars on narrow timeline
- checkTimelineNarrow() looks for buttons by default
- Test indicator as well
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Remove a line
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Edit the test to have it check mx_EventTile_last only inside mx_RoomView_body
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Fix double underscores
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Fix double underscores - pcss
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Iterate - buttons at the bottom
- Set common spacing to buttons with variables
- Remove line breaks, yarn run i18n
- Set data-testid for headlines and buttons in case the tested strings would be displayed elsewhere simultaneously
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Check waiting headline as well
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Increase spacing between the message and the buttons
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* lint
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Increase block gap between wrapped buttons for clickability
Apply 8px between wrapped buttons
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Revert bottom margin of buttons which are not expected to be wrapped
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Check visibility instead of existence
This commit removes data-testid from headlines and data-testid-button and checks whether the elements are really visible, not overflowing the viewport.
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Remove redundant gap between 'mx_DecryptionFailureBar_start' and the bottom edge
This commit adds '.mx_DecryptionFailureBar--withEnd' class name to have it applied to the bar only if it has button(s). This way the bar is rendered with a flexbox and the row-gap declaration is respected only if there is a 'mx_DecryptionFailureBar--withEnd' element. The element currently includes the button(s) only.
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* lint - prettier
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Have Percy take a snapshot of the bar loading spinner before checkTimelineNarrow()
The loading spinner is likely to disappear while checking the bar on the narrow timeline.
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
---------
Signed-off-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
Co-authored-by: Kerry <kerrya@element.io>
* Minimum hacks required to run cypress tests with dendrite
* Remove wget hack since dendrite containers now have curl
* Add basic dendritedocker plugin & hack into login spec for testing
* Add generic HomeserverInstance interface
* Add env var to configure which homeserver to use
* Remove synapse specific homeserver support api
* Update the rest of the tests to use HomeserverInstance
* Update cypress docs to reference new homeserver abstraction
* Fix formatting issues
* Change dendrite to use main branch container
Germain