Pidor is controlling the state of Level2 on the website, spaceapi and twitter This documentation is work in progress, sorry about that. Connectivity connect the doorlock relay to gpio 7 connect button of doorlock to gpio 11 connect the 433mhz transmitter to pin 2 (gpio 17) Install put raspian image on SD card and put into rPi ssh to pi@ if that does not work, edit the SD card and put into etc/rc.local "/etc/init.d/ssh start" sudo bash # all is installed under root apt-get install php5-curl # for twitter apt-get install git # for getting this apt-get install wiringpi # for the buttons and stuff apt-get install gawk # raspian has mawk by default which lacks time functions tzselect comment out the last 4 lines of rsyslogd.conf (for xconsole) like explained here https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=122601 echo "pidor" > /etc/hostname sed -i 's/^127.0.1.1.*/127.0.1.1 pidor/' /etc/hosts cp -p systemfiles/sudoers.d/* /etc/sudoers.d/ mkdir /root/var # kinda important put your ssh key in git and on the pi's /root/.ssh cd /root git clone git@github.com:syn2cat/pidor.git cd pidor git config --global user.email "pidor@level2.lu" git config --global user.name pidor # set fixed IP at end of /etc/dhcpcd.conf interface eth0 static ip_address=10.10.10.10/24 static routers=10.10.10.1 static domain_name_servers=10.10.10.1 put discard (for fstrim) in fstab /dev/mmcblk0p2 / ext4 discard,defaults,noatime 0 1 reboot NO systemd: put this in /etc/inittab (see example in systemfiles/inittab) # pidor P0:2345:respawn:/root/pidor/scripts/lockbutton.sh P1:2345:respawn:/root/pidor/scripts/beamerdetect.sh P2:2345:respawn:/root/pidor/scripts/ws4beamer_status.py P3:2345:respawn:/root/pidor/scripts/peoplecounter-realtime.sh P4:2345:respawn:/root/pidor/scripts/caststatus.py WITH systemd cd systemfiles/ cp -p systemd/system/* /etc/systemd/system/ systemctl enable lockbutton.service beamerdetect.service ws4beamer_status.service peoplecounter-realtime.service caststatus.service systemctl daemon-reload systemctl start lockbutton.service beamerdetect.service ws4beamer_status.service peoplecounter-realtime.service caststatus.service # get beamer status on port 5042 apt-get install python-flask put the beamer IP into beamerip.txt put the peoplecounter ip into peoplecounterip.txt put entry for doorbuzz in /etc/hosts ln lightcommander /usr/local/bin/ # this is quite important fill in the crontab * * * * * /root/pidor/scripts/dhcp2presency.sh * * * * * /root/pidor/scripts/upd_status.sh > /run/spacestatus.out 2>&1 #needs an apache for the lights commander apt-get install apache2 php5 cd ~/pidor/www && ./intallwebsite.sh service apache2 restart # download windos sound bytes to /root/win # e.g. here http://joshlalonde.deviantart.com/art/Windows-XP-Sounds-158309567 # mkdir /root/win cd /root/win If you have a chromecast, script to switch off if chromecast is iddle: cd ~/pidor git clone git@github.com:balloob/pychromecast.git cd pychromecast sudo apt-get install python-dev python-pip sudo pip install --upgrade pip sudo pip install -r requirements.txt