PeerTube/support/nginx/peertube

266 lines
10 KiB
Plaintext
Raw Normal View History

refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
# Minimum Nginx version required: 1.13.0 (released Apr 25, 2017)
# Please check your Nginx installation features the following modules via 'nginx -V':
# STANDARD HTTP MODULES: Core, Proxy, Rewrite, Access, Gzip, Headers, HTTP/2, Log, Real IP, SSL, Thread Pool, Upstream, AIO Multithreading.
# THIRD PARTY MODULES: None.
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
2020-12-30 16:53:11 +01:00
server {
listen 80;
listen [::]:80;
server_name ${WEBSERVER_HOST};
location /.well-known/acme-challenge/ {
default_type "text/plain";
root /var/www/certbot;
}
location / { return 301 https://$host$request_uri; }
}
2016-11-25 14:20:00 +01:00
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
upstream backend {
server ${PEERTUBE_HOST};
}
2016-11-25 14:20:00 +01:00
server {
listen 443 ssl http2;
listen [::]:443 ssl http2;
server_name ${WEBSERVER_HOST};
2016-11-25 14:20:00 +01:00
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
access_log /var/log/nginx/peertube.access.log; # reduce I/0 with buffer=10m flush=5m
error_log /var/log/nginx/peertube.error.log;
##
# Certificates
# you need a certificate to run in production. see https://letsencrypt.org/
##
2020-12-30 16:53:11 +01:00
ssl_certificate /etc/letsencrypt/live/${WEBSERVER_HOST}/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/${WEBSERVER_HOST}/privkey.pem;
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
location ^~ '/.well-known/acme-challenge' {
default_type "text/plain";
root /var/www/certbot;
}
##
# Security hardening (as of Nov 15, 2020)
# based on Mozilla Guideline v5.6
##
2018-02-16 11:04:12 +01:00
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
ssl_protocols TLSv1.2 TLSv1.3;
ssl_prefer_server_ciphers on;
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
ssl_ciphers ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256; # add ECDHE-RSA-AES256-SHA if you want compatibility with Android 4
ssl_session_timeout 1d; # defaults to 5m
ssl_session_cache shared:SSL:10m; # estimated to 40k sessions
ssl_session_tickets off;
ssl_stapling on;
ssl_stapling_verify on;
# HSTS (https://hstspreload.org), requires to be copied in 'location' sections that have add_header directives
#add_header Strict-Transport-Security "max-age=63072000; includeSubDomains";
2018-02-16 11:04:12 +01:00
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
##
# Application
##
2018-02-16 11:04:12 +01:00
location @api {
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
client_max_body_size 100k; # default is 1M
proxy_connect_timeout 10m;
proxy_send_timeout 10m;
proxy_read_timeout 10m;
send_timeout 10m;
proxy_pass http://backend;
}
location / {
try_files /dev/null @api;
}
Resumable video uploads (#3933) * WIP: resumable video uploads relates to #324 * fix review comments * video upload: error handling * fix audio upload * fixes after self review * Update server/controllers/api/videos/index.ts Co-authored-by: Rigel Kent <par@rigelk.eu> * Update server/middlewares/validators/videos/videos.ts Co-authored-by: Rigel Kent <par@rigelk.eu> * Update server/controllers/api/videos/index.ts Co-authored-by: Rigel Kent <par@rigelk.eu> * update after code review * refactor upload route - restore multipart upload route - move resumable to dedicated upload-resumable route - move checks to middleware - do not leak internal fs structure in response * fix yarn.lock upon rebase * factorize addVideo for reuse in both endpoints * add resumable upload API to openapi spec * add initial test and test helper for resumable upload * typings for videoAddResumable middleware * avoid including aws and google packages via node-uploadx, by only including uploadx/core * rename ex-isAudioBg to more explicit name mentioning it is a preview file for audio * add video-upload-tmp-folder-cleaner job * stronger typing of video upload middleware * reduce dependency to @uploadx/core * add audio upload test * refactor resumable uploads cleanup from job to scheduler * refactor resumable uploads scheduler to compare to last execution time * make resumable upload validator to always cleanup on failure * move legacy upload request building outside of uploadVideo test helper * filter upload-resumable middlewares down to POST, PUT, DELETE also begin to type metadata * merge add duration functions * stronger typings and documentation for uploadx behaviour, move init validator up * refactor(client/video-edit): options > uploadxOptions * refactor(client/video-edit): remove obsolete else * scheduler/remove-dangling-resum: rename tag * refactor(server/video): add UploadVideoFiles type * refactor(mw/validators): restructure eslint disable * refactor(mw/validators/videos): rename import * refactor(client/vid-upload): rename html elem id * refactor(sched/remove-dangl): move fn to method * refactor(mw/async): add method typing * refactor(mw/vali/video): double quote > single * refactor(server/upload-resum): express use > all * proper http methud enum server/middlewares/async.ts * properly type http methods * factorize common video upload validation steps * add check for maximum partially uploaded file size * fix audioBg use * fix extname(filename) in addVideo * document parameters for uploadx's resumable protocol * clear META files in scheduler * last audio refactor before cramming preview in the initial POST form data * refactor as mulitpart/form-data initial post request this allows preview/thumbnail uploads alongside the initial request, and cleans up the upload form * Add more tests for resumable uploads * Refactor remove dangling resumable uploads * Prepare changelog * Add more resumable upload tests * Remove user quota check for resumable uploads * Fix upload error handler * Update nginx template for upload-resumable * Cleanup comment * Remove unused express methods * Prefer to use got instead of raw http * Don't retry on error 500 Co-authored-by: Rigel Kent <par@rigelk.eu> Co-authored-by: Rigel Kent <sendmemail@rigelk.eu> Co-authored-by: Chocobozzz <me@florianbigard.com>
2021-05-10 11:13:41 +02:00
location = /api/v1/videos/upload-resumable {
2021-05-11 08:41:34 +02:00
client_max_body_size 0;
proxy_request_buffering off;
Resumable video uploads (#3933) * WIP: resumable video uploads relates to #324 * fix review comments * video upload: error handling * fix audio upload * fixes after self review * Update server/controllers/api/videos/index.ts Co-authored-by: Rigel Kent <par@rigelk.eu> * Update server/middlewares/validators/videos/videos.ts Co-authored-by: Rigel Kent <par@rigelk.eu> * Update server/controllers/api/videos/index.ts Co-authored-by: Rigel Kent <par@rigelk.eu> * update after code review * refactor upload route - restore multipart upload route - move resumable to dedicated upload-resumable route - move checks to middleware - do not leak internal fs structure in response * fix yarn.lock upon rebase * factorize addVideo for reuse in both endpoints * add resumable upload API to openapi spec * add initial test and test helper for resumable upload * typings for videoAddResumable middleware * avoid including aws and google packages via node-uploadx, by only including uploadx/core * rename ex-isAudioBg to more explicit name mentioning it is a preview file for audio * add video-upload-tmp-folder-cleaner job * stronger typing of video upload middleware * reduce dependency to @uploadx/core * add audio upload test * refactor resumable uploads cleanup from job to scheduler * refactor resumable uploads scheduler to compare to last execution time * make resumable upload validator to always cleanup on failure * move legacy upload request building outside of uploadVideo test helper * filter upload-resumable middlewares down to POST, PUT, DELETE also begin to type metadata * merge add duration functions * stronger typings and documentation for uploadx behaviour, move init validator up * refactor(client/video-edit): options > uploadxOptions * refactor(client/video-edit): remove obsolete else * scheduler/remove-dangling-resum: rename tag * refactor(server/video): add UploadVideoFiles type * refactor(mw/validators): restructure eslint disable * refactor(mw/validators/videos): rename import * refactor(client/vid-upload): rename html elem id * refactor(sched/remove-dangl): move fn to method * refactor(mw/async): add method typing * refactor(mw/vali/video): double quote > single * refactor(server/upload-resum): express use > all * proper http methud enum server/middlewares/async.ts * properly type http methods * factorize common video upload validation steps * add check for maximum partially uploaded file size * fix audioBg use * fix extname(filename) in addVideo * document parameters for uploadx's resumable protocol * clear META files in scheduler * last audio refactor before cramming preview in the initial POST form data * refactor as mulitpart/form-data initial post request this allows preview/thumbnail uploads alongside the initial request, and cleans up the upload form * Add more tests for resumable uploads * Refactor remove dangling resumable uploads * Prepare changelog * Add more resumable upload tests * Remove user quota check for resumable uploads * Fix upload error handler * Update nginx template for upload-resumable * Cleanup comment * Remove unused express methods * Prefer to use got instead of raw http * Don't retry on error 500 Co-authored-by: Rigel Kent <par@rigelk.eu> Co-authored-by: Rigel Kent <sendmemail@rigelk.eu> Co-authored-by: Chocobozzz <me@florianbigard.com>
2021-05-10 11:13:41 +02:00
try_files /dev/null @api;
}
location = /api/v1/videos/upload {
limit_except POST HEAD { deny all; }
# This is the maximum upload size, which roughly matches the maximum size of a video file.
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
# Note that temporary space is needed equal to the total size of all concurrent uploads.
# This data gets stored in /var/lib/nginx by default, so you may want to put this directory
# on a dedicated filesystem.
2021-01-31 22:17:30 +01:00
client_max_body_size 12G; # default is 1M
add_header X-File-Maximum-Size 8G always; # inform backend of the set value in bytes before mime-encoding (x * 1.4 >= client_max_body_size)
2018-01-18 17:44:13 +01:00
try_files /dev/null @api;
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
}
2021-02-12 10:04:18 +01:00
location ~ ^/api/v1/(videos|video-playlists|video-channels|users/me) {
client_max_body_size 6M; # default is 1M
add_header X-File-Maximum-Size 4M always; # inform backend of the set value in bytes before mime-encoding (x * 1.4 >= client_max_body_size)
2021-02-12 10:04:18 +01:00
try_files /dev/null @api;
}
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
##
# Websocket
##
location @api_websocket {
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
proxy_http_version 1.1;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
proxy_pass http://backend;
}
location /socket.io {
try_files /dev/null @api_websocket;
}
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
location /tracker/socket {
# Peers send a message to the tracker every 15 minutes
# Don't close the websocket before then
proxy_read_timeout 15m; # default is 60s
try_files /dev/null @api_websocket;
}
2016-11-25 14:20:00 +01:00
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
##
# Performance optimizations
# For extra performance please refer to https://github.com/denji/nginx-tuning
##
root /var/www/peertube/storage;
# Enable compression for JS/CSS/HTML, for improved client load times.
# It might be nice to compress JSON/XML as returned by the API, but
# leaving that out to protect against potential BREACH attack.
gzip on;
gzip_vary on;
gzip_types # text/html is always compressed by HttpGzipModule
text/css
application/javascript
font/truetype
font/opentype
application/vnd.ms-fontobject
image/svg+xml;
gzip_min_length 1000; # default is 20 bytes
gzip_buffers 16 8k;
gzip_comp_level 2; # default is 1
client_body_timeout 30s; # default is 60
client_header_timeout 10s; # default is 60
send_timeout 10s; # default is 60
keepalive_timeout 10s; # default is 75
resolver_timeout 10s; # default is 30
reset_timedout_connection on;
proxy_ignore_client_abort on;
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
tcp_nopush on; # send headers in one piece
tcp_nodelay on; # don't buffer data sent, good for small data bursts in real time
# If you have a small /var/lib partition, it could be interesting to store temp nginx uploads in a different place
# See https://nginx.org/en/docs/http/ngx_http_core_module.html#client_body_temp_path
#client_body_temp_path /var/www/peertube/storage/nginx/;
# Bypass PeerTube for performance reasons. Optional.
# Should be consistent with client-overrides assets list in /server/controllers/client.ts
location ~ ^/client/(assets/images/(icons/icon-36x36\.png|icons/icon-48x48\.png|icons/icon-72x72\.png|icons/icon-96x96\.png|icons/icon-144x144\.png|icons/icon-192x192\.png|icons/icon-512x512\.png|logo\.svg|favicon\.png))$ {
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
add_header Cache-Control "public, max-age=31536000, immutable"; # Cache 1 year
root /var/www/peertube;
try_files /storage/client-overrides/$1 /peertube-latest/client/dist/$1 @api;
}
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
# Bypass PeerTube for performance reasons. Optional.
2019-07-29 14:58:41 +02:00
location ~ ^/client/(.*\.(js|css|png|svg|woff2|otf|ttf|woff|eot))$ {
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
add_header Cache-Control "public, max-age=31536000, immutable"; # Cache 1 year
2018-01-18 17:44:13 +01:00
alias /var/www/peertube/peertube-latest/client/dist/$1;
2018-01-18 17:44:13 +01:00
}
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
# Bypass PeerTube for performance reasons. Optional.
2018-07-24 18:02:23 +02:00
location ~ ^/static/(thumbnails|avatars)/ {
if ($request_method = 'OPTIONS') {
add_header Access-Control-Allow-Origin '*';
add_header Access-Control-Allow-Methods 'GET, OPTIONS';
add_header Access-Control-Allow-Headers 'Range,DNT,X-CustomHeader,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type';
add_header Access-Control-Max-Age 1728000; # Preflight request can be cached 20 days
add_header Content-Type 'text/plain charset=UTF-8';
add_header Content-Length 0;
return 204;
}
add_header Access-Control-Allow-Origin '*';
add_header Access-Control-Allow-Methods 'GET, OPTIONS';
add_header Access-Control-Allow-Headers 'Range,DNT,X-CustomHeader,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type';
add_header Cache-Control "public, max-age=7200"; # Cache response 2 hours
2018-01-18 17:44:13 +01:00
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
rewrite ^/static/(.*)$ /$1 break;
2018-07-24 18:02:23 +02:00
try_files $uri @api;
2018-01-18 17:44:13 +01:00
}
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
# Bypass PeerTube for performance reasons. Optional.
location ~ ^/static/(webseed|redundancy|streaming-playlists)/ {
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
limit_rate_after 5M;
# Clients usually have 4 simultaneous webseed connections, so the real limit is 3MB/s per client
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
set $peertube_limit_rate 800k;
# Increase rate limit in HLS mode, because we don't have multiple simultaneous connections
if ($request_uri ~ -fragmented.mp4$) {
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
set $peertube_limit_rate 5M;
}
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
# Use this line with nginx >= 1.17.0
#limit_rate $peertube_limit_rate;
# Or this line if your nginx < 1.17.0
set $limit_rate $peertube_limit_rate;
2016-11-25 14:20:00 +01:00
if ($request_method = 'OPTIONS') {
add_header Access-Control-Allow-Origin '*';
add_header Access-Control-Allow-Methods 'GET, OPTIONS';
add_header Access-Control-Allow-Headers 'Range,DNT,X-CustomHeader,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type';
add_header Access-Control-Max-Age 1728000; # Preflight request can be cached 20 days
add_header Content-Type 'text/plain charset=UTF-8';
add_header Content-Length 0;
2016-11-25 14:20:00 +01:00
return 204;
}
if ($request_method = 'GET') {
add_header Access-Control-Allow-Origin '*';
add_header Access-Control-Allow-Methods 'GET, OPTIONS';
add_header Access-Control-Allow-Headers 'Range,DNT,X-CustomHeader,Keep-Alive,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type';
2018-01-18 17:44:13 +01:00
# Don't spam access log file with byte range requests
access_log off;
2016-11-25 14:20:00 +01:00
}
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
# Enabling the sendfile directive eliminates the step of copying the data into the buffer
# and enables direct copying data from one file descriptor to another.
sendfile on;
sendfile_max_chunk 1M; # prevent one fast connection from entirely occupying the worker process. should be > 800k.
aio threads;
2018-12-04 17:08:55 +01:00
2021-02-12 10:12:19 +01:00
# Use this in tandem with fuse-mounting i.e. https://docs.joinpeertube.org/admin-remote-storage
# to serve files directly from a public bucket without proxying.
# Assumes you have buckets named after the storage subdirectories, i.e. 'videos', 'redundancy', etc.
#set $cdn <your S3-compatiable bucket public url mounted via fuse>;
#rewrite ^/static/webseed/(.*)$ $cdn/videos/$1 redirect;
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
#rewrite ^/static/(.*)$ $cdn/$1 redirect;
2018-12-04 17:08:55 +01:00
rewrite ^/static/webseed/(.*)$ /videos/$1 break;
refresh nginx config and optimize delivery (#3313) refactors the Nginx configuration for the following points: - update tls version to include 1.3 by default. so far it was not included by default to make room for previous versions of Nginx, but since 2018 Debian stable has included Nginx in version 1.14.1, and tls 1.3 is available since Nginx 1.13.0. - clearly indicate that new minimum required version. - update outdated ssl_ciphers to remove cipher required to support android 4.4, since that version is unsupported since March 2020. - reordered configuration in sections for easier maintenance: performance optimizations are separated from the vital application/websocket parts. - move parts that always require manual configuration at the top: peertube host and server name, use server_name - move peertube host to a more flexible upstream block: it allows to configure it in one place instead of 3, and is future-proof regarding load-balancing. - simplified port 80 block: Let’s Encrypt supports 301 redirects. - group certificate-related config together. - remove reslover config: it defaults to /etc/resolv.conf which is more than enough. - align values with their neighbors for easier reading - always specify units - always specify default values when they differ from the values set - use ’m’ for minutes, ’M’ for megabytes - add consensual optimizations wrt file serving: - add timeout optimizations - add file descriptor cache optimizations - enable sendfile with chunk size > rate limit - enable threading - tcp optimizations - point to further, more system-specific optimizations in the section description - CDN configuration reduced to one line change
2020-11-16 19:16:49 +01:00
rewrite ^/static/(.*)$ /$1 break;
2018-12-04 17:08:55 +01:00
try_files $uri @api;
2016-11-25 14:20:00 +01:00
}
}