110 lines
2.9 KiB
Arduino
110 lines
2.9 KiB
Arduino
|
/* syndilights display with arduino and neopixel */
|
||
|
/* !!!!! this does NOT YET use the syndilights format !!!! */
|
||
|
/* Based on http://arduino.cc/en/pmwiki.php?n=Reference/EthernetUDPRead */
|
||
|
|
||
|
#include <SPI.h>
|
||
|
#include <Ethernet.h>
|
||
|
#include <EthernetUdp.h>
|
||
|
#include <EEPROM.h>
|
||
|
#include <Adafruit_NeoPixel.h> // https://learn.adafruit.com/adafruit-neopixel-uberguide/arduino-library
|
||
|
|
||
|
|
||
|
// Which pin on the Arduino is connected to the NeoPixels?
|
||
|
#define PIN 6
|
||
|
|
||
|
// How many NeoPixels are attached to the Arduino?
|
||
|
#define NUMPIXELS 25
|
||
|
Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);
|
||
|
|
||
|
uint16_t brightness = 10;
|
||
|
|
||
|
// the mac will be filled out by serial number, stored as ascii hex in the eeprom 6 first bytes
|
||
|
byte mac[] = { '2', 'S', 'L', 0, 0, 0 }; // 2(to) S-yn2-L-ights (2 because unicast + locally administered)
|
||
|
|
||
|
// IPAddress ip(10, 2, 113, 51); // not using ip, will use DHCP
|
||
|
|
||
|
unsigned int localPort = 8888; // local port to listen on
|
||
|
|
||
|
// An EthernetUDP instance to let us send and receive packets over UDP
|
||
|
EthernetUDP Udp;
|
||
|
|
||
|
char packetBuffer[UDP_TX_PACKET_MAX_SIZE]; //buffer to hold incoming packet,
|
||
|
byte tomac[4];
|
||
|
void setup() {
|
||
|
Serial.begin(9600);
|
||
|
|
||
|
// you need to store into the EEPROM in the first 6 bytes an ascii version of the serial number.
|
||
|
// read that in and use it for the mac
|
||
|
int j=0;
|
||
|
for(int i=0;i<7;i+=2) {
|
||
|
int v;
|
||
|
v=(int)(EEPROM.read(i)-'0');
|
||
|
if (v>9) {v-=7;} // adjust for A-F are 7 chars later in ascii table
|
||
|
tomac[j]=v<<4;
|
||
|
v=(int)(EEPROM.read(i+1)-'0');
|
||
|
if (v>9) {v-=7;} // adjust for A-F are 7 chars later in ascii table
|
||
|
tomac[j++]+=v;
|
||
|
}
|
||
|
mac[3]=tomac[0];
|
||
|
mac[4]=tomac[1];
|
||
|
mac[5]=tomac[2];
|
||
|
|
||
|
// start the Ethernet and UDP:
|
||
|
// Ethernet.begin(mac,ip);
|
||
|
Ethernet.begin(mac); // use DHCP. This eats 2732 of sketch size
|
||
|
Udp.begin(localPort);
|
||
|
Serial.println("---");
|
||
|
for (byte thisByte = 0; thisByte < 4; thisByte++) {
|
||
|
// print the value of each byte of the IP address:
|
||
|
Serial.print(Ethernet.localIP()[thisByte], DEC);
|
||
|
Serial.print(".");
|
||
|
}
|
||
|
Serial.println();
|
||
|
pixels.begin();
|
||
|
}
|
||
|
|
||
|
void loop() {
|
||
|
int packetSize = Udp.parsePacket();
|
||
|
if(packetSize)
|
||
|
{
|
||
|
drawCommand();
|
||
|
}
|
||
|
}
|
||
|
|
||
|
uint16_t readSubPixelValue(byte in){
|
||
|
char s[2];
|
||
|
pinMode(13, OUTPUT);
|
||
|
|
||
|
s[0] = (char)in;
|
||
|
//if (s[0] == -1) s[0]='0';
|
||
|
|
||
|
s[1] = 0;
|
||
|
uint16_t r = (uint16_t)strtoul(s,NULL,16);
|
||
|
return r;
|
||
|
}
|
||
|
|
||
|
|
||
|
void drawCommand() {
|
||
|
Udp.read(packetBuffer,UDP_TX_PACKET_MAX_SIZE);
|
||
|
for(uint16_t i = 0; i<NUMPIXELS; i++){
|
||
|
byte r=(byte)packetBuffer[i*3];
|
||
|
byte g=(byte)packetBuffer[i*3+1];
|
||
|
byte b=(byte)packetBuffer[i*3+2];
|
||
|
pixels.setPixelColor(indirect(i), pixels.Color(readSubPixelValue(r), readSubPixelValue(g), readSubPixelValue(b)));
|
||
|
}
|
||
|
pixels.show();
|
||
|
}
|
||
|
|
||
|
#define ROWS 5
|
||
|
uint16_t indirect(uint16_t in) {
|
||
|
if((in/ROWS)%2) {
|
||
|
uint16_t t;
|
||
|
t=in/ROWS;
|
||
|
t*=ROWS;
|
||
|
t+=ROWS-(in%ROWS)-1;
|
||
|
return t;
|
||
|
} else {
|
||
|
return in;
|
||
|
}
|
||
|
}
|