Fix last commit

v2/backend/arduino/VideoDisplayTeensy31/VideoDisplayTeensy31.ino

@@ -60,16 +60,15 @@
 
 #include "OctoWS2811.h"
 
-int height;
-int width;
-int ledsPerStrip;
+int height = 0;
+int width = 0;
+int ledsPerStrip = 0;
 
 int count = 0;
-DMAMEM int* displayMemory = 0;
-int* drawingMemory = 0;
+DMAMEM int* displayMemory;
+int* drawingMemory;
 elapsedMicros elapsedUsecSinceLastFrameSync = 0;
 
-
 const int config = WS2811_800kHz; // color config is on the PC side
 
 OctoWS2811 leds;
@@ -77,16 +76,16 @@ OctoWS2811 leds;
 void setup() {
   pinMode(13, OUTPUT);
   digitalWrite(13, HIGH);
-  Serial.setTimeout(50000);
+  Serial.setTimeout(5000);
   //delay(1000);
-  Serial.readBytes((char *)&height, 4);
-  Serial.write(height);
-  Serial.readBytes((char *)&width, 4);
-  Serial.write(width);
+  Serial.readBytes((char *)&height, sizeof(height));
+  Serial.write((char *)&height, sizeof(height));
+  Serial.readBytes((char *)&width, sizeof(width));
+  Serial.write((char *)&width, sizeof(width));
   digitalWrite(13, LOW);
-  pinMode(12, INPUT_PULLUP); // Frame Sync
+  //pinMode(12, INPUT_PULLUP); // Frame Sync
   Serial.setTimeout(50);
-  ledsPerStrip = width * height / 8;
+  ledsPerStrip = width * height;
   displayMemory = new int[ledsPerStrip*6];
   drawingMemory = new int[ledsPerStrip*6];
   leds.attach(ledsPerStrip, displayMemory, drawingMemory, config);
@@ -97,26 +96,29 @@ void setup() {
 void loop() {
   int startChar = Serial.read();
   
-  if (startChar == 42) {
+  if (startChar == '*') {
     unsigned int startAt = micros();
     unsigned int usecUntilFrameSync = 0;
-    count = Serial.readBytes((char *)drawingMemory, sizeof(drawingMemory));
-    if (count >= sizeof(drawingMemory)) {
+    count = Serial.readBytes((char *)drawingMemory, sizeof(int) * ledsPerStrip*6);
+    Serial.write((char *)drawingMemory, sizeof(int) * ledsPerStrip*6);
+    if (count >= sizeof(int) * ledsPerStrip*6) {
       unsigned int endAt = micros();
       unsigned int usToWaitBeforeSyncOutput = 100;
       if (endAt - startAt < usecUntilFrameSync) {
         usToWaitBeforeSyncOutput = usecUntilFrameSync - (endAt - startAt);
       }
-      digitalWrite(12, HIGH);
-      pinMode(12, OUTPUT);
+      //digitalWrite(12, HIGH);
+      //pinMode(12, OUTPUT);
       delayMicroseconds(usToWaitBeforeSyncOutput);
-      digitalWrite(12, LOW);
+      //digitalWrite(12, LOW);
       // WS2811 update begins immediately after falling edge of frame sync
       digitalWrite(13, HIGH);
       leds.show();
       digitalWrite(13, LOW);
     }
   } else if (startChar >= 0) {
+    //Serial.write(startChar);
+    //Serial.flush()
     //digitalWrite(13, HIGH);
     //delay(100);
     //digitalWrite(13, LOW);

v2/backend/forwarding/forward.py

@@ -5,22 +5,25 @@ import time
 from serial import Serial, SerialException
 import sys
 
-height = 5
-width = 8
+height = 50
+width = 20
 
 
 def send(r, s):
-    if not r.exists('new'):
-        return None
-
+    print(r.llen('new'))
     data = r.rpop('new')
     if data is not None and len(data) > 0:
-        s.write(data.encode())
+        a = bytes([ord('*')]) + bytearray(data)
+        #la = len(a)
+        s.write(a)
+        #time.sleep(.05)
+        #data = s.read(la)
+        #print(data)
         # size = s.write(data)
         # print('Data sent ({} bytes)'.format(size))
 
 
-def serialConfigure(port_name, baudrate=9600):
+def serialConfigure(port_name, baudrate=38400):
     '''
         We use a very low baudrate by default because the USB port on the teensy
         enforce this value: http://www.pjrc.com/teensy/td_serial.html
@@ -35,20 +38,23 @@ def serialConfigure(port_name, baudrate=9600):
         sys.stderr.write("Could not open serial port %s: %s\n" % (ser.portstr, e))
         return
 
+    print(height, width)
     ser.write(height.to_bytes(4, byteorder='little'))
-    print(int.from_bytes(ser.read(4), byteorder='little'))
+    data = ser.read(4)
+    print(data, int.from_bytes(data, byteorder='little'))
 
     ser.write(width.to_bytes(4, byteorder='little'))
-    print(int.from_bytes(ser.read(4), byteorder='little'))
+    data = ser.read(4)
+    print(data, int.from_bytes(data, byteorder='little'))
 
     ser.timeout = 1
     return ser
 
 if __name__ == "__main__":
     r = redis.Redis()
-    r.hset('config', 'imgsize', height * width * 24 + 1)
+    r.hset('config', 'imgsize', height * width * 24)
     s = serialConfigure('/dev/ttyACM0')
     while True:
         while r.llen('new') > 0:
             send(r, s)
-        time.sleep(10)
+        time.sleep(1)

v2/backend/processing/PixelControl_TCP/PixelControl_TCP.pyde

@@ -23,7 +23,7 @@ def TCPConfigure(server, port):
     ledTCP = Client(this, server, port)
 
 def image2data(data):
-    offset = 1
+    offset = 0
     pixel_nb = 0
     for x in range(0, height):
         pixel_line = pixels[pixel_nb:pixel_nb+width]
@@ -58,18 +58,17 @@ def colorWiring(c):
 
 def send_TCP():
     image2data(data)
-    println(data)
+    #println(data)
     ledTCP.write(data)
 
 def prepare_data():
     global data
-    data = jarray.zeros(dimension * 24 + 1 , "b")
-    data[0] = ord('*')
+    data = jarray.zeros(dimension * 24, "b")
 
 def setup():
     global gammatable
     global dimension
-    size(5, 8)
+    size(50, 30)
     dimension = width * height
     frameRate(framerate)
     TCPConfigure("127.0.0.1", 9999)