- Fixed /usr/bon

- Added /usr/bin/env python3 to emphasize the use of py3
- Added more documentation and install instructions

v2/backend/forwarding/receiver.py

@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
 
 import socketserver
 import redis

v2/png_creator.py

@@ -1,4 +1,4 @@
-#!/usr/bon/env python
+#!/usr/bin/env python3
 
 from PIL import Image
 

v2/png_merger.py

@@ -1,4 +1,4 @@
-#!/usr/bon/env python
+#!/usr/bin/env python3
 
 from PIL import Image
 

v2/readme.md

@@ -1,3 +1,11 @@
+syndilights v2
+==============
+
+This is a Python3 implementation for the syndilights project.
+Nb: The Processing Python code is Python2
+
+This readme assumes you are in the 'v2' directory.
+
 Installation
 ============
 
@@ -5,23 +13,109 @@ Installation
     pip install -r requirements.txt
 ```
 
-Usage
-=====
+Base Setup
+==========
+
+Make sure redis-server is running. If it is you should be able to connect to port 6379
+
+```
+$ telnet localhost 6379
+Trying 127.0.0.1...
+Connected to localhost.
+Escape character is '^]'
+```
+
+If not this might happen and you have to launch redis-server:
+
+```
+$ telnet localhost 6379
+Trying 127.0.0.1...
+
+telnet: connect to address 127.0.0.1: Connection refused
+telnet: Unable to connect to remote host
+$ redis-server
+[74407] 22 Mar 11:47:33.713 # Warning: no config file specified, using the default config. In order to specify a config file use redis-server /path/to/redis.conf
+[74407] 22 Mar 11:47:33.714 * Increased maximum number of open files to 10032 (it was originally set to 2560).
+                _._
+           _.-``__ ''-._
+      _.-``    `.  `_.  ''-._           Redis 2.8.19 (00000000/0) 64 bit
+  .-`` .-```.  ```\/    _.,_ ''-._
+ (    '      ,       .-`  | `,    )     Running in stand alone mode
+ |`-._`-...-` __...-.``-._|'` _.-'|     Port: 6379
+ |    `-._   `._    /     _.-'    |     PID: 74407
+  `-._    `-._  `-./  _.-'    _.-'
+ |`-._`-._    `-.__.-'    _.-'_.-'|
+ |    `-._`-._        _.-'_.-'    |           http://redis.io
+  `-._    `-._`-.__.-'_.-'    _.-'
+ |`-._`-._    `-.__.-'    _.-'_.-'|
+ |    `-._`-._        _.-'_.-'    |
+  `-._    `-._`-.__.-'_.-'    _.-'
+      `-._    `-.__.-'    _.-'
+          `-._        _.-'
+              `-.__.-'
+
+[74407] 22 Mar 11:47:33.715 # Server started, Redis version 2.8.19
+[74407] 22 Mar 11:47:33.715 * The server is now ready to accept connections on port 6379
+```
 
 Run the listener receiving the images from the clients:
 
 ```
-    python receiver.py
+    python3 backend/forwarding/receiver.py
 ```
 
+Run the forwarder that talks to the teensy via Serial and make sure to adapt the 'serialConfigure' option in the file:
+
+```
+    python3 backend/forwarding/forward.py
+```
+
+
+Processing
+==========
+
+To use syndilights with processing you need to push the following code onto the Teensy 3.1:
+
+```
+    backend/arduino/VideoDisplayTeensy31/VideoDisplayTeensy31.ino
+```
+
+/!\ When running the teensdyduino installer over your Arduino (tested on 1.0.6) installation make sure NO libraries are selected (yes, NOT even the WS2811) /!\
+
+Open processing and add a new Mode. This can be achieved by clicking on 'Java' -> Add Mode…
+In the mode manager select Python and install
+
+/!\ Restart processing /!\
+
+Next step will be to open the following file in processing:
+
+```
+    backend/processing/PixelControl_TCP/PixelControl_TCP.pyde
+```
+
+Configure the height and width of your Pixel Setup
+A frame rate of 30 is good enough for most uses
+For test purposes the brightness has been set to low
+
+The current demo is a green dot that will chase around the LED-strip.
+
+Setting long_line to True or False will change the wrapping mode
+<insert picture or ASCII Art here>
+
+
+Sending images to the grid
+==========================
+
+<section needs revision>
+
 Run the script merging the images:
 
 ```
-    python png_merger.py
+    python3 png_merger.py
 ```
 
 Run the scripts sending the images:
 
 ```
-    python png_creator.py
+    python3 png_creator.py
 ```