17 KiB
How to monitor Synapse metrics using Prometheus
-
Install Prometheus:
Follow instructions at http://prometheus.io/docs/introduction/install/
-
Enable Synapse metrics:
In
homeserver.yaml
, make sureenable_metrics
is set toTrue
. -
Enable the
/_synapse/metrics
Synapse endpoint that Prometheus uses to collect data:There are two methods of enabling the metrics endpoint in Synapse.
The first serves the metrics as a part of the usual web server and can be enabled by adding the "metrics" resource to the existing listener as such:
resources: - names: - client - metrics
This provides a simple way of adding metrics to your Synapse installation, and serves under
/_synapse/metrics
. If you do not wish your metrics be publicly exposed, you will need to either filter it out at your load balancer, or use the second method.The second method runs the metrics server on a different port, in a different thread to Synapse. This can make it more resilient to heavy load meaning metrics cannot be retrieved, and can be exposed to just internal networks easier. The served metrics are available over HTTP only, and will be available at
/_synapse/metrics
.Add a new listener to homeserver.yaml:
listeners: - type: metrics port: 9000 bind_addresses: - '0.0.0.0'
-
Restart Synapse.
-
Add a Prometheus target for Synapse.
It needs to set the
metrics_path
to a non-default value (underscrape_configs
):- job_name: "synapse" scrape_interval: 15s metrics_path: "/_synapse/metrics" static_configs: - targets: ["my.server.here:port"]
where
my.server.here
is the IP address of Synapse, andport
is the listener port configured with themetrics
resource.If your prometheus is older than 1.5.2, you will need to replace
static_configs
in the above withtarget_groups
. -
Restart Prometheus.
-
Consider using the grafana dashboard and required recording rules
Monitoring workers
To monitor a Synapse installation using workers, every worker needs to be monitored independently, in addition to the main homeserver process. This is because workers don't send their metrics to the main homeserver process, but expose them directly (if they are configured to do so).
To allow collecting metrics from a worker, you need to add a
metrics
listener to its configuration, by adding the following
under worker_listeners
:
- type: metrics
bind_address: ''
port: 9101
The bind_address
and port
parameters should be set so that
the resulting listener can be reached by prometheus, and they
don't clash with an existing worker.
With this example, the worker's metrics would then be available
on http://127.0.0.1:9101
.
Example Prometheus target for Synapse with workers:
- job_name: "synapse"
scrape_interval: 15s
metrics_path: "/_synapse/metrics"
static_configs:
- targets: ["my.server.here:port"]
labels:
instance: "my.server"
job: "master"
index: 1
- targets: ["my.workerserver.here:port"]
labels:
instance: "my.server"
job: "generic_worker"
index: 1
- targets: ["my.workerserver.here:port"]
labels:
instance: "my.server"
job: "generic_worker"
index: 2
- targets: ["my.workerserver.here:port"]
labels:
instance: "my.server"
job: "media_repository"
index: 1
Labels (instance
, job
, index
) can be defined as anything.
The labels are used to group graphs in grafana.
Renaming of metrics & deprecation of old names in 1.2
Synapse 1.2 updates the Prometheus metrics to match the naming
convention of the upstream prometheus_client
. The old names are
considered deprecated and will be removed in a future version of
Synapse.
New Name | Old Name |
---|---|
python_gc_objects_collected_total | python_gc_objects_collected |
python_gc_objects_uncollectable_total | python_gc_objects_uncollectable |
python_gc_collections_total | python_gc_collections |
process_cpu_seconds_total | process_cpu_seconds |
synapse_federation_client_sent_transactions_total | synapse_federation_client_sent_transactions |
synapse_federation_client_events_processed_total | synapse_federation_client_events_processed |
synapse_event_processing_loop_count_total | synapse_event_processing_loop_count |
synapse_event_processing_loop_room_count_total | synapse_event_processing_loop_room_count |
synapse_util_metrics_block_count_total | synapse_util_metrics_block_count |
synapse_util_metrics_block_time_seconds_total | synapse_util_metrics_block_time_seconds |
synapse_util_metrics_block_ru_utime_seconds_total | synapse_util_metrics_block_ru_utime_seconds |
synapse_util_metrics_block_ru_stime_seconds_total | synapse_util_metrics_block_ru_stime_seconds |
synapse_util_metrics_block_db_txn_count_total | synapse_util_metrics_block_db_txn_count |
synapse_util_metrics_block_db_txn_duration_seconds_total | synapse_util_metrics_block_db_txn_duration_seconds |
synapse_util_metrics_block_db_sched_duration_seconds_total | synapse_util_metrics_block_db_sched_duration_seconds |
synapse_background_process_start_count_total | synapse_background_process_start_count |
synapse_background_process_ru_utime_seconds_total | synapse_background_process_ru_utime_seconds |
synapse_background_process_ru_stime_seconds_total | synapse_background_process_ru_stime_seconds |
synapse_background_process_db_txn_count_total | synapse_background_process_db_txn_count |
synapse_background_process_db_txn_duration_seconds_total | synapse_background_process_db_txn_duration_seconds |
synapse_background_process_db_sched_duration_seconds_total | synapse_background_process_db_sched_duration_seconds |
synapse_storage_events_persisted_events_total | synapse_storage_events_persisted_events |
synapse_storage_events_persisted_events_sep_total | synapse_storage_events_persisted_events_sep |
synapse_storage_events_state_delta_total | synapse_storage_events_state_delta |
synapse_storage_events_state_delta_single_event_total | synapse_storage_events_state_delta_single_event |
synapse_storage_events_state_delta_reuse_delta_total | synapse_storage_events_state_delta_reuse_delta |
synapse_federation_server_received_pdus_total | synapse_federation_server_received_pdus |
synapse_federation_server_received_edus_total | synapse_federation_server_received_edus |
synapse_handler_presence_notified_presence_total | synapse_handler_presence_notified_presence |
synapse_handler_presence_federation_presence_out_total | synapse_handler_presence_federation_presence_out |
synapse_handler_presence_presence_updates_total | synapse_handler_presence_presence_updates |
synapse_handler_presence_timers_fired_total | synapse_handler_presence_timers_fired |
synapse_handler_presence_federation_presence_total | synapse_handler_presence_federation_presence |
synapse_handler_presence_bump_active_time_total | synapse_handler_presence_bump_active_time |
synapse_federation_client_sent_edus_total | synapse_federation_client_sent_edus |
synapse_federation_client_sent_pdu_destinations_count_total | synapse_federation_client_sent_pdu_destinations:count |
synapse_federation_client_sent_pdu_destinations_total | synapse_federation_client_sent_pdu_destinations:total |
synapse_handlers_appservice_events_processed_total | synapse_handlers_appservice_events_processed |
synapse_notifier_notified_events_total | synapse_notifier_notified_events |
synapse_push_bulk_push_rule_evaluator_push_rules_invalidation_counter_total | synapse_push_bulk_push_rule_evaluator_push_rules_invalidation_counter |
synapse_push_bulk_push_rule_evaluator_push_rules_state_size_counter_total | synapse_push_bulk_push_rule_evaluator_push_rules_state_size_counter |
synapse_http_httppusher_http_pushes_processed_total | synapse_http_httppusher_http_pushes_processed |
synapse_http_httppusher_http_pushes_failed_total | synapse_http_httppusher_http_pushes_failed |
synapse_http_httppusher_badge_updates_processed_total | synapse_http_httppusher_badge_updates_processed |
synapse_http_httppusher_badge_updates_failed_total | synapse_http_httppusher_badge_updates_failed |
Removal of deprecated metrics & time based counters becoming histograms in 0.31.0
The duplicated metrics deprecated in Synapse 0.27.0 have been removed.
All time duration-based metrics have been changed to be seconds. This affects:
msec -> sec metrics |
---|
python_gc_time |
python_twisted_reactor_tick_time |
synapse_storage_query_time |
synapse_storage_schedule_time |
synapse_storage_transaction_time |
Several metrics have been changed to be histograms, which sort entries into buckets and allow better analysis. The following metrics are now histograms:
Altered metrics |
---|
python_gc_time |
python_twisted_reactor_pending_calls |
python_twisted_reactor_tick_time |
synapse_http_server_response_time_seconds |
synapse_storage_query_time |
synapse_storage_schedule_time |
synapse_storage_transaction_time |
Block and response metrics renamed for 0.27.0
Synapse 0.27.0 begins the process of rationalising the duplicate
*:count
metrics reported for the resource tracking for code blocks and
HTTP requests.
At the same time, the corresponding *:total
metrics are being renamed,
as the :total
suffix no longer makes sense in the absence of a
corresponding :count
metric.
To enable a graceful migration path, this release just adds new names for the metrics being renamed. A future release will remove the old ones.
The following table shows the new metrics, and the old metrics which they are replacing.
New name | Old name |
---|---|
synapse_util_metrics_block_count | synapse_util_metrics_block_timer:count |
synapse_util_metrics_block_count | synapse_util_metrics_block_ru_utime:count |
synapse_util_metrics_block_count | synapse_util_metrics_block_ru_stime:count |
synapse_util_metrics_block_count | synapse_util_metrics_block_db_txn_count:count |
synapse_util_metrics_block_count | synapse_util_metrics_block_db_txn_duration:count |
synapse_util_metrics_block_time_seconds | synapse_util_metrics_block_timer:total |
synapse_util_metrics_block_ru_utime_seconds | synapse_util_metrics_block_ru_utime:total |
synapse_util_metrics_block_ru_stime_seconds | synapse_util_metrics_block_ru_stime:total |
synapse_util_metrics_block_db_txn_count | synapse_util_metrics_block_db_txn_count:total |
synapse_util_metrics_block_db_txn_duration_seconds | synapse_util_metrics_block_db_txn_duration:total |
synapse_http_server_response_count | synapse_http_server_requests |
synapse_http_server_response_count | synapse_http_server_response_time:count |
synapse_http_server_response_count | synapse_http_server_response_ru_utime:count |
synapse_http_server_response_count | synapse_http_server_response_ru_stime:count |
synapse_http_server_response_count | synapse_http_server_response_db_txn_count:count |
synapse_http_server_response_count | synapse_http_server_response_db_txn_duration:count |
synapse_http_server_response_time_seconds | synapse_http_server_response_time:total |
synapse_http_server_response_ru_utime_seconds | synapse_http_server_response_ru_utime:total |
synapse_http_server_response_ru_stime_seconds | synapse_http_server_response_ru_stime:total |
synapse_http_server_response_db_txn_count | synapse_http_server_response_db_txn_count:total |
synapse_http_server_response_db_txn_duration_seconds | synapse_http_server_response_db_txn_duration:total |
Standard Metric Names
As of synapse version 0.18.2, the format of the process-wide metrics has been changed to fit prometheus standard naming conventions. Additionally the units have been changed to seconds, from miliseconds.
New name | Old name |
---|---|
process_cpu_user_seconds_total | process_resource_utime / 1000 |
process_cpu_system_seconds_total | process_resource_stime / 1000 |
process_open_fds (no 'type' label) | process_fds |
The python-specific counts of garbage collector performance have been renamed.
New name | Old name |
---|---|
python_gc_time | reactor_gc_time |
python_gc_unreachable_total | reactor_gc_unreachable |
python_gc_counts | reactor_gc_counts |
The twisted-specific reactor metrics have been renamed.
New name | Old name |
---|---|
python_twisted_reactor_pending_calls | reactor_pending_calls |
python_twisted_reactor_tick_time | reactor_tick_time |