mirror of https://github.com/MISP/MISP
29 KiB
29 KiB
INSTALLATION INSTRUCTIONS for RHEL 7.x and CentOS 7.x
-1/ Installer and Manual install instructions
Make sure you are reading the parsed version of this Document. When in doubt click here.
!!! warning In the future, to install MISP on a fresh RHEL 7 install all you need to do is:
```bash
# Please check the installer options first to make the best choice for your install
wget -O /tmp/INSTALL.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh
bash /tmp/INSTALL.sh
# This will install MISP Core
wget -O /tmp/INSTALL.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh
bash /tmp/INSTALL.sh -c
```
**The above does NOT work yet**
0/ Overview and Assumptions
{!generic/rhelVScentos.md!}
!!! warning The core MISP team cannot verify if this guide is working or not. Please help us in keeping it up to date and accurate. Thus we also have difficulties in supporting RHEL issues but will do a best effort on a similar yet slightly different setup.
!!! notice Maintenance for CentOS 7 will end on: June 30th, 2024 Source[0] Source[1] CentOS 7-1908 NetInstallURL
This document details the steps to install MISP on Red Hat Enterprise Linux 7.x (RHEL 7.x) and CentOS 7.x. At time of this writing it was tested on versions 7.6 for both. This is a joint RHEL/CentOS install guide. The authors tried to make it contextually evident what applies to which flavor.
The following assumptions with regard to this installation have been made.
- A valid support agreement allowing the system to register to the Red Hat Customer Portal and receive updates
- The ability to enable additional RPM repositories, specifically the EPEL and Software Collections (SCL) repos
- This system will have direct or proxy access to the Internet for updates. Or connected to a Red Hat Satellite Server
- This document will bootstrap a MISP instance running over HTTPS. A full test of all features have yet to be done. The following GitHub issue details some shortcomings.
{!generic/globalVariables.md!}
!!! note
For fresh installs the following tips might be handy.
Allow ssh to pass the firewall on the CLI
bash firewall-cmd --zone=public --add-port=22/tcp --permanent firewall-cmd --reload
To quickly make sure if NetworkManager handles your network interface on boot, check in the following location:
/etc/sysconfig/network-scripts/ifcfg-*
1/ OS Install and additional repositories
1.1/ Complete a minimal RHEL/CentOS installation, configure IP address to connect automatically.
1.2/ Configure system hostname (if not done during install)
sudo hostnamectl set-hostname misp.local # Your choice, in a production environment, it's best to use a FQDN
1.3/ [RHEL] Register the system for updates with Red Hat Subscription Manager
# <snippet-begin 0_RHEL_register.sh>
sudo subscription-manager register --auto-attach # register your system to an account and attach to a current subscription
# <snippet-end 0_RHEL_register.sh>
1.4/ [RHEL] Enable the optional, extras and Software Collections (SCL) repos
# <snippet-begin 0_RHEL_SCL.sh>
enableReposRHEL () {
sudo subscription-manager refresh
sudo subscription-manager repos --enable rhel-7-server-optional-rpms
sudo subscription-manager repos --enable rhel-7-server-extras-rpms
sudo subscription-manager repos --enable rhel-server-rhscl-7-rpms
}
# <snippet-end 0_RHEL_SCL.sh>
1.4c/ [CentOS] Enable EPEL for additional dependencies
# <snippet-begin 0_CentOS_EPEL.sh>
centosEPEL () {
# We need some packages from the Extra Packages for Enterprise Linux repository
sudo yum install epel-release -y
# Since MISP 2.4 PHP 5.5 is a minimal requirement, so we need a newer version than CentOS base provides
# Software Collections is a way do to this, see https://wiki.centos.org/AdditionalResources/Repositories/SCL
sudo yum install centos-release-scl -y
}
# <snippet-end 0_CentOS_EPEL.sh>
1.5a/ Install the deltarpm package to help reduce download size when installing updates (optional)
sudo yum install deltarpm -y
1.5.b/ Install vim (optional)
# Because (neo)vim is just so practical
sudo yum install neovim -y
1.5.c/ Install ntpdate (optional)
# In case you time is wrong, this will fix it.
sudo yum install ntpdate -y
sudo ntpdate pool.ntp.org
1.5/ Update the system and reboot
# <snippet-begin 0_yum-update.sh>
yumUpdate () {
sudo yum update -y
}
# <snippet-end 0_yum-update.sh>
1.6/ [RHEL] Install the EPEL repo
# <snippet-begin 0_RHEL_EPEL.sh>
enableEPEL () {
sudo yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm -y
}
# <snippet-end 0_RHEL_EPEL.sh>
2/ Dependencies
!!! note This guide installs PHP 7.2 from SCL
!!! warning PHP 5.6 and 7.0 aren't supported since December 2018. Please update accordingly. In the future only PHP7 will be supported.
2.01/ Install some base system dependencies
# <snippet-begin 0_yumInstallCoreDeps.sh>
yumInstallCoreDeps () {
# Install the dependencies:
sudo yum install gcc git zip rh-git218 \
httpd24 \
mod_ssl \
rh-redis32 \
rh-mariadb102 \
libxslt-devel zlib-devel ssdeep-devel -y
# Enable and start redis
sudo systemctl enable --now rh-redis32-redis.service
RUN_PHP="/usr/bin/scl enable rh-php72"
PHP_INI="/etc/opt/rh/rh-php72/php.ini"
# Install PHP 7.2 from SCL, see https://www.softwarecollections.org/en/scls/rhscl/rh-php72/
sudo yum install rh-php72 rh-php72-php-fpm rh-php72-php-devel \
rh-php72-php-mysqlnd \
rh-php72-php-mbstring \
rh-php72-php-xml \
rh-php72-php-bcmath \
rh-php72-php-opcache \
rh-php72-php-gd -y
# Install Python 3.6 from SCL, see
# https://www.softwarecollections.org/en/scls/rhscl/rh-python36/
RUN_PYTHON='/usr/bin/scl enable rh-python36'
sudo yum install rh-python36 -y
sudo systemctl enable --now rh-php72-php-fpm.service
}
# <snippet-end 0_yumInstallCoreDeps.sh>
!!! notice $RUN_PHP makes php available for you if using rh-php72. e.g: sudo $RUN_PHP "pear list | grep Crypt_GPG"
# <snippet-begin 0_yumInstallHaveged.sh>
# GPG needs lots of entropy, haveged provides entropy
# /!\ Only do this if you're not running rngd to provide randomness and your kernel randomness is not sufficient.
sudo yum install haveged -y
sudo systemctl enable --now haveged.service
# <snippet-end 0_yumInstallHaveged.sh>
3/ MISP code
3.01/ Download MISP code using git in /var/www/ directory
# <snippet-begin 1_mispCoreInstall_RHEL.sh>
installCoreRHEL () {
# Download MISP using git in the /var/www/ directory.
sudo mkdir $PATH_TO_MISP
sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP
cd /var/www
$SUDO_WWW git clone https://github.com/MISP/MISP.git
cd $PATH_TO_MISP
##$SUDO_WWW git checkout tags/$(git describe --tags `git rev-list --tags --max-count=1`)
# if the last shortcut doesn't work, specify the latest version manually
# example: git checkout tags/v2.4.XY
# the message regarding a "detached HEAD state" is expected behaviour
# (you only have to create a new branch, if you want to change stuff and do a pull request for example)
# Fetch submodules
$SUDO_WWW git submodule update --init --recursive
# Make git ignore filesystem permission differences for submodules
$SUDO_WWW git submodule foreach --recursive git config core.filemode false
# Make git ignore filesystem permission differences
$SUDO_WWW git config core.filemode false
# Create a python3 virtualenv
$SUDO_WWW $RUN_PYTHON -- virtualenv -p python3 $PATH_TO_MISP/venv
sudo mkdir /usr/share/httpd/.cache
sudo chown $WWW_USER:$WWW_USER /usr/share/httpd/.cache
$SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U pip setuptools
cd $PATH_TO_MISP/app/files/scripts
$SUDO_WWW git clone https://github.com/CybOXProject/python-cybox.git
$SUDO_WWW git clone https://github.com/STIXProject/python-stix.git
$SUDO_WWW git clone --branch master --single-branch https://github.com/lief-project/LIEF.git lief
$SUDO_WWW git clone https://github.com/CybOXProject/mixbox.git
cd $PATH_TO_MISP/app/files/scripts/python-cybox
# If you umask is has been changed from the default, it is a good idea to reset it to 0022 before installing python modules
UMASK=$(umask)
umask 0022
cd $PATH_TO_MISP/app/files/scripts/python-stix
$SUDO_WWW $PATH_TO_MISP/venv/bin/pip install .
# install mixbox to accommodate the new STIX dependencies:
cd $PATH_TO_MISP/app/files/scripts/mixbox
$SUDO_WWW $PATH_TO_MISP/venv/bin/pip install .
# install STIX2.0 library to support STIX 2.0 export:
cd $PATH_TO_MISP/cti-python-stix2
$SUDO_WWW $PATH_TO_MISP/venv/bin/pip install .
# install maec
$SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U maec
# install zmq
$SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U zmq
# install redis
$SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U redis
# lief needs manual compilation
sudo yum install devtoolset-7 cmake3 cppcheck -y
# FIXME: This does not work!
cd $PATH_TO_MISP/app/files/scripts/lief
$SUDO_WWW mkdir build
cd build
$SUDO_WWW scl enable devtoolset-7 rh-python36 "bash -c 'cmake3 \
-DLIEF_PYTHON_API=on \
-DPYTHON_VERSION=3.6 \
-DPYTHON_EXECUTABLE=$PATH_TO_MISP/venv/bin/python \
-DLIEF_DOC=off \
-DCMAKE_BUILD_TYPE=Release \
..'"
$SUDO_WWW make -j3 pyLIEF
if [ $? == 2 ]; then
# In case you get "internal compiler error: Killed (program cc1plus)"
# You ran out of memory.
# Create some swap
sudo dd if=/dev/zero of=/var/swap.img bs=1024k count=4000
sudo mkswap /var/swap.img
sudo swapon /var/swap.img
# And compile again
$SUDO_WWW make -j3 pyLIEF
sudo swapoff /var/swap.img
sudo rm /var/swap.img
fi
# The following adds a PYTHONPATH to where the pyLIEF module has been compiled
echo /var/www/MISP/app/files/scripts/lief/build/api/python |$SUDO_WWW tee /var/www/MISP/venv/lib/python3.6/site-packages/lief.pth
# install magic, pydeep
$SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U python-magic git+https://github.com/kbandla/pydeep.git plyara
# install PyMISP
cd $PATH_TO_MISP/PyMISP
$SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U .
# Enable python3 for php-fpm
echo 'source scl_source enable rh-python36' | sudo tee -a /etc/opt/rh/rh-php72/sysconfig/php-fpm
sudo sed -i.org -e 's/^;\(clear_env = no\)/\1/' /etc/opt/rh/rh-php72/php-fpm.d/www.conf
sudo systemctl restart rh-php72-php-fpm.service
umask $UMASK
# Enable dependencies detection in the diagnostics page
# This allows MISP to detect GnuPG, the Python modules' versions and to read the PHP settings.
# The LD_LIBRARY_PATH setting is needed for rh-git218 to work, one might think to install httpd24 and not just httpd ...
echo "env[PATH] = /opt/rh/rh-git218/root/usr/bin:/opt/rh/rh-redis32/root/usr/bin:/opt/rh/rh-python36/root/usr/bin:/opt/rh/rh-php72/root/usr/bin:/usr/local/bin:/usr/bin:/bin" |sudo tee -a /etc/opt/rh/rh-php72/php-fpm.d/www.conf
echo "env[LD_LIBRARY_PATH] = /opt/rh/httpd24/root/usr/lib64/" |sudo tee -a /etc/opt/rh/rh-php72/php-fpm.d/www.conf
sudo systemctl restart rh-php72-php-fpm.service
}
# <snippet-end 1_mispCoreInstall_RHEL.sh>
4/ CakePHP
4.01/ Install CakeResque along with its dependencies if you intend to use the built in background jobs
!!! notice CakePHP is now included as a submodule of MISP and has been fetch by a previous step.
# <snippet-begin 1_installCake_RHEL.sh>
installCake_RHEL ()
{
sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP
sudo mkdir /usr/share/httpd/.composer
sudo chown $WWW_USER:$WWW_USER /usr/share/httpd/.composer
cd $PATH_TO_MISP/app
# Update composer.phar (optional)
#$SUDO_WWW $RUN_PHP -- php -r "copy('https://getcomposer.org/installer', 'composer-setup.php');"
#$SUDO_WWW $RUN_PHP -- php -r "if (hash_file('SHA384', 'composer-setup.php') === '48e3236262b34d30969dca3c37281b3b4bbe3221bda826ac6a9a62d6444cdb0dcd0615698a5cbe587c3f0fe57a54d8f5') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('composer-setup.php'); } echo PHP_EOL;"
#$SUDO_WWW $RUN_PHP "php composer-setup.php"
#$SUDO_WWW $RUN_PHP -- php -r "unlink('composer-setup.php');"
$SUDO_WWW $RUN_PHP "php composer.phar install"
## sudo yum install php-redis -y
sudo scl enable rh-php72 'pecl channel-update pecl.php.net'
sudo scl enable rh-php72 'yes no|pecl install redis'
echo "extension=redis.so" |sudo tee /etc/opt/rh/rh-php72/php-fpm.d/redis.ini
sudo ln -s /etc/opt/rh/rh-php72/php-fpm.d/redis.ini /etc/opt/rh/rh-php72/php.d/99-redis.ini
# Install gnupg extension
sudo yum install gpgme-devel -y
sudo scl enable rh-php72 'pecl install gnupg'
echo "extension=gnupg.so" |sudo tee /etc/opt/rh/rh-php72/php-fpm.d/gnupg.ini
sudo ln -s /etc/opt/rh/rh-php72/php-fpm.d/gnupg.ini /etc/opt/rh/rh-php72/php.d/99-gnupg.ini
sudo systemctl restart rh-php72-php-fpm.service
# If you have not yet set a timezone in php.ini
echo 'date.timezone = "Asia/Tokyo"' |sudo tee /etc/opt/rh/rh-php72/php-fpm.d/timezone.ini
sudo ln -s ../php-fpm.d/timezone.ini /etc/opt/rh/rh-php72/php.d/99-timezone.ini
# Recommended: Change some PHP settings in /etc/opt/rh/rh-php72/php.ini
# max_execution_time = 300
# memory_limit = 2048M
# upload_max_filesize = 50M
# post_max_size = 50M
for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
do
sudo sed -i "s/^\($key\).*/\1 = $(eval echo \${$key})/" $PHP_INI
done
sudo systemctl restart rh-php72-php-fpm.service
# To use the scheduler worker for scheduled tasks, do the following:
sudo cp -fa $PATH_TO_MISP/INSTALL/setup/config.php $PATH_TO_MISP/app/Plugin/CakeResque/Config/config.php
}
# <snippet-begin 1_installCake_RHEL.sh>
5/ Set file permissions
# <snippet-begin 2_permissions_RHEL.sh>
# Main function to fix permissions to something sane
permissions_RHEL () {
sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP
## ? chown -R root:apache /var/www/MISP
sudo find $PATH_TO_MISP -type d -exec chmod g=rx {} \;
sudo chmod -R g+r,o= $PATH_TO_MISP
## **Note :** For updates through the web interface to work, apache must own the /var/www/MISP folder and its subfolders as shown above, which can lead to security issues. If you do not require updates through the web interface to work, you can use the following more restrictive permissions :
sudo chmod -R 750 $PATH_TO_MISP
sudo chmod -R g+xws $PATH_TO_MISP/app/tmp
sudo chmod -R g+ws $PATH_TO_MISP/app/files
sudo chmod -R g+ws $PATH_TO_MISP/app/files/scripts/tmp
sudo chmod -R g+rw $PATH_TO_MISP/venv
sudo chmod -R g+rw $PATH_TO_MISP/.git
sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/files
sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/files/terms
sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/files/scripts/tmp
sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/Plugin/CakeResque/tmp
sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/app/Config
sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/app/tmp
sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/app/webroot/img/orgs
sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/app/webroot/img/custom
}
# <snippet-end 2_permissions_RHEL.sh>
6/ Create database and user
6.01/ Set database to listen on localhost only
# <snippet-begin 1_prepareDB_RHEL.sh>
prepareDB_RHEL () {
RUN_MYSQL="/usr/bin/scl enable rh-mariadb102"
# Enable, start and secure your mysql database server
sudo systemctl enable --now rh-mariadb102-mariadb.service
echo [mysqld] |sudo tee /etc/opt/rh/rh-mariadb102/my.cnf.d/bind-address.cnf
echo bind-address=127.0.0.1 |sudo tee -a /etc/opt/rh/rh-mariadb102/my.cnf.d/bind-address.cnf
sudo systemctl restart rh-mariadb102-mariadb
sudo yum install expect -y
## The following needs some thoughts about scl enable foo
#if [[ ! -e /var/opt/rh/rh-mariadb102/lib/mysql/misp/users.ibd ]]; then
# Add your credentials if needed, if sudo has NOPASS, comment out the relevant lines
pw="Password1234"
expect -f - <<-EOF
set timeout 10
spawn sudo scl enable rh-mariadb102 mysql_secure_installation
expect "*?assword*"
send -- "$pw\r"
expect "Enter current password for root (enter for none):"
send -- "\r"
expect "Set root password?"
send -- "y\r"
expect "New password:"
send -- "${DBPASSWORD_ADMIN}\r"
expect "Re-enter new password:"
send -- "${DBPASSWORD_ADMIN}\r"
expect "Remove anonymous users?"
send -- "y\r"
expect "Disallow root login remotely?"
send -- "y\r"
expect "Remove test database and access to it?"
send -- "y\r"
expect "Reload privilege tables now?"
send -- "y\r"
expect eof
EOF
sudo yum remove tcl expect -y
sudo systemctl restart rh-mariadb102-mariadb
scl enable rh-mariadb102 "mysql -u $DBUSER_ADMIN -p$DBPASSWORD_ADMIN -e 'CREATE DATABASE $DBNAME;'"
scl enable rh-mariadb102 "mysql -u $DBUSER_ADMIN -p$DBPASSWORD_ADMIN -e \"GRANT USAGE on *.* to $DBUSER_MISP@localhost IDENTIFIED by '$DBPASSWORD_MISP';\""
scl enable rh-mariadb102 "mysql -u $DBUSER_ADMIN -p$DBPASSWORD_ADMIN -e \"GRANT ALL PRIVILEGES on $DBNAME.* to '$DBUSER_MISP'@'localhost';\""
scl enable rh-mariadb102 "mysql -u $DBUSER_ADMIN -p$DBPASSWORD_ADMIN -e 'FLUSH PRIVILEGES;'"
$SUDO_WWW cat $PATH_TO_MISP/INSTALL/MYSQL.sql | sudo scl enable rh-mariadb102 "mysql -u $DBUSER_MISP -p$DBPASSWORD_MISP $DBNAME"
}
# <snippet-end 1_prepareDB_RHEL.sh>
7/ Apache Configuration
!!! notice
SELinux note, to check if it is running:
bash $ sestatus SELinux status: disabled
If it is disabled, you can ignore the chcon/setsebool/semanage/checkmodule/semodule* commands.
# <snippet-begin 1_apacheConfig_RHEL.sh>
apacheConfig_RHEL () {
# Now configure your apache server with the DocumentRoot $PATH_TO_MISP/app/webroot/
# A sample vhost can be found in $PATH_TO_MISP/INSTALL/apache.misp.centos7
sudo cp $PATH_TO_MISP/INSTALL/apache.misp.centos7.ssl /etc/httpd/conf.d/misp.ssl.conf
#sudo sed -i "s/SetHandler/\#SetHandler/g" /etc/httpd/conf.d/misp.ssl.conf
sudo rm /etc/httpd/conf.d/ssl.conf
sudo chmod 644 /etc/httpd/conf.d/misp.ssl.conf
sudo sed -i '/Listen 80/a Listen 443' /etc/httpd/conf/httpd.conf
# If a valid SSL certificate is not already created for the server, create a self-signed certificate:
echo "The Common Name used below will be: ${OPENSSL_CN}"
# This will take a rather long time, be ready. (13min on a VM, 8GB Ram, 1 core)
if [[ ! -e "/etc/pki/tls/certs/dhparam.pem" ]]; then
sudo openssl dhparam -out /etc/pki/tls/certs/dhparam.pem 4096
fi
sudo openssl genrsa -des3 -passout pass:xxxx -out /tmp/misp.local.key 4096
sudo openssl rsa -passin pass:xxxx -in /tmp/misp.local.key -out /etc/pki/tls/private/misp.local.key
sudo rm /tmp/misp.local.key
sudo openssl req -new -subj "/C=${OPENSSL_C}/ST=${OPENSSL_ST}/L=${OPENSSL_L}/O=${OPENSSL_O}/OU=${OPENSSL_OU}/CN=${OPENSSL_CN}/emailAddress=${OPENSSL_EMAILADDRESS}" -key /etc/pki/tls/private/misp.local.key -out /etc/pki/tls/certs/misp.local.csr
sudo openssl x509 -req -days 365 -in /etc/pki/tls/certs/misp.local.csr -signkey /etc/pki/tls/private/misp.local.key -out /etc/pki/tls/certs/misp.local.crt
sudo ln -s /etc/pki/tls/certs/misp.local.csr /etc/pki/tls/certs/misp-chain.crt
cat /etc/pki/tls/certs/dhparam.pem |sudo tee -a /etc/pki/tls/certs/misp.local.crt
sudo systemctl restart httpd.service
# Since SELinux is enabled, we need to allow httpd to write to certain directories
sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP/app/files
sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP/app/files/terms
sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP/app/files/scripts/tmp
sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP/app/Plugin/CakeResque/tmp
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP/app/Console/cake
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP/app/Console/worker/start.sh
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP/app/files/scripts/mispzmq/mispzmq.py
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP/app/files/scripts/mispzmq/mispzmqtest.py
sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP/app/files/scripts/lief/build/api/python/lief.so
sudo chcon -t httpd_sys_rw_content_t /tmp
sudo chcon -R -t usr_t $PATH_TO_MISP/venv
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/.git
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/tmp
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/Lib
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/Config
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/webroot/img/orgs
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/webroot/img/custom
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/files/scripts/mispzmq
}
# <snippet-end 1_apacheConfig_RHEL.sh>
!!! warning Todo: Revise all permissions so update in Web UI works.
# <snippet-begin 1_firewall_RHEL.sh>
firewall_RHEL () {
# Allow httpd to connect to the redis server and php-fpm over tcp/ip
sudo setsebool -P httpd_can_network_connect on
# Allow httpd to send emails from php
sudo setsebool -P httpd_can_sendmail on
# Enable and start the httpd service
sudo systemctl enable --now httpd.service
# Open a hole in the iptables firewall
sudo firewall-cmd --zone=public --add-port=80/tcp --permanent
sudo firewall-cmd --zone=public --add-port=443/tcp --permanent
sudo firewall-cmd --reload
}
# <snippet-end 1_firewall_RHEL.sh>
8/ Log Rotation
8.01/ Enable log rotation
MISP saves the stdout and stderr of its workers in /var/www/MISP/app/tmp/logs To rotate these logs install the supplied logrotate script:
FIXME: The below does not work
# <snippet-begin 2_logRotation_RHEL.sh>
logRotation_RHEL () {
# MISP saves the stdout and stderr of its workers in $PATH_TO_MISP/app/tmp/logs
# To rotate these logs install the supplied logrotate script:
sudo cp $PATH_TO_MISP/INSTALL/misp.logrotate /etc/logrotate.d/misp
sudo chmod 0640 /etc/logrotate.d/misp
# Now make logrotate work under SELinux as well
# Allow logrotate to modify the log files
sudo semanage fcontext -a -t httpd_sys_rw_content_t "/var/www/MISP(/.*)?"
sudo semanage fcontext -a -t httpd_log_t "$PATH_TO_MISP/app/tmp/logs(/.*)?"
sudo chcon -R -t httpd_log_t $PATH_TO_MISP/app/tmp/logs
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/tmp/logs
# Impact of the following: ?!?!?!!?111
##sudo restorecon -R /var/www/MISP/
# Allow logrotate to read /var/www
sudo checkmodule -M -m -o /tmp/misplogrotate.mod $PATH_TO_MISP/INSTALL/misplogrotate.te
sudo semodule_package -o /tmp/misplogrotate.pp -m /tmp/misplogrotate.mod
sudo semodule -i /tmp/misplogrotate.pp
}
# <snippet-end 2_logRotation_RHEL.sh>
9/ MISP Configuration
# <snippet-begin 2_configMISP_RHEL.sh>
configMISP_RHEL () {
# There are 4 sample configuration files in $PATH_TO_MISP/app/Config that need to be copied
$SUDO_WWW cp -a $PATH_TO_MISP/app/Config/bootstrap.default.php $PATH_TO_MISP/app/Config/bootstrap.php
$SUDO_WWW cp -a $PATH_TO_MISP/app/Config/database.default.php $PATH_TO_MISP/app/Config/database.php
$SUDO_WWW cp -a $PATH_TO_MISP/app/Config/core.default.php $PATH_TO_MISP/app/Config/core.php
$SUDO_WWW cp -a $PATH_TO_MISP/app/Config/config.default.php $PATH_TO_MISP/app/Config/config.php
echo "<?php
class DATABASE_CONFIG {
public \$default = array(
'datasource' => 'Database/Mysql',
//'datasource' => 'Database/Postgres',
'persistent' => false,
'host' => '$DBHOST',
'login' => '$DBUSER_MISP',
'port' => 3306, // MySQL & MariaDB
//'port' => 5432, // PostgreSQL
'password' => '$DBPASSWORD_MISP',
'database' => '$DBNAME',
'prefix' => '',
'encoding' => 'utf8',
);
}" | $SUDO_WWW tee $PATH_TO_MISP/app/Config/database.php
# Configure the fields in the newly created files:
# config.php : baseurl (example: 'baseurl' => 'http://misp',) - don't use "localhost" it causes issues when browsing externally
# core.php : Uncomment and set the timezone: `// date_default_timezone_set('UTC');`
# database.php : login, port, password, database
# DATABASE_CONFIG has to be filled
# With the default values provided in section 6, this would look like:
# class DATABASE_CONFIG {
# public $default = array(
# 'datasource' => 'Database/Mysql',
# 'persistent' => false,
# 'host' => 'localhost',
# 'login' => 'misp', // grant usage on *.* to misp@localhost
# 'port' => 3306,
# 'password' => 'XXXXdbpasswordhereXXXXX', // identified by 'XXXXdbpasswordhereXXXXX';
# 'database' => 'misp', // create database misp;
# 'prefix' => '',
# 'encoding' => 'utf8',
# );
#}
# Important! Change the salt key in $PATH_TO_MISP/app/Config/config.php
# The admin user account will be generated on the first login, make sure that the salt is changed before you create that user
# If you forget to do this step, and you are still dealing with a fresh installation, just alter the salt,
# delete the user from mysql and log in again using the default admin credentials (admin@admin.test / admin)
# If you want to be able to change configuration parameters from the webinterface:
sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/Config/config.php
sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP/app/Config/config.php
# Generate a GPG encryption key.
cat >/tmp/gen-key-script <<EOF
%echo Generating a default key
Key-Type: default
Key-Length: $GPG_KEY_LENGTH
Subkey-Type: default
Name-Real: $GPG_REAL_NAME
Name-Comment: $GPG_COMMENT
Name-Email: $GPG_EMAIL_ADDRESS
Expire-Date: 0
Passphrase: $GPG_PASSPHRASE
# Do a commit here, so that we can later print "done"
%commit
%echo done
EOF
sudo gpg --homedir $PATH_TO_MISP/.gnupg --batch --gen-key /tmp/gen-key-script
sudo rm -f /tmp/gen-key-script
sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/.gnupg
sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/.gnupg
# And export the public key to the webroot
sudo gpg --homedir $PATH_TO_MISP/.gnupg --export --armor $GPG_EMAIL_ADDRESS |sudo tee $PATH_TO_MISP/app/webroot/gpg.asc
sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/webroot/gpg.asc
echo "Admin (root) DB Password: $DBPASSWORD_ADMIN"
echo "User (misp) DB Password: $DBPASSWORD_MISP"
}
# <snippet-end 2_configMISP_RHEL.sh>
!!! note
There is a bug that if a passphrase is added MISP will produce an error on the diagnostic page.
/!\ THIS WANTS TO BE VERIFIED AND LINKED WITH A CORRESPONDING ISSUE.
!!! note The email address should match the one set in the config.php configuration file Make sure that you use the same settings in the MISP Server Settings tool
9.06/ Use MISP background workers
# <snippet-begin 3_configWorkers_RHEL.sh>
configWorkersRHEL () {
echo "[Unit]
Description=MISP background workers
After=rh-mariadb102-mariadb.service rh-redis32-redis.service rh-php72-php-fpm.service
[Service]
Type=forking
User=apache
Group=apache
ExecStart=/usr/bin/scl enable rh-php72 rh-redis32 rh-mariadb102 /var/www/MISP/app/Console/worker/start.sh
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target" |sudo tee /etc/systemd/system/misp-workers.service
sudo chmod +x /var/www/MISP/app/Console/worker/start.sh
sudo systemctl daemon-reload
sudo systemctl enable --now misp-workers.service
}
# <snippet-end 3_configWorkers_RHEL.sh>
{!generic/misp-modules-centos.md!}
{!generic/MISP_CAKE_init.md!}
{!generic/misp-dashboard-centos.md!}
{!generic/INSTALL.done.md!}
{!generic/recommended.actions.md!}
11/ LIEF Installation
lief is required for the Advanced Attachment Handler and requires manual compilation
The installation is explained in section 3.01
12/ Known Issues
12.01/ Workers cannot be started or restarted from the web page
Possible also due to package being installed via SCL, attempting to start workers through the web page will result in error. Worker's can be restarted via the CLI using the following command.
systemctl restart misp-workers.service
!!! note
No other functions were tested after the conclusion of this install. There may be issue that aren't addressed
via this guide and will need additional investigation.
{!generic/hardening.md!}