peoplecounter, IR, spacestatus, proxy config, amplifier

README.txt

@@ -1,4 +1,13 @@
+An openHAB implementaiton for the level2 hackerspace
+
+Dump this into /etc/openhab2
+
+
+
+
+
 Installing proxy for paperUI
+
 sudo bash
 apt-get update
 apt-get install nginx
@@ -8,13 +17,29 @@ cat >/etc/nginx/sites-available/openhab <<"EOF"
 server {
     listen          80;
     server_name     lights.level2.lu;
-
+# https://community.openhab.org/t/occasional-offline-in-basicui-when-proxying-via-nginx-connection-timed-out/63347
     location / {
-        proxy_pass                            http://localhost:8080/basicui/;
+        proxy_pass                            http://localhost:8080/;
+            proxy_buffering                 off;
+            proxy_request_buffering         off;
+            proxy_http_version              1.1;
         proxy_set_header Host                 $http_host;
         proxy_set_header X-Real-IP            $remote_addr;
         proxy_set_header X-Forwarded-For      $proxy_add_x_forwarded_for;
         proxy_set_header X-Forwarded-Proto    $scheme;
+        proxy_set_header X-Forwarded-Host $host:$server_port;
+        proxy_set_header X-Forwarded-Server $host;
+            client_body_buffer_size         0;
+            client_max_body_size            0;
+            proxy_max_temp_file_size        0;
+            proxy_read_timeout              18000;
+            proxy_send_timeout              18000;
+
+            gzip                            off;
+    }
+    location ~ ^/(paperui|habmin) {
+        # return 301 /basicui/app;
+        deny all;
     }
 }
 EOF

items/level2.items

@@ -12,14 +12,16 @@ Group   area42          "Area42"        (main_floor)
 //-------------------------------------------------------------------------------
 
 Number  entrance_people_counter         "People Counter [%s]"   <parents_1_1> (entrance)
+Number  entrance_people_counter_max     "People Counter Max [%s]"   <parents_1_1> (entrance)
 Switch  entrance_door_status            "Door Status"                                       { channel="mqtt:topic:entrance_door_status:status"     }
 Switch  entrance_ceiling_lamps          "Ceiling Lamps"         <lightbulb> (entrance)      { channel="mqtt:topic:entrance_ceiling_lamps:power"    }
+Switch  entrance_marbleadder_lamps       "Marbleadder Lamps"     <lightbulb> (entrance)      { channel="mqtt:topic:mosquitto:entrance_marbleadder_lamps:power"  }
 Switch  chill_zone_lamps                "Lamps"                 <lightbulb> (chill_zone)    { channel="mqtt:topic:chill_zone_lamps:power"          }
 Switch  engineering_table_lamps         "Table Lamps"           <lightbulb> (engineering)   { channel="mqtt:topic:engineering_table_lamps:power"   }
 Switch  engineering_ceiling_lamps       "Ceiling Lamps"         <lightbulb> (engineering)   { channel="mqtt:topic:engineering_ceiling_lamps:power" }
 Switch  engineering_status_lamp         "Status Lamp"           <lightbulb> (engineering)   { channel="mqtt:topic:engineering_status_lamp:power"   }
 Switch  engineering_ceiling_phone_flash "Ceiling Phone Flash"   <lightbulb> (engineering)   { channel="mqtt:topic:engineering_phone_flash:pulse"   }
-Switch  area42_status_lamp              "Status Lamp"           <lightbulb> (area42)        { channel="mqtt:topic:area42_status_lamp:power"        }
+Switch  area42_status_lamp              "Status Lamp"           <lightbulb> (area42)        { channel="mqtt:topic:mosquitto:area42_status_lamp:power" }
 Switch  lab_soldering_table             "Soldering table"       <lightbulb> (lab)           { channel="mqtt:topic:mosquitto:lab_soldering_table:power" }
 
 
@@ -41,6 +43,26 @@ String  chill_zone_chromecast_status
 Switch  chill_zone_beamer
     "Beamer"
     (chill_zone)
+String chill_zone_beamer_input          "beamer input"      (chill_zone)
+// please help: beamer current state can be optained like this:
+//wget -qO - 'http://10.2.113.7/tgi/return.tgi?query=info' |awk -F'[<>]' '/<info>/{print substr($3,33,2)}'
+// the awk extracts the info. It is in format '<return>NG</return>' or '<return><info>data</info></return>
+//NG = off
+// from data, the interesting part is chars 33 and 34
+//                                vv
+//2a3139c616503735303000000048e60102ac0c010076
+//00=no signal
+//01=VGA1
+//02=DVI (slideshow)
+//03=composite
+//04=s-video
+//05=component
+//09=VGA2
+//11=LAN 
+//12=USB A (presentation to go)
+//13=USB B (WTF?)
+//15=hdmi2 (chromecast)
+
 
 // ----------------------------------------------------------------------------
 
@@ -63,6 +85,6 @@ Switch chill_zone_screen_button_down
 Rollershutter chill_projection_screen "Projection Screen"
 
 
-String IRCode_01		"IR Code"			{ channel="mqtt:topic:mosquitto:irremote:ir_code" }
+String IRCode		"IR Code"			{ channel="mqtt:topic:mosquitto:irremote:ir_code" }
 String proxyIR
          

items/statuslights.items

@@ -0,0 +1 @@
+Switch  all_status_lights       "All Status Lights"         <lightbulb> (engineering)

persistence/mapdb.persist

@@ -4,4 +4,5 @@ Strategies {
 
 Items {
     entrance_people_counter: strategy = everyChange
+    entrance_people_counter_max: strategy = everyChange
 }

rules/alllights.rules

@@ -7,6 +7,7 @@ then
   //all_engineering_lights.postUpdate("ON")
   chill_zone_lamps.sendCommand("ON")
   entrance_ceiling_lamps.sendCommand("ON")
+  entrance_marbleadder_lamps.sendCommand("ON")
 end
 
 
@@ -18,6 +19,7 @@ then
   engineering_ceiling_lamps.sendCommand("OFF")
   chill_zone_lamps.sendCommand("OFF")
   entrance_ceiling_lamps.sendCommand("OFF")
+  entrance_marbleadder_lamps.sendCommand("OFF")
 end
 
 

rules/ir.rules

@@ -2,5 +2,5 @@ rule "proxy IR mqtt"
 when
     Item proxyIR received command
 then
-    IRCode_01.sendCommand(transform("MAP", "ir.map", receivedCommand.toString))
+    IRCode.sendCommand(transform("MAP", "ir.map", receivedCommand.toString))
 end

rules/level2.rules

@@ -1,35 +1,69 @@
 
 var Timer ChromeCastOffTimer = null
+val peoplecountermax = 0  // if openhab is restarted, the max value is lost... do we need persistence, how does that work?
+val SpaceStatus = ''
+
+rule "Startup"
+when
+    System started
+then
+  if (entrance_door_status.state.toString == 'OFF') {
+      SpaceStatus = 'open'
+  } else { 
+      SpaceStatus = 'closed'
+  }
+end
 
 rule "Door Status"
 when
     Item entrance_door_status changed
 then
     val state = entrance_door_status.state.toString
-
+    val peoplecountermax 
     // the sensor state is inverted:
     //   OFF means opened
     //   ON  means opened
     if (state == 'OFF') {
         logInfo('door', 'opened')
+        SpaceStatus = 'open'
         entrance_ceiling_lamps.sendCommand("ON")
+        entrance_marbleadder_lamps.sendCommand("ON")
         chill_zone_lamps.sendCommand("ON")
         engineering_table_lamps.sendCommand("ON")
         engineering_ceiling_lamps.sendCommand("ON")
         engineering_status_lamp.sendCommand("ON")
         area42_status_lamp.sendCommand("ON")
+        executeCommandLine("/etc/openhab2/syn2cat/spaceapi-set-status.sh open")
+        // needs current time in OpenTime
+        // sendTweet("It's "+OpenTime+" and we are open \o/ \ncome in and create something awesome =) \nhttps://Level2.lu/openingTimes")
+
     } else {
         logInfo('door', 'closed')
+        SpaceStatus = 'closed'
         // turn the beamer off
         sendHttpGetRequest("http://10.2.113.7/tgi/return.tgi?command=2a3102fd0660")
         chill_zone_screen_button_up.sendCommand("ON")
         entrance_ceiling_lamps.sendCommand("OFF")
+        entrance_marbleadder_lamps.sendCommand("OFF")
         chill_zone_lamps.sendCommand("OFF")
         engineering_table_lamps.sendCommand("OFF")
         engineering_ceiling_lamps.sendCommand("OFF")
         engineering_status_lamp.sendCommand("OFF")
         area42_status_lamp.sendCommand("OFF")
         lab_soldering_table.sendCommand("OFF")
+        IRCode.sendCommand(transform("MAP", "ir.map", "amp_off"))
+        executeCommandLine("/etc/openhab2/syn2cat/spaceapi-set-status.sh closed")
+        // needs current time in OpenTime
+        // and number of people in peopleMax="\nThere were up to $peopleMax hackers today.\n"
+        peoplecountermax=entrance_people_counter_max.state
+        if(peoplecountermax>8) {
+            peopleMax="\nThere were up to "+peoplecountermax+" hackers today.\n"
+        } else {
+            peopleMax=".".repeat(peoplecountermax)
+        }
+        logInfo("door", "twitter message: "+ OpenTime+peopleMax)
+        // sendTweet("We just closed our doors at "+OpenTime+peopleMax+" See you very soon... \nhttps://Level2.lu/openingTimes")
+        entrance_people_counter_max.postUpdate(0) 
     }
     
     
@@ -47,10 +81,26 @@ then
     val count = java.lang.Integer.parseInt(
         transform("XPATH", "/table/tr[4]/td[2]/text()", response).trim()
     )
+    if ( SpaceStatus == 'closed' ) {
+        count=0
+    }
     if ( count != Integer.parseInt(entrance_people_counter.previousState().state.toString)) {
         entrance_people_counter.postUpdate(count)
+        // fresh run needs a max init, later we use persistence to init
+        if (entrance_people_counter_max.state == NULL) {entrance_people_counter_max.postUpdate(count) }
+        // count is bigger, so we got a new maximum
+        if(entrance_people_counter_max.state < count) { 
+            entrance_people_counter_max.postUpdate(count) 
+            logInfo("door", "People counter maximum set to "+ count)
+        }
+        executeCommandLine("/etc/openhab2/syn2cat/spaceapi-update-peoplecount.sh "+count)
     }
 end
+        // moved this to some external scripts, way easier with debugging and quoting
+        // /usr/bin/curl --max-time 1 --silent --data key="$spaceapikey" --data-urlencode 'sensors={"sensors":{"people_now_present":[{"value":'"$presency"'}]}}' https://spaceapi.syn2cat.lu/sensor/set
+        // executeCommandLine("/usr/bin/curl -v --max-time 1 --data key=$(cat /etc/openhab2/spaceapikey.txt) --data-urlencode 'sensors={\"sensors\":{\"people_now_present\":[{\"value\":'+count+'}]}}' https://spaceapi.syn2cat.lu/sensor/set >/tmp/c.log 2>&1")
+        // needs import java.net.URLEncoder
+        // sendHttpGetRequest("https://spaceapi.syn2cat.lu/sensor/set?"+URLEncoder::encode('key='+spaceapikey+'&sensors={sensors":{"people_now_present":[{"value":'+count+'}]}}')
 
 // ----------------------------------------------------------------------------
 
@@ -58,7 +108,8 @@ rule "Tweet People Count"
 when
     Item entrance_people_counter changed
 then
-//   sendTweet('There are currently ' + entrance_people_counter.state.toString + ' hackers present. Just pass by!')
+    // val people = entrance_people_counter.state.toString
+    // sendTweet('There are currently ' + people + ' hackers present. Just pass by!')
 end
 
 // ----------------------------------------------------------------------------
@@ -87,15 +138,39 @@ then
 
     if (state == 'ON') {
         // turn the beamer on
-        beamerResponse = sendHttpGetRequest("http://10.2.113.7/tgi/return.tgi?command=2a3101fe0660") 
+        beamerResponse = sendHttpGetRequest("http://10.2.113.7/tgi/return.tgi?command=2a3101fe0660")
+        chill_zone_screen_button_down.sendCommand("ON")
     } else {
         // turn the beamer off
-        beamerResponse = sendHttpGetRequest("http://10.2.113.7/tgi/return.tgi?command=2a3102fd0660")
+        beamerResponse = sendHttpGetRequest("http://10.2.113.7/tgi/return.tgi?command=2a3102fd0660")     
     }
     val beamerStatus = transform("XPATH", "/return/text()", beamerResponse).replace("\n", '')
     logInfo("beamer", "Beamer state: {}", beamerStatus)
 end
 
+rule "Beamer input"
+when
+    Item chill_zone_beamer_input received command
+then
+    val state = chill_zone_beamer_input.state.toString
+    var beamerResponse
+
+    if (state == 'hdmi1') {
+        beamerResponse = sendHttpGetRequest("http://10.2.113.7/tgi/return.tgi?command=2a3109f6071475") 
+    } else  if (state == 'hdmi2') {
+        beamerResponse = sendHttpGetRequest("http://10.2.113.7/tgi/return.tgi?command=2a3109f6071576")     
+    } else if (state == 'dvi') {
+        beamerResponse = sendHttpGetRequest("http://10.2.113.7/tgi/return.tgi?command=2a3109f6070566")
+    } else if (state == 'vga1') {
+        beamerResponse = sendHttpGetRequest("http://10.2.113.7/tgi/return.tgi?command=2a3109f6070162")
+    } else if (state == 'vga2') {
+        beamerResponse = sendHttpGetRequest("http://10.2.113.7/tgi/return.tgi?command=2a3109f6070263")  
+    }
+    else { }
+    val beamerStatus = transform("XPATH", "/return/text()", beamerResponse).replace("\n", '')
+    logInfo("beamer", "Beamer state: {}", beamerStatus)
+end
+
 // ----------------------------------------------------------------------------
 
 

rules/statuslights.rules

@@ -0,0 +1,15 @@
+rule "Status Lights ON"
+when
+  Item all_status_lights received update ON
+then
+  engineering_status_lamp.sendCommand("ON")
+  area42_status_lamp.sendCommand("ON")
+end
+
+rule "Status Lights OFF"
+when
+  Item all_status_lights received update OFF
+then
+  engineering_status_lamp.sendCommand("OFF")
+  area42_status_lamp.sendCommand("OFF")
+end

services/addons.cfg

@@ -26,7 +26,7 @@
 # Include legacy 1.x bindings. If set to true, it also allows the installation of 1.x bindings for which there is 
 # already a 2.x version available (requires remote repo access, see above). (default is false)
 #
-legacy = true
+legacy = false
 
 # A comma-separated list of bindings to install (e.g. "binding = sonos,knx,zwave")
 binding = chromecast,mqtt,http1,exec,systeminfo
@@ -38,7 +38,7 @@ ui = basic,habmin,habpanel,paper
 persistence = mapdb
 
 # A comma-separated list of actions to install (e.g. "action = mail,pushover")
-action = mail,twitter,mqtt
+action = mail,twitter
 
 # A comma-separated list of transformation services to install (e.g. "transformation = map,jsonpath")
 transformation = jsonpath,map,regex,scale,xpath

sitemaps/default.sitemap

@@ -5,49 +5,51 @@ sitemap default label="Level2" {
       Switch item=all_lights label="All Lights" icon="light"
     }
     Frame label="Multimedia" {
-      Switch item=chill_zone_beamer label="Beamer" icon="projector"
+      Switch item=chill_zone_beamer label="Beamer" icon="projector" mappings=[ON="on",OFF="off"]
+      Selection item=chill_zone_beamer_input label="input" mappings=['hdmi1'='HDMI','hdmi2'='Chromecast','dvi'='Slideshow','vga1'='VGA']
       // mir brauchen en screen rule mat 3 status dei een kann setzen
       // Switch item=chill_zone_screen_button_up label="Projection Screen (todo)" icon="screen" mappings=[up="up",stop="stop",down="down"]
       Switch item=chill_projection_screen icon="screen" mappings=[UP="up",STOP="stop",DOWN="down"]
+    }
 
-      Frame label="Amplifier" {
+    Frame label="Amplifier" {
-	      Switch item=proxyIR label="power" mappings=['amp_on'='on','amp_off'='off']
+	    Switch item=proxyIR label="power" mappings=['amp_on'='on','amp_off'='off']
-        Switch item=proxyIR label="volume" mappings=['amp_volup'='up','amp_voldown'='down']
+      Switch item=proxyIR label="volume" mappings=['amp_volup'='up','amp_voldown'='down']
-        Selection item=proxyIR label="input" mappings=['amp_jack1'='jack1','amp_jack2'='jack2','amp_hdmi'='hdmi','amp_optical'='optical','amp_cd'='cd','amp_tuner'='tuner']
+      Selection item=proxyIR label="input" mappings=['amp_jack1'='jack1','amp_jack2'='jack2','amp_hdmi'='hdmi','amp_optical'='optical','amp_cd'='cd','amp_tuner'='tuner']
-	    }
+	  }
-          Frame label="Bluray" {
+    Frame label="Bluray" {
-        Switch item=proxyIR label="power" mappings=['br_power'='power']
+      Switch item=proxyIR label="power" mappings=['br_power'='power']
-        Switch item=proxyIR label="play" mappings=['br_play'='play','br_pause'='pause'] icon="mediacontrol"
+      Switch item=proxyIR label="play" mappings=['br_play'='play','br_pause'='pause'] icon="mediacontrol"
-        Switch item=proxyIR label="control" mappings=['br_menu'='menu','br_ok'='ok']
+      Switch item=proxyIR label="control" mappings=['br_menu'='menu','br_ok'='ok']
-        Switch item=proxyIR label="navigate" mappings=['br_left'='left','br_up'='up','br_down'='down','br_right'='right'] icon="movecontrol"
+      Switch item=proxyIR label="navigate" mappings=['br_left'='left','br_up'='up','br_down'='down','br_right'='right'] icon="movecontrol"
-        Switch item=proxyIR label="language" mappings=['br_language'='audio','br_subtitle'='subtitles']
+      Switch item=proxyIR label="language" mappings=['br_language'='audio','br_subtitle'='subtitles']
-      }
     }
     Frame label="Other" {
       // een knaeppchen deen nemmen aus geht
       Switch item=lab_soldering_table label="Soldering Table" icon="poweroutlet" mappings=[OFF="off"]
       Switch item=engineering_ceiling_phone_flash label="Phone flashlight" icon="siren" mappings=[OFF="off"]
       // wei switchen ech dei 2 status lights?. Dat hei ass fir status un ze maachen falls se net un wiren
-      Switch item=area42_status_lamp label="Status lights (todo)" mappings=[ON="ON"]
+      Switch item=all_status_lights label="Status lights" mappings=[ON="on"]
     }
-    Frame label="Main Floor" icon="firstfloor" {
+//    Frame label="Main Floor" icon="firstfloor" {
-        Group item=engineering
+//        Group item=engineering
-        // Group item=lab
+//        // Group item=lab
-        Group item=chill_zone
+//        Group item=chill_zone
-        Group item=entrance
+//        Group item=entrance
+//
+//        // Selection item=chill_zone_beamer_input 
+//        //     label="Beamer Input" 
+//        //     mappings=[
+//        //         0="DVI",    // Hackerspace video
+//        //         1="HDMI 1", 
+//        //         2="HDMI 2", // Chromecast
+//        //         3="VGA 1",
+//        //         4="VGA 2"
+//        //     ]
+//    }
 
-        // Selection item=chill_zone_beamer_input 
+//    Frame label="Ground Floor" icon="groundfloor" {
-        //     label="Beamer Input" 
+//        Group item=ground_floor
-        //     mappings=[
+//        // Image url="https://raw.githubusercontent.com/wiki/openhab/openhab/images/features.png"
-        //         0="DVI",    // Hackerspace video
+//    }
-        //         1="HDMI 1", 
-        //         2="HDMI 2", // Chromecast
-        //         3="VGA 1",
-        //         4="VGA 2"
-        //     ]
-    }
-    Frame label="Ground Floor" icon="groundfloor" {
-        Group item=ground_floor
-        // Image url="https://raw.githubusercontent.com/wiki/openhab/openhab/images/features.png"
-    }
 }

syn2cat/.gitignore

@@ -0,0 +1 @@
+spaceapikey.txt

syn2cat/spaceapi-set-status.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+set -x
+exec >>/tmp/c.log
+exec 2>&1
+if [ "$1" = "" ] || ( [ "$1" != "open" ] && [ "$1" != "closed" ] )
+then
+  echo "usage: $0 {open|closed}"
+  exit 1
+fi
+spaceapikey="$(cat "$(dirname $0)"/spaceapikey.txt)"
+nai=$(date +%s)
+case "$1" in 
+    "open" )
+       openstate="true"
+       ;;
+    "closed" ) 
+       openstate="false"
+       ;;
+   * ) echo "error"
+       exit
+       ;;
+esac
+/usr/bin/curl --max-time 1 --silent --data key="$spaceapikey" --data-urlencode sensors='{"state":{"open":'"$openstate"',"lastchange":'"$nai"'}}' https://spaceapi.syn2cat.lu/sensor/set
+

syn2cat/spaceapi-update-peoplecount.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+set -x
+exec >>/tmp/c.log
+exec 2>&1
+if [ "$1" = "" ]
+then
+  echo "usage: $0 number"
+  exit 1
+fi
+spaceapikey="$(cat "$(dirname $0)"/spaceapikey.txt)"
+presency="$1"
+/usr/bin/curl --max-time 1 --silent --data key="$spaceapikey" --data-urlencode sensors='{"sensors":{"people_now_present":[{"value":'"$presency"'}]}}' https://spaceapi.syn2cat.lu/sensor/set
+

things/level2.things

@@ -14,13 +14,20 @@ Bridge mqtt:broker:mosquitto "Mosquitto" [
                 stateTopic="stat/entrance/door_status/POWER"
             ]
     }
-
+    
     Thing topic entrance_ceiling_lamps "Entrance Ceiling Lamps" @ "Entrance" {
         Channels:
             Type switch : power  "Power"  [
                 commandTopic="cmnd/entrance/ceiling_lamp/Power"
             ]
     }
+    
+    Thing topic entrance_marbleadder_lamps "Entrance Marbleadder Lamps" @ "Entrance" {
+        Channels:
+            Type switch : power  "Power"  [
+                commandTopic="cmnd/entrance/marbleadder_lamp/Power"
+            ]
+    }
 
     // ----------------------------------------------------------------------------
 
@@ -45,6 +52,7 @@ Bridge mqtt:broker:mosquitto "Mosquitto" [
                 commandTopic="cmnd/chill_zone/sonoffs/Power"
             ]
     }
+    Thing exec:command:beamerpower [command="/sbin/apcaccess -u", interval=5, timeout=2, autorun=false]
 
     // ----------------------------------------------------------------------------
 
@@ -90,7 +98,7 @@ Bridge mqtt:broker:mosquitto "Mosquitto" [
     Thing topic lab_soldering_table "Soldering table" @ "Lab" {
         Channels:
             Type switch : power  "Power"  [
-                commandTopic="cmnd/lab/soldering_table/Power", stateTopic="stat/lab/soldering_table/Power"
+                commandTopic="cmnd/lab/soldering_table/Power", stateTopic="stat/lab/soldering_table/POWER"
             ]
     }
 
@@ -100,7 +108,8 @@ Bridge mqtt:broker:mosquitto "Mosquitto" [
     Thing topic irremote "IR remote" @ "Chill Zone" {
 
             Type string : ir_code "ircode" 
-            [ commandTopic="cmnd/chill_zone/irremote/IRSEND"
+            [ 
+                commandTopic="cmnd/chill_zone/irremote/IRSEND"
             ]
 
     }
@@ -110,4 +119,4 @@ Bridge mqtt:broker:mosquitto "Mosquitto" [
 Thing chromecast:chromecast:b000d809ccb35a409a3dd3d14e0fbf08 [ipAddress="10.2.113.120", port=8009]
 
 //Thing exec:command:meaow [command="espeak -s 250 'meow meow meow meow meow meow meow meow' && espeak -s 250 -p 99 'meow meow meow meow meow meow' && espeak -s 250 -p 10 'meow meow meow meow meow meow' && espeak -s 30 -p 1 'meow meow meow meow'", autorun=false]
-//Thing exec:command:meaow [command="espeak -s 250 'meow meow meow meow meow meow meow meow'", autorun=false]
+//Thing exec:command:meaow [command="espeak -s 250 'meow meow meow meow meow meow meow meow'", autorun=false]